<div dir="ltr">It shows up as a coolkey supported card. I will look at the logs and see if I can find anything. </div><div class="gmail_extra"> <div class="gmail_quote">On Tue, Jun 11, 2013 at 12:52 PM, John Magne <<a href="mailto:jmagne@redhat.com" target="_blank">jmagne@redhat.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">First of all, that doesn't sound like it's one of the supported smart cards. That is no sure bet that it won't work though. Second, a look at the tps-debug.log for TPS would help. <div class="HOEnZb"><div class="h5"> ----- Original Message ----- > From: "Brian Henson" <<a href="mailto:marine64@gmail.com">marine64@gmail.com</a>> > To: "Andrew Wnuk" <<a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a>> > Cc: <a href="mailto:pki-users@redhat.com">pki-users@redhat.com</a> > Sent: Monday, June 10, 2013 7:10:04 PM > Subject: Re: [Pki-users] (Fedora 17) PKI-RA fails to start after install > > Only error I am working with now is my test smart card (expresso pro 64k > -fips) shows error 28 when I try to format it using the smart card manager. > Anyone know how to fix that? > > > On Mon, Jun 10, 2013 at 9:55 PM, Brian Henson < <a href="mailto:marine64@gmail.com">marine64@gmail.com</a> > wrote: > > > > Perfect. Changed the two files and it installed perfectly. Thank you for your > help. > > > On Mon, Jun 10, 2013 at 8:39 PM, Andrew Wnuk < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > > > > On 06/10/2013 12:56 PM, Brian Henson wrote: > > > > I have SELinux completely disabled. SHould I skip the semanage part? > Yes, check the earlier comments. > > > > > > > On Mon, Jun 10, 2013 at 12:26 PM, Andrew Wnuk < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > > > > Hi Brian, > > it looks like you may have similar issue to > <a href="https://bugzilla.redhat.com/show_bug.cgi?id=971031" target="_blank">https://bugzilla.redhat.com/show_bug.cgi?id=971031</a> > Could you try solution provided in 971031? > > Thank you, > Andrew > > > On 06/09/2013 06:48 PM, Brian Henson wrote: > > > > Log file > > > On Sun, Jun 9, 2013 at 9:47 PM, Brian Henson < <a href="mailto:marine64@gmail.com">marine64@gmail.com</a> > wrote: > > > > Changed the syntax checking now i get this when starting > > Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link > `pkiuser/logs': No such file or directory > Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create > 'pkiuser/logs' -> '/var/log/pki-tps'! > Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link 'pkiuser/run' > does NOT exist! > Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create > 'pkiuser/run' -> '/var/run/pki/tps' . . . > Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link > `pkiuser/run': No such file or directory > Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create > 'pkiuser/run' -> '/var/run/pki/tps'! > Jun 09 21:43:11 server pkicontrol[1816]: WARNING: Symbolic link > 'pkiuser/conf' does NOT exist! > Jun 09 21:43:11 server pkicontrol[1816]: INFO: Attempting to create > 'pkiuser/conf' -> '/etc/pki-tps' . . . > Jun 09 21:43:11 server pkicontrol[1816]: ln: failed to create symbolic link > `pkiuser/conf': No such file or directory > Jun 09 21:43:11 server pkicontrol[1816]: ERROR: Failed to create > 'pkiuser/conf' -> '/etc/pki-tps'! > > > > On Wed, Jun 5, 2013 at 1:20 PM, Andrew Wnuk < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > > > > On 06/04/2013 02:57 PM, Andrew Wnuk wrote: > > > On 06/03/2013 07:10 AM, Ade Lee wrote: > > > Can you attach the logs under /var/log/pki-tps ? > Also, check /var/log/messages to see if there are any messages there. > > Another thing you can try is to set selinux in permissive mode, and see > if the server starts. > > Ade > You could also try to disable syntax checking in your directory server. > <a href="https://access.redhat.com/site/documentation/en-US/Red_Hat_Directory_Server/8.2/html/Administration_Guide/syntax-validation.html#syntax-validation-basic" target="_blank">https://access.redhat.com/site/documentation/en-US/Red_Hat_Directory_Server/8.2/html/Administration_Guide/syntax-validation.html#syntax-validation-basic</a> > > > > > > > On