<DIV>My vg mounts fine under fc3, but when i installed fc4 on a new drive, I cant bring in the vg. I get errors for hdc like "Couldn't find device with uuid..." and PV unknown device (from pvscan). </DIV>
<DIV> </DIV>
<DIV>I can plug back in the old boot drive and run under fc3 and things work well.</DIV>
<DIV> </DIV>
<DIV>The vg consists of 1 lv and 2 pv drives configured as:</DIV>
<DIV> </DIV>
<DIV>my_vg:</DIV>
<DIV>  my_lv1:</DIV>
<DIV>     hdc2 (ext2)</DIV>
<DIV>     hdd (single partition as ext2) </DIV>
<DIV> </DIV>
<DIV>The old hda boot disk is ext3 running FC3 and the new hda boot disk is running the dafault lvm partitions under FC4. </DIV>
<DIV> </DIV>
<DIV>hdc is formatted with boot and swap on hdc1 and hdc5 - probably this was from an earlier install (although I did have these disks plugged in while installing FC4 - when the installer started asking about reformatting hdc and hdd, I powered down, unplugged these drives, and redid the install)</DIV>
<DIV> </DIV>
<DIV>Any ideas to try?</DIV>
<DIV> </DIV>
<DIV>- John</DIV><BR><BR>