<P>
  hi<BR>
i am having cisco aironet 350 series working fine on rhel4 es. i just created ifcfg-eth1 in /etc/sysconfig/network-scripts/, with the contents as<BR>
<BR>
DEVICE=eth1<BR>
BOOTPROTO=dhcp<BR>
ONBOOT=no<BR>
ZEROCONF=no<BR>
IPV6INIT=no<BR>
MODE="managed"<BR>
ESSID="linksys"<BR>
KEY3=xxxxxxxxxx<BR>
TYPE=Ethernet<BR>
  <BR>
and giving ifup eth1 will associate with my configured wireless device. <BR>
hope this helps u<BR>
bye<BR>
<BR>
<BR>
<BR>
<BR>
On Sun, 17 Apr 2005 Jaap Hoetmer wrote :<BR>
>I am trying to get my Cisco Aironet 350 series<BR>
>wireless PCMCIA card to work on RHEL4 AS, but it fails<BR>
>to connect to my access point; under WinXP this works<BR>
>fine.<BR>
><BR>
>The adapter was detected correctly, an installed as<BR>
>eth1 accordingly. The ifcfg-eth1 file says:<BR>
># Please read<BR>
>/usr/share/doc/initscripts-*/sysconfig.txt<BR>
># for the documentation of these parameters.<BR>
>IPV6INIT=no<BR>
>ONBOOT=no<BR>
>USERCTL=no<BR>
>PEERDNS=yes<BR>
>GATEWAY=<BR>
>TYPE=Wireless<BR>
>DEVICE=eth1<BR>
>HWADDR=00:0f:f8:4d:ae:70<BR>
>BOOTPROTO=dhcp<BR>
>NETMASK=<BR>
>DHCP_HOSTNAME=<BR>
>IPADDR=<BR>
>DOMAIN=<BR>
>ESSID=retuelle<BR>
>CHANNEL=6<BR>
>MODE=Managed<BR>
>RATE=11Mb/s<BR>
><BR>
>When trying to enable the adapter, it says it tries to<BR>
>retrieve IP address information, but times out<BR>
>eventually, saying it failed.<BR>
><BR>
>dmesg tells me:<BR>
><BR>
>airo:  Probing for PCI adapters<BR>
>airo:  Finished probing for PCI adapters<BR>
>airo: cmd= 111<BR>
>airo: status= 7f11<BR>
>airo: Rsp0= 2<BR>
>airo: Rsp1= 0<BR>
>airo: Rsp2= 0<BR>
>airo: Doing fast bap_reads<BR>
>divert: allocating divert_blk for eth1<BR>
>divert: not allocating divert_blk for non-ethernet<BR>
>device wifi0<BR>
>airo: MAC enabled eth1 0:f:f8:4d:ae:70<BR>
>eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 3, io<BR>
>0x0100-0x013f<BR>
><BR>
>Syslog tells me:<BR>
><BR>
>Apr 16 23:34:55 localhost dhclient: wifi0: unknown<BR>
>hardware address type 801<BR>
>Apr 16 23:34:56 localhost dhclient: wifi0: unknown<BR>
>hardware address type 801<BR>
>Apr 16 23:34:57 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 5<BR>
>Apr 16 23:35:02 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 9<BR>
>Apr 16 23:35:11 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 15<BR>
>Apr 16 23:35:26 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 8<BR>
>Apr 16 23:35:34 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 10<BR>
>Apr 16 23:35:44 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 11<BR>
>Apr 16 23:35:55 localhost dhclient: DHCPDISCOVER on<BR>
>eth1 to 255.255.255.255 port 67 interval 3<BR>
>Apr 16 23:35:58 localhost dhclient: No DHCPOFFERS<BR>
>received.<BR>
><BR>
><BR>
>Can anyone confirm this adapter should work in RHEL4,<BR>
>and provide advice on what to do in order to get it to<BR>
>work?<BR>
><BR>
>Many thanks,<BR>
>Jaap Hoetmer<BR>
><BR>
><BR>
>Send instant messages to your online friends http://uk.messenger.yahoo.com<BR>
><BR>
>_______________________________________________<BR>
>Redhat-install-list mailing list<BR>
>Redhat-install-list@redhat.com<BR>
>https://www.redhat.com/mailman/listinfo/redhat-install-list<BR>
>To Unsubscribe Go To ABOVE URL or send a message to:<BR>
>redhat-install-list-request@redhat.com<BR>
>Subject: unsubscribe<BR>

</P>
<br><br>
<A target="_blank" HREF="http://clients.rediff.com/signature/track_sig.asp"><IMG SRC="http://ads.rediff.com/RealMedia/ads/adstream_nx.cgi/www.rediffmail.com/inbox.htm@Bottom" BORDER=0 VSPACE=0 HSPACE=0></a>