Fri, 2013-05-31 at 17:46 -0400, Brian Henson wrote: > > > This is the only error i see in the TPS install log [2013-05-29 > 03:37:20] [error] FAILED run_command("/bin/systemctl restart > pki-tpsd@pki-tps.service "), exit status=1 output="Job failed. See > system journal and 'systemctl status' for details." and the same > error(minus service name on the other service) > > > On Fri, May 31, 2013 at 5:14 PM, Andrew Wnuk < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > On 05/31/2013 07:53 AM, Brian Henson wrote: > > I don't mean to sound dumb but where is the logfiles? I am > > using the wiki install page as a guide. > Installation logs are under /var/log with names referring to > subsystems like: pki-ca-install.log, pki-kra-install.log, > pki-tks-install.log, pki-tks-install.log, . . . > Each subsystem has its logs located under subsystem directory. > For example > * CA logs by default are located in /var/log/pki-ca > * TPS logs by default are located in /var/log/pki-tps > * . . . > > > > > > On Thu, May 30, 2013 at 4:01 PM, Andrew Wnuk > > < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > > > > Is there anything in the log files pointing to your > > failure? > > If yes, could you provide these log entries? > > > > On 05/30/2013 11:34 AM, Brian Henson wrote: > > > > > Any Ideas on this? I need the TPS for the > > > smartcard support. > > > > > > > > > On Wed, May 29, 2013 at 1:24 PM, Brian Henson > > > < <a href="mailto:marine64@gmail.com">marine64@gmail.com</a> > wrote: > > > Fedora 17 and dogtag 9 via yum > > > > > > On May 29, 2013 12:01 PM, "Andrew Wnuk" > > > < <a href="mailto:awnuk@redhat.com">awnuk@redhat.com</a> > wrote: > > > > > > On 05/28/2013 09:46 PM, Brian > > > Henson wrote: > > > > > > > Hello all, > > > > > > > > > > > > When I try to configure the RA > > > > subsystem after installing it I > > > > get this error. > > > > > > > > > > > > Installation information > > > > recorded > > > > in /var/log/pki-ra-install.log. > > > > [debug] > > > > run_command(/bin/systemctl > > > > restart pki-rad@pki-ra.service ) > > > > [error] FAILED > > > > run_command("/bin/systemctl > > > > restart > > > > pki-rad@pki-ra.service "), exit > > > > status=1 output="Job failed. See > > > > system journal and 'systemctl > > > > status' for details." > > > > Before proceeding with the > > > > configuration, make sure > > > > the firewall settings of this > > > > machine permit proper > > > > access to this subsystem. > > > > > > > > > > > > Please start the configuration > > > > by accessing: > > > > > > > > > > > > https://(someaddress):12890/ra/admin/console/config/login?pin=XWdsV1oDtx9qQFcybzAr > > > > > > > > > > > > After configuration, the server > > > > can be operated by the command: > > > > > > > > > > > > /bin/systemctl restart > > > > pki-rad@pki-ra.service > > > > > > > > > > > > > > > > > > > > Anyone know how to fix this? I > > > > get it for the TPS module as > > > > well. > > > > > > > > > > > > Thanks > > > > > > > > > > > > Brian Henson > > > > > > > > > > > > > > Brian, > > > > > > Could you provide OS and server > > > versions? > > > > > > Thank you, > > > Andrew > > > > > > > > > > > > > > > > > > > > _______________________________________________ > Pki-users mailing list > <a href="mailto:Pki-users@redhat.com">Pki-users@redhat.com</a> > <a href="https://www.redhat.com/mailman/listinfo/pki-users" target="_blank">https://www.redhat.com/mailman/listinfo/pki-users</a> > > > _______________________________________________ > Pki-users mailing list > <a href="mailto:Pki-users@redhat.com">Pki-users@redhat.com</a> > <a href="https://www.redhat.com/mailman/listinfo/pki-users" target="_blank">https://www.redhat.com/mailman/listinfo/pki-users</a> > > > > > > > > > > _______________________________________________ > Pki-users mailing list > <a href="mailto:Pki-users@redhat.com">Pki-users@redhat.com</a> > <a href="https://www.redhat.com/mailman/listinfo/pki-users" target="_blank">https://www.redhat.com/mailman/listinfo/pki-users</a> </div></div></blockquote></div> </div>