<DIV>hi,ALL</DIV> <DIV>for the dmesg,you can see that some failed errors with the ide interface,so i think some problem with the planar or ide device ,so please check ! maybe you can find the root cause!</DIV> <DIV> Probing IDE interface ide0...<o:p></o:p> ide0: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide2...<o:p></o:p> ide2: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide3...<o:p></o:p> ide3: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide4...<o:p></o:p> ide4: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide5...<o:p></o:p> ide5: Wait for ready failed before probe !<o:p></o:p></DIV> <DIV> </DIV> <DIV> </DIV> <DIV></DIV> 在2007-10-30，"Chen Douglas" <Douglas.Chen@micrel.com> 写道： <BLOCKQUOTE id="isReplyContent" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid"> <DIV class="Section1"> Hi,<o:p></o:p> <o:p> </o:p> I have a Dell Precision 470 running Redhat WS release 4 (linux 2.6.9-5 ELsmp) that crashes every 20 minutes. It was working fine till recently. I tried to reinstall the OS that didn’t help. I think it might be the hardware that cause the problem, but can’t figure out which parts is defected and needs to be replaced from command “dmesg” output. Can anyone tell me what the problem is from the following dmesg message or there are more commands to use to identify the defect parts? Your help is greatly appreciated.<o:p></o:p> <o:p> </o:p> <st1:place w:st="on">Douglas</st1:place><o:p></o:p> <o:p> </o:p> <o:p> </o:p> 0000007fe8ec00 - 0000000080000000 (reserved)<o:p></o:p> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)<o:p></o:p> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)<o:p></o:p> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)<o:p></o:p> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)<o:p></o:p> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)<o:p></o:p> 1150MB HIGHMEM available.<o:p></o:p> 896MB LOWMEM available.<o:p></o:p> found SMP MP-table at 000fe710<o:p></o:p> On node 0 totalpages: 523914<o:p></o:p> DMA zone: 4096 pages, LIFO batch:1<o:p></o:p> Normal zone: 225280 pages, LIFO batch:16<o:p></o:p> HighMem zone: 294538 pages, LIFO batch:16<o:p></o:p> DMI 2.3 present.<o:p></o:p> Using APIC driver default<o:p></o:p> ACPI: RSDP (v000 DELL ) @ 0x000febf0<o:p></o:p> ACPI: RSDT (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcb81<o:p></o:p> ACPI: FADT (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcbc1<o:p></o:p> ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc42bb<o:p></o:p> ACPI: MADT (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcc35<o:p></o:p> ACPI: BOOT (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fccbf<o:p></o:p> ACPI: ASF! (v016 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcce7<o:p></o:p> ACPI: MCFG (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcd4e<o:p></o:p> ACPI: HPET (v001 DELL WS 470 0x00000006 ASL 0x00000061) @ 0x000fcd8c<o:p></o:p> ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000<o:p></o:p> ACPI: PM-Timer IO Port: 0x808<o:p></o:p> ACPI: Local APIC address 0xfee00000<o:p></o:p> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)<o:p></o:p> Processor #0 15:3 APIC version 20<o:p></o:p> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)<o:p></o:p> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)<o:p></o:p> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)<o:p></o:p> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])<o:p></o:p> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])<o:p></o:p> IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23<o:p></o:p> ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])<o:p></o:p> IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47<o:p></o:p> ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])<o:p></o:p> IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71<o:p></o:p> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)<o:p></o:p> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)<o:p></o:p> ACPI: IRQ0 used by override.