Linux version 2.4.20-30.8.legacy (legacy@yoda.loki.me) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Feb 20 17:47:48 PST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ hdb=ide-scsi ide_setup: hdb=ide-scsi Initializing CPU#0 Detected 2393.995 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 511516k/524224k available (1340k kernel code, 10148k reserved, 999k data, 128k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/3177] at 00:11.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:DMA hda: ST360020A, ATA DISK drive hdb: SONY CD-RW CRX1611, ATAPI CD/DVD-ROM drive blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff) hdd: ST380011A, ATA DISK drive blk: queue c03a6808, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100) hdd: attached ide-disk driver. hdd: host protected area => 1 hdd: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } blk: queue c03a6260, I/O limit 4095Mb (mask 0xffffffff) hdb: DMA disabled ide0: reset: success hda1 hda2 hda3 hda4 < hda5 hda6 > hdd: hdd1 hdd2 < hdd5 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 126k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 128k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 5 for device 00:10.3 PCI: Sharing IRQ 5 with 00:0c.0 ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0 ehci-hcd 00:10.3: irq 5, pci mem e0849000 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:10.3 PCI cache line size corrected to 128. ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 hub.c: USB hub found hub.c: 6 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 1052248k swap-space (priority -1) hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide0: reset: success kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem driver Revision: 1.00 hdb: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: SONY Model: CD-RW CRX1611 Rev: TYS3 Type: CD-ROM ANSI SCSI revision: 02 IA-32 Microcode Update Driver: v1.11 microcode: CPU0 no microcode found! (sig=f27, pflags=4) parport0: PC-style at 0x378 [PCSPP,TRISTATE] ip_tables: (C) 2000-2002 Netfilter core team PCI: Found IRQ 11 for device 00:0a.0 PCI: Sharing IRQ 11 with 00:10.1 ttySHSF0 at I/O 0xc000 (irq = 11) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2002) PCI: Found IRQ 5 for device 00:0c.0 PCI: Sharing IRQ 5 with 00:10.3 0000000.909: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000 ttySHSF1 at I/O 0xc800 (irq = 5) is a Conexant HSF softmodem (PCI-14f1:2f00-14f1:2004) 0000001.336: <7>^^^^^ SPIKE_NOT_FOUND ^^^^^^ LoopBackSpikeThreshold=-17000 usb.c: registered new driver hsfusbcd2 via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written by Donald Becker http://www.scyld.com/network/via-rhine.html PCI: Found IRQ 11 for device 00:12.0 PCI: Sharing IRQ 11 with 00:0d.0 PCI: Sharing IRQ 11 with 00:10.0 divert: allocating divert_blk for eth0 eth0: VIA VT6102 Rhine-II at 0xe400, 00:50:70:c4:10:77, IRQ 11. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 12 for device 00:0b.0 PCI: Sharing IRQ 12 with 00:10.2 PCI: Sharing IRQ 12 with 00:11.5 divert: allocating divert_blk for eth1 eth1: RealTek RTL-8029 found at 0xc400, IRQ 12, 52:54:AB:3E:DC:78.