<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.0.9"> </HEAD> <BODY> Dear all, I currently run RHAS3.0 on a Dell PE2650 which is directly attached to an EMC FC4500 2TB HW RAID 5 unit via two QLA2310F Fibre Channel cards. I have EMC's Powerpath software installed to give me multiple paths to the disk subsytem in case of controller or cable failure. This configuration has served me well but is now about to be End Of Life'd by Dell and I need to grow the storage. There is obviously quite a price premium to pay for this sort of kit so I was hoping to find a cheaper solution for the future. I have seen the Nexsan ATABEAST which is a 16TB ATA array with dual fibre channel controllers. It seems to be well liked and is reasonably priced but my concern is how to achieve multiple paths to the disk. How would you recommend achieving a highly available configuration with this sort of disk subsystem? Also, am I correct in thinking that the maximum filesystem size with RHEL 3.0 is 2TB? Is it possible to get over this limitation with LVM or some other method? Any advice gladly received. Thanks in advance Gary Mansell -- This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the sender immediately and delete this e-mail from your system. Please note that any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Ricardo (save for reports and other documentation formally approved and signed for release to the intended recipient). Only Directors or Duly Authorised Officers are authorised to enter into legally binding obligations on behalf of Ricardo unless the obligation is contained within a Ricardo Purchase Order. Ricardo may monitor outgoing and incoming e-mails and other telecommunications on its e-mail and telecommunications systems. By replying to this e-mail you give consent to such monitoring. The recipient should check e-mail and any attachments for the presence of viruses. Ricardo accepts no liability for any damage caused by any virus transmitted by this e-mail. "Ricardo" means Ricardo plc and its subsidiary companies. Ricardo plc is a public limited company registered in England with registered number 00222915. The registered office of Ricardo plc is Bridge Works,Shoreham-by Sea, West Sussex, BN43 5FG. </BODY> </HTML>