<o:p></o:p> ACPI: IRQ2 used by override.<o:p></o:p> ACPI: IRQ9 used by override.<o:p></o:p> Enabling APIC mode: Flat. Using 3 I/O APICs<o:p></o:p> ACPI: HPET id: 0x8086a201 base: 0xfed00000<o:p></o:p> Using ACPI (MADT) for SMP configuration information<o:p></o:p> Built 1 zonelists<o:p></o:p> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet<o:p></o:p> Initializing CPU#0<o:p></o:p> CPU 0 irqstacks, hard=c03d8000 soft=c03b8000<o:p></o:p> PID hash table entries: 4096 (order: 12, 65536 bytes)<o:p></o:p> Console: colour VGA+ 80x25<o:p></o:p> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)<o:p></o:p> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)<o:p></o:p> Memory: 2071792k/2095656k available (1819k kernel code, 22896k reserved, 740k data, 172k init, 1178152k highmem)<o:p></o:p> Using HPET for base-timer<o:p></o:p> Using HPET for gettimeofday<o:p></o:p> Detected 2793.447 MHz processor.<o:p></o:p> Using hpet for high-res timesource<o:p></o:p> Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)<o:p></o:p> Security Scaffold v1.0.0 initialized<o:p></o:p> SELinux: Initializing.<o:p></o:p> SELinux: Starting in permissive mode<o:p></o:p> There is already a security framework initialized, register_security failed.<o:p></o:p> selinux_register_security: Registering secondary module capability<o:p></o:p> Capability LSM initialized as secondary<o:p></o:p> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)<o:p></o:p> CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000<o:p></o:p> CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000<o:p></o:p> monitor/mwait feature present.<o:p></o:p> using mwait in idle threads.<o:p></o:p> CPU: Trace cache: 12K uops, L1 D cache: 16K<o:p></o:p> CPU: L2 cache: 1024K<o:p></o:p> CPU: Physical Processor ID: 0<o:p></o:p> CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000080<o:p></o:p> Intel machine check architecture supported.<o:p></o:p> Intel machine check reporting enabled on CPU#0.<o:p></o:p> CPU0: Intel P4/Xeon Extended MCE MSRs (24) available<o:p></o:p> CPU0: Thermal monitoring enabled<o:p></o:p> Enabling fast FPU save and restore... done.<o:p></o:p> Enabling unmasked SIMD FPU exception support... done.<o:p></o:p> Checking 'hlt' instruction... OK.<o:p></o:p> CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04<o:p></o:p> per-CPU timeslice cutoff: 2925.13 usecs.<o:p></o:p> task migration cache decay timeout: 3 msecs.<o:p></o:p> Total of 1 processors activated (5537.79 BogoMIPS).<o:p></o:p> WARNING: 1 siblings found for CPU0, should be 2<o:p></o:p> ENABLING IO-APIC IRQs<o:p></o:p> ..TIMER: vector=0x31 pin1=2 pin2=-1<o:p></o:p> Brought up 1 CPUs<o:p></o:p> zapping low mappings.<o:p></o:p> checking if image is initramfs... it is<o:p></o:p> Freeing initrd memory: 1031k freed<o:p></o:p> NET: Registered protocol family 16<o:p></o:p> PCI: PCI BIOS revision 2.10 entry at 0xfb5e5, last bus=6<o:p></o:p> PCI: Using MMCONFIG<o:p></o:p> mtrr: v2.0 (20020519)<o:p></o:p> ACPI: Subsystem revision 20040816<o:p></o:p> ACPI: Interpreter enabled<o:p></o:p> ACPI: Using IOAPIC for interrupt routing<o:p></o:p> ACPI: <st1:place w:st="on"><st1:PlaceName w:st="on">PCI</st1:PlaceName> <st1:PlaceName w:st="on">Root</st1:PlaceName> <st1:PlaceType w:st="on">Bridge</st1:PlaceType></st1:place> [PCI0] (00:00)<o:p></o:p> PCI: Probing PCI hardware (bus 00)<o:p></o:p> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1<o:p></o:p> PCI: Transparent bridge - 0000:00:1e.0<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]<o:p></o:p> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]<o:p></o:p> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)<o:p></o:p> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)<o:p></o:p> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)<o:p></o:p> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)<o:p></o:p> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.