From chostert at gmail.com Tue Jan 17 21:00:29 2006 From: chostert at gmail.com (colin hostert) Date: Tue, 17 Jan 2006 16:00:29 -0500 Subject: help with Director failover Message-ID: <560cfed0601171300k59ad9bedw9dc520349f57e37d@mail.gmail.com> Hello ipvsadm v1.24 2.6.9-22.0.1.EL I have a LVS cluster ( 2 Dir, 3 real servers) set up and working, but am having problems with director failover. Everything works great during the failover process except for one thing. When the backup director becomes active, all settings transfer over except for the default gateway(dfgw). Not only dose the correct dfgw not transfer over, but it erases the boxes curent one, so there is no longer a dfgw. Why doesn't the dfgw transfer over, or at least how can I make it so the box keeps its assigned dfgw? Am i missing a line the the conf file (see below), or is it something else? [cluster at RHC02 ha]# vi lvs.cf serial_no = 278 primary = xxx.xxx.xxx.100 service = lvs backup_active = 1 backup = xxx.xxx.xxx.101 heartbeat = 1 heartbeat_port = 539 keepalive = 15 deadtime = 25 network = nat nat_router = 192.168.0.1 eth0 nat_nmask = 255.255.255.0 debug_level = NONE virtual http { active = 1 address = 150.176.247.100 eth1 vip_nmask = 255.255.255.0 port = 80 send = "GET / HTTP/1.0\r\n\r\n" expect = "HTTP" use_regex = 0 load_monitor = none scheduler = wlc protocol = tcp timeout = 6 reentry = 15 quiesce_server = 0 server RHC03 { address = 192.168.0.21 active = 1 weight = 1 } server RHC01 { address = 192.168.0.20 active = 1 weight = 1 } } ---------- Thanks ----------- -------------- next part -------------- An HTML attachment was scrubbed... URL: From U.Criola at patrick.com.au Tue Jan 17 21:00:45 2006 From: U.Criola at patrick.com.au (U.Criola at patrick.com.au) Date: Wed, 18 Jan 2006 08:00:45 +1100 Subject: Out of Office Message-ID: I will be Out of the Office Start Date: 18/01/2006. End Date: 20/01/2006. I will be away from the office Wed 18/1/06 , Thursday 19/1/06 and will be back in on Friday 20/1/06. I will be contactable by email though. From jmlopez at infogroup.es Thu Jan 26 12:37:47 2006 From: jmlopez at infogroup.es (=?iso-8859-1?Q?Jos=E9_Mar=EDa_Lopez_Marzal?=) Date: Thu, 26 Jan 2006 13:37:47 +0100 Subject: Config Piranha Message-ID: <800ABDE53CC66D4EBE0228CC5F11A48301851256@HERMES.infogroup.es> Hi, Well, I'm novel with piranha but I need configure a load balance system in two servers with Piranha. I have installed the software and is running ok. The problem is that now I must configure it in two servers and I don't know very good how doing it. Somebody could help me with this problem. Thanks to all. Chema -------------- next part -------------- An HTML attachment was scrubbed... URL: From irwan at magnifix.com.my Fri Jan 27 01:58:26 2006 From: irwan at magnifix.com.my (Mohd Irwan Jamaluddin) Date: Fri, 27 Jan 2006 09:58:26 +0800 Subject: Config Piranha In-Reply-To: <800ABDE53CC66D4EBE0228CC5F11A48301851256@HERMES.infogroup.es> References: <800ABDE53CC66D4EBE0228CC5F11A48301851256@HERMES.infogroup.es> Message-ID: <1138327106.23926.5.camel@kuli.magnifix.com.my> On Thu, 2006-01-26 at 13:37 +0100, Jos? Mar?a Lopez Marzal wrote: > Hi, > > > > Well, I?m novel with piranha but I need configure a load balance > system in two servers with Piranha. I have installed the software and > is running ok. The problem is that now I must configure it in two > servers and I don?t know very good how doing it. > > > > Somebody could help me with this problem. > > > > Thanks to all. The official manual from Red Hat would be good enough: http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/pt-lvs.html State your problem precisely for people may help you. Please don't forget to mention your RHEL version, kernel version, piranha version etc. -- Regards, +--------------------------------+ | Mohd Irwan Jamaluddin | | ## System Engineer, | | (o_ Magnifix Sdn. Bhd. | | //\ Tel: +603 42705073 | | V_/_ Fax: +603 42701960 | | http://www.magnifix.com/ | +--------------------------------+ From jmlopez at infogroup.es Fri Jan 27 09:57:15 2006 From: jmlopez at infogroup.es (=?iso-8859-1?Q?Jos=E9_Mar=EDa_Lopez_Marzal?=) Date: Fri, 27 Jan 2006 10:57:15 +0100 Subject: Config Piranha Message-ID: <800ABDE53CC66D4EBE0228CC5F11A483018512D0@HERMES.infogroup.es> Hi, Thanks for your answer, Well, My principal problem is that I never configure the software Piranha and I don't know how I have to doing. Like system operator I use Red Hat AS 3.0 with the kernel the it have for default. The version of Piranha is the last one. I hope so somebody can to help me, Thanks to all. Chema. > Hi, > > > > Well, I'm novel with piranha but I need configure a load balance > system in two servers with Piranha. I have installed the software and > is running ok. The problem is that now I must configure it in two > servers and I don't know very good how doing it. > > > > Somebody could help me with this problem. > > > > Thanks to all. The official manual from Red Hat would be good enough: http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/pt-lvs.html State your problem precisely for people may help you. Please don't forget to mention your RHEL version, kernel version, piranha version etc. -- Regards, +--------------------------------+ | Mohd Irwan Jamaluddin | | ## System Engineer, | | (o_ Magnifix Sdn. Bhd. | | //\ Tel: +603 42705073 | | V_/_ Fax: +603 42701960 | | http://www.magnifix.com/ | +--------------------------------+ _______________________________________________ Piranha-list mailing list Piranha-list at redhat.com https://www.redhat.com/mailman/listinfo/piranha-list -------------- next part -------------- An HTML attachment was scrubbed... URL: From eng_ak at link.net Mon Jan 30 09:54:45 2006 From: eng_ak at link.net (Ahmed Kamal) Date: Mon, 30 Jan 2006 11:54:45 +0200 Subject: Load Balancing on two machines only ? Message-ID: <43DDE265.9020700@link.net> Hi group, I have read in the documentation that the reference implementation for load balancing requires (2 director machines, plus all other nodes). However, due to extreme financial conditions, can I use two machines only as both a director plus being a 2 node cluster? i.e. machine1: director + node1 machine2: node2 Is this possible? Appreciating your help Best Regards