<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">If you remission in house systems or (gag) get used systems, than CPU ***IS*** important. You need to make sure you are running x86_64 with CPU virtualization technology (VT) extensions. You'll need x86_64 to get past the i386 Xen 32meg memory limit, and you'll need VT to provide an update path to RHEL6, vSphere, or even Micro$oft Hyper-V. Many of my customers are running older equipment and are not wanting to upgrade. We are finding that in an HP shop, anything older than DL380 G5 won't cut it. On the Dell side it seems the 1950 is the break point. --- On Fri, 7/24/09, Jeff Sturm <jeff.sturm@eprize.com> wrote: <blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> From: Jeff Sturm <jeff.sturm@eprize.com> Subject: RE: [Linux-cluster] Hardware recommendation To: "linux clustering" <linux-cluster@redhat.com> Date: Friday, July 24, 2009, 6:21 PM <div class="plainMail">Don't go small. If you're running 30-60 virtual machines you'll likely need systems with at least 8 cores at 32GB of RAM, or more depending on the needs of your virtual hosts. There's really no way to guess at how much RAM you'll need without understanding the needs of your virtual hosts, however. Dell PowerEdge hardware should work well for this. We have some old 6950 systems we are now using for Xen. These appear to have been replaced by the R905 series, according to Dell's web site. CPU isn't important. All modern Intel (Core) and AMD processors work well with Xen. To save money I tend to opt for more cores at slower speeds rather than buy the fastest speed processors available. What are you using for storage? If you want node failover you'll likely want some sort of SAN for central storage. I also recommend at least two network switches for redundancy, else you'll regret it the first time you need to reboot a switch without bringing down your cluster. > -----Original Message----- > From: <a ymailto="mailto:linux-cluster-bounces@redhat.com" href="/mc/compose?to=linux-cluster-bounces@redhat.com">linux-cluster-bounces@redhat.com</a> [mailto:<a ymailto="mailto:linux-cluster-bounces@redhat.com" href="/mc/compose?to=linux-cluster-bounces@redhat.com">linux-cluster-bounces@redhat.com</a>] > On Behalf Of Paras pradhan > Sent: Friday, July 24, 2009 6:55 PM > To: linux clustering > Subject: [Linux-cluster] Hardware recommendation > > hi, > > I will be creating a cluster using red hat EL 5.3 consisting of 3 > nodes which will run Xen virtual machines. The first two nodes will > host around 30 virtual machines ( all paravirt Linux and some Solaris > if possible) . The third node will be basically a fail over node and > will host virtual machines if there is a problem at node 1 or node 2. > I do not know if this is the right way to ask but I need > recommendation on which CPU to choose (i7, phenom, quad core or dual > core) and how much RAM do I need on node 1 and node 2 and on also node > 3. And also which server hardware is recommended for my purpose. My > test cluster is based on Dell Poweredge 1800 machines with DRAC 4 > (which I am using for fencing) and looks like DELL Poweregde server > can be a good candidate. > > Any help is highly appreciated. > Thanks > Paras. > > -- > Linux-cluster mailing list > <a ymailto="mailto:Linux-cluster@redhat.com" href="/mc/compose?to=Linux-cluster@redhat.com">Linux-cluster@redhat.com</a> > <a href="https://www.redhat.com/mailman/listinfo/linux-cluster" target="_blank">https://www.redhat.com/mailman/listinfo/linux-cluster</a> -- Linux-cluster mailing list <a ymailto="mailto:Linux-cluster@redhat.com" href="/mc/compose?to=Linux-cluster@redhat.com">Linux-cluster@redhat.com</a> <a href="https://www.redhat.com/mailman/listinfo/linux-cluster" target="_blank">https://www.redhat.com/mailman/listinfo/linux-cluster</a> </div></blockquote></td></tr></table>