<o:p></o:p> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.<o:p></o:p> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.<o:p></o:p> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)<o:p></o:p> Linux Plug and Play Support v0.97 (c) Adam Belay<o:p></o:p> usbcore: registered new driver usbfs<o:p></o:p> usbcore: registered new driver hub<o:p></o:p> PCI: Using ACPI for IRQ routing<o:p></o:p> ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201<o:p></o:p> ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 209<o:p></o:p> ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> Simple Boot Flag at 0x7a set to 0x80<o:p></o:p> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)<o:p></o:p> apm: overridden by ACPI.<o:p></o:p> audit: initializing netlink socket (disabled)<o:p></o:p> audit(1193675423.742:0): initialized<o:p></o:p> highmem bounce pool size: 64 pages<o:p></o:p> Total HugeTLB memory allocated, 0<o:p></o:p> VFS: Disk quotas dquot_6.5.1<o:p></o:p> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<o:p></o:p> SELinux: Registering netfilter hooks<o:p></o:p> Initializing Cryptographic API<o:p></o:p> ksign: Installing public key data<o:p></o:p> Loading keyring<o:p></o:p> - Added public key E07BC3E85BE30CFD<o:p></o:p> - User ID: Red Hat, Inc. (Kernel Module GPG key)<o:p></o:p> Intel E7520/7320/7525 detected.<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5<o:p></o:p> vesafb: probe of vesafb0 failed with error -6<o:p></o:p> ACPI: Processor [CPU0] (supports C1)<o:p></o:p> Real Time Clock Driver v1.12<o:p></o:p> Linux agpgart interface v0.100 (c) Dave Jones<o:p></o:p> serio: i8042 AUX port at 0x60,0x64 irq 12<o:p></o:p> serio: i8042 KBD port at 0x60,0x64 irq 1<o:p></o:p> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled<o:p></o:p> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<o:p></o:p> ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A<o:p></o:p> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize<o:p></o:p> divert: not allocating divert_blk for non-ethernet device lo<o:p></o:p> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<o:p></o:p> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<o:p></o:p> ICH5: IDE controller at PCI slot 0000:00:1f.1<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> ICH5: chipset revision 2<o:p></o:p> ICH5: not 100% native mode: will probe irqs later<o:p></o:p> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio<o:p></o:p> Probing IDE interface ide1...<o:p></o:p> hdc: SAMSUNG CD-ROM SC-148A, ATAPI CD/DVD-ROM drive<o:p></o:p> Using cfq io scheduler<o:p></o:p> ide1 at 0x170-0x177,0x376 on irq 15<o:p></o:p> Probing IDE interface ide0...<o:p></o:p> ide0: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide2...<o:p></o:p> ide2: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide3...<o:p></o:p> ide3: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide4...<o:p></o:p> ide4: Wait for ready failed before probe !<o:p></o:p> Probing IDE interface ide5...<o:p></o:p> ide5: Wait for ready failed before probe !<o:p></o:p> hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)<o:p></o:p> Uniform CD-ROM driver Revision: 3.20<o:p></o:p> ide-floppy driver 0.99.newide<o:p></o:p> usbcore: registered new driver hiddev<o:p></o:p> usbcore: registered new driver usbhid<o:p></o:p> drivers/usb/input/hid-core.c: v2.0:USB HID core driver<o:p></o:p> mice: PS/2 mouse device common for all mice<o:p></o:p> input: AT Translated Set 2 keyboard on isa0060/serio0<o:p></o:p> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1<o:p></o:p> md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27<o:p></o:p> NET: Registered protocol family 2<o:p></o:p> IP: routing cache hash table of 8192 buckets, 128Kbytes<o:p></o:p> TCP: Hash tables configured (established 262144 bind 43690)<o:p></o:p> Initializing IPsec netlink socket<o:p></o:p> NET: Registered protocol family 1<o:p></o:p> NET: Registered protocol family 17<o:p></o:p> ACPI: (supports S0 S1 S3 S4 S5)<o:p></o:p> ACPI wakeup devices: <o:p></o:p> VBTN PCI0 PCI1 PCI2 PCI3 PCI4 PCI5 PCI6 KBD USB0 USB1 USB2 USB3 <o:p></o:p> Freeing unused kernel memory: 172k freed<o:p></o:p> SCSI subsystem initialized<o:p></o:p> libata version 1.02 loaded.<o:p></o:p> ata_piix version 1.02<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> PCI: Setting latency timer of device 0000:00:1f.2 to 64<o:p></o:p> ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 185<o:p></o:p> ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 185<o:p></o:p> ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3469 86:3c01 87:4003 88:207f<o:p></o:p> ata1: dev 0 ATA, max UDMA/133, 156250000 sectors: lba48<o:p></o:p> ata1: dev 0 configured for UDMA/133<o:p></o:p> scsi0 : ata_piix<o:p></o:p> ata2: SATA port has no device.<o:p></o:p> scsi1 : ata_piix<o:p></o:p> Vendor: ATA Model: ST380013AS Rev: 8.05<o:p></o:p> Type: Direct-Access ANSI SCSI revision: 05<o:p></o:p> SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)<o:p></o:p> SCSI device sda: drive cache: write back<o:p></o:p> sda: sda1 sda2<o:p></o:p> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0<o:p></o:p> device-mapper: 4.1.0-ioctl (2003-12-10) initialised: <A href="mailto:dm@uk.sistina.com">dm@uk.sistina.com</A><o:p></o:p> cdrom: open failed.<o:p></o:p> EXT3-fs: INFO: recovery required on readonly filesystem.<o:p></o:p> EXT3-fs: write access will be enabled during recovery.<o:p></o:p> kjournald starting. Commit interval 5 seconds<o:p></o:p> EXT3-fs: recovery complete.<o:p></o:p> EXT3-fs: mounted filesystem with ordered data mode.<o:p></o:p> SELinux: Disabled at runtime.<o:p></o:p> SELinux: Unregistering netfilter hooks<o:p></o:p> inserting floppy driver for 2.6.9-5.ELsmp<o:p></o:p> Floppy drive(s): fd0 is 1.44M<o:p></o:p> FDC 0 is a post-1991 82077<o:p></o:p> e1000: Ignoring new-style parameters in presence of obsolete ones<o:p></o:p> Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI<o:p></o:p> Copyright (c) 1999-2004 Intel Corporation.<o:p></o:p> ACPI: PCI interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 209<o:p></o:p> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection<o:p></o:p> divert: allocating divert_blk for eth0<o:p></o:p> ip_tables: (C) 2000-2002 Netfilter core team<o:p></o:p> ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201<o:p></o:p> PCI: Setting latency timer of device 0000:00:1f.5 to 64<o:p></o:p> intel8x0_measure_ac97_clock: measured 49591 usecs<o:p></o:p> intel8x0: clocking to 48000<o:p></o:p> hw_random hardware driver 1.0.0 loaded<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193<o:p></o:p> ehci_hcd 0000:00:1d.7: EHCI Host Controller<o:p></o:p> PCI: Setting latency timer of device 0000:00:1d.7 to 64<o:p></o:p> ehci_hcd 0000:00:1d.7: irq 193, pci mem f88ac800<o:p></o:p> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1<o:p></o:p> PCI: cache line size of 128 is not supported by device 0000:00:1d.7<o:p></o:p> ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10<o:p></o:p> hub 1-0:1.0: USB hub found<o:p></o:p> hub 1-0:1.0: 8 ports detected<o:p></o:p> USB Universal Host Controller Interface driver v2.2<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> uhci_hcd 0000:00:1d.0: UHCI Host Controller<o:p></o:p> PCI: Setting latency timer of device 0000:00:1d.0 to 64<o:p></o:p> uhci_hcd 0000:00:1d.0: irq 169, io base 0000ff80<o:p></o:p> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2<o:p></o:p> hub 2-0:1.0: USB hub found<o:p></o:p> hub 2-0:1.0: 2 ports detected<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177<o:p></o:p> uhci_hcd 0000:00:1d.1: UHCI Host Controller<o:p></o:p> e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex<o:p></o:p> PCI: Setting latency timer of device 0000:00:1d.1 to 64<o:p></o:p> uhci_hcd 0000:00:1d.1: irq 177, io base 0000ff60<o:p></o:p> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3<o:p></o:p> hub 3-0:1.0: USB hub found<o:p></o:p> hub 3-0:1.0: 2 ports detected<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185<o:p></o:p> uhci_hcd 0000:00:1d.2: UHCI Host Controller<o:p></o:p> PCI: Setting latency timer of device 0000:00:1d.2 to 64<o:p></o:p> uhci_hcd 0000:00:1d.2: irq 185, io base 0000ff40<o:p></o:p> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4<o:p></o:p> hub 4-0:1.0: USB hub found<o:p></o:p> hub 4-0:1.0: 2 ports detected<o:p></o:p> ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169<o:p></o:p> uhci_hcd 0000:00:1d.3: UHCI Host Controller<o:p></o:p> PCI: Setting latency timer of device 0000:00:1d.3 to 64<o:p></o:p> uhci_hcd 0000:00:1d.3: irq 169, io base 0000ff20<o:p></o:p> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5<o:p></o:p> hub 5-0:1.0: USB hub found<o:p></o:p> hub 5-0:1.0: 2 ports detected<o:p></o:p> md: Autodetecting RAID arrays.<o:p></o:p> md: autorun ...<o:p></o:p> md: ... autorun DONE.<o:p></o:p> NET: Registered protocol family 10<o:p></o:p> Disabled Privacy Extensions on device c0332e60(lo)<o:p></o:p> IPv6 over IPv4 tunneling driver<o:p></o:p> divert: not allocating divert_blk for non-ethernet device sit0<o:p></o:p> ip_tables: (C) 2000-2002 Netfilter core team<o:p></o:p> ACPI: Power Button (FF) [PWRF]<o:p></o:p> eth0: no IPv6 routers present<o:p></o:p> EXT3 FS on dm-0, internal journal<o:p></o:p> cdrom: open failed.<o:p></o:p> kjournald starting. Commit interval 5 seconds<o:p></o:p> EXT3 FS on sda1, internal journal<o:p></o:p> EXT3-fs: mounted filesystem with ordered data mode.<o:p></o:p> Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1<o:p></o:p> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]<o:p></o:p> parport0: irq 7 detected<o:p></o:p> ip_tables: (C) 2000-2002 Netfilter core team<o:p></o:p> ip_tables: (C) 2000-2002 Netfilter core team<o:p></o:p> parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]<o:p></o:p> parport0: irq 7 detected<o:p></o:p> lp0: using parport0 (polling).<o:p></o:p> lp0: console ready<o:p></o:p> usb 1-7: new high speed USB device using address 2<o:p></o:p> Initializing USB Mass Storage driver...<o:p></o:p> scsi2 : SCSI emulation for USB Mass Storage devices<o:p></o:p> Vendor: Model: USB Flash Memory Rev: 1.00<o:p></o:p> Type: Direct-Access ANSI SCSI revision: 02<o:p></o:p> SCSI device sdb: 1001472 512-byte hdwr sectors (513 MB)<o:p></o:p> sdb: Write Protect is off<o:p></o:p> sdb: Mode Sense: 0b 00 00 08<o:p></o:p> sdb: assuming drive cache: write through<o:p></o:p> sdb: sdb1<o:p></o:p> Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0<o:p></o:p> USB Mass Storage device found at 2<o:p></o:p> usbcore: registered new driver usb-storage<o:p></o:p> USB Mass Storage support registered.<o:p></o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p> <o:p> </o:p></DIV></BLOCKQUOTE>  <hr> <a style="font-size:14px;line-height:15px; color:#000; text-decoration:none" href=" http://event.mail.163.com/chanel/click.htm?from=NO_16&domain=126" target="_blank">网易 Yeah.net 邮箱夏日大变脸，带你感受新一代邮箱的全新魅力 >> </a>