<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
ooops! I meant create a fedora version on a flash drive and boot to it<br><br>> From: blann@gte.net<br>> To: redhat-install-list@redhat.com<br>> Subject: Re: Lost FC6 Partition (was Re: This is just amazing...not)<br>> Date: Wed, 8 Sep 2010 03:24:53 -1000<br>> <br>> I tried going thru steps in an earlier reply from a link given to archive by <br>> gonzalo76 on this topic. Had problems with the<br>> grub> root(hd0,x) commands.<br>> Finally went to the Fedora12 DVD kindly sent awhile back by a kind forum <br>> member. The install went extremely smoothly.<br>> I lost home directory files, but will add from back-up. Of importance to me, <br>> the FORTRAN compiler is there and working<br>> on files imported from a USB. I think that this LINUX system is up and <br>> working (and the winXP boots fine) and thank those<br>> who offered help on this. Best wishes to all- always a great group of folks <br>> generous with your time- best wishes,Marshall<br>> ----- Original Message ----- <br>> From: "Rick Stevens" <ricks@nerd.com><br>> To: "Getting started with Red Hat Linux" <redhat-install-list@redhat.com><br>> Sent: Tuesday, September 07, 2010 7:17 AM<br>> Subject: Re: Lost FC6 Partition (was Re: This is just amazing...not)<br>> <br>> <br>> > On 09/06/2010 10:45 PM, Karl Pearson wrote:<br>> >> On Mon, September 6, 2010 9:53 am, blann wrote:<br>> >>> Aloha Karl,<br>> >>>    Below some answers I may have failed to make in text ( and thanks for<br>> >>> your<br>> >>> input):<br>> >>> ----- Original Message -----<br>> >>> From: "Karl Pearson"<karlp@ourldsfamily.com><br>> >>> To: "Getting started with Red Hat Linux"<redhat-install-list@redhat.com><br>> >>> Sent: Saturday, September 04, 2010 11:00 AM<br>> >>> Subject: Re: This is just amazing...<br>> >>><br>> >>><br>> >>>> Please forgive my top-post, but also forgive my response:<br>> >>>><br>> >>>> If you are going to "If I may change the subject" to us, please <br>> >>>> actually<br>> >>>> CHANGE THE SUBJECT (line above).<br>> >>>><br>> >>>> This is called Hijacking A Thread, and isn't very good manners.<br>> >>>><br>> >>>> Now to your email (see below):<br>> >>>><br>> >>>><br>> >>>> On Fri, September 3, 2010 2:58 pm, blann wrote:<br>> >>>>> If I may change the subject and, as usual ask for help (and thanks for<br>> >>>>> past<br>> >>>>> responses):<br>> >>>>>   Many moons back I must have damaged my MBR (winXP,FC6). A helpful<br>> >>>>> member<br>> >>>>> sent a cd with ubuntu , and now there is a boot choice(grub) between<br>> >>>>> that<br>> >>>>> OS<br>> >>>>> and  XP.<br>> >>>><br>> >>>> fdisk /mbr will 'fix' a broken master boot record so you can boot into<br>> >>>> WinXP again, though why anyone would without being coerced to, I don't<br>> >>>> know.<br>> >>>><br>> >>>>><br>> >>>>> I am trying to see if I can restore the grub loader to get into my old<br>> >>>>> FC<br>> >>>>> installation which is likely<br>> >>>>> still on my HD. I have tried my disk1 from  FC6 to do a reinstall, it<br>> >>>>> seems to go thru motions,<br>> >>>>> but a revised grub loader does not come up- even tho I get a message<br>> >>>>> during<br>> >>>>> install<br>> >>>>> that boot loader is being installed- and an installation complete msg.<br>> >>>><br>> >>>> When you installed Ubuntu (Linux Mint is much better IMHO), do you<br>> >>>> remember being asked if you wanted to put it side-by-side with BOTH<br>> >>>> WinXP<br>> >>>> and FC?<br>> >>> I DO NOT RECALL_ MY OLD MEMORY IS BAD<  BUT AT STARTUP A GRUB<br>> >>> LOADER APPEARS<  IT CONTAINS UBUNTU,WINXP, UBUNTU RESCUE, AND<br>> >>> A COUPLE OF MEMORY CHECK OPTIONS. SO THE 'LIVE UBUNTU' SEEMS MOUNTED<br>> >>> WITH WINXP OPTION. The HD organization coming up shows a /dev/hdb with<br>> >>> hdb1<br>> >>> ext3(102mb),<br>> >>> and hdb2 LVM PV (117138 mb)- and /dev/sda with sda1-3 and 5-7<br>> >>> partitions,ntfs,ext3,extended,ntfs,<br>> >>> ext3,swap partitions. I need now after some years to go back and review <br>> >>> my<br>> >>> partitions to ID.<br>> >><br>> >> If you are seeing Grub, then you aren't booting from a Live CD, which you<br>> >> would have to do to use the disk tools necessary to see what partitions<br>> >> can be found.<br>> >><br>> >> I suspect, sadly, that your FC6 partition was over-written by the Ubuntu<br>> >> install.<br>> >><br>> >><br>> >>>><br>> >>>>><br>> >>>>> Is there a way to repair or replace what I am assuming is a damaged<br>> >>>>> mbr/grub<br>> >>>>> loader due to having<br>> >>>>> turned off a hung up XP with AC button?<br>> >>>><br>> >>>> as I wrote above: fdisk /mbr<br>> >>> FDISK sounds like what I may have used years ago to repartition; is it <br>> >>> on<br>> >>> disk 1 of my FC6<br>> >>> install?<br>> >><br>> >> I doubt it. FC6 wasn't a live CD. You can use fdisk from any version of<br>> >> Linux to see the partition table, however, and that may be what you need<br>> >> to do.<br>> >><br>> >> Just run Ubuntu and run fdisk as root (sudo fdisk should work). If you<br>> >> have more than one hard disk in the PC, you will want to run it against<br>> >> each disk to see what partitions.<br>> >><br>> >> FC6 defaulted to ext3, I believe (that may have been FC8???). Rick will<br>> >> know for sure, as well as a few others on this list. It's been a while<br>> >> since I happened on an FC6 install to check.<br>> >><br>> >> In any case, I would recommend that if you are going to use a multiple-OS<br>> >> PC, that you get a new hard disk for each OS, unless you know you'll be<br>> >> using one very sparingly. If that's the case, just run that OS in<br>> >> VirtualBox and be done with it. That's how I run XP at work and home. I<br>> >> think I boot them up about once a week, or less.<br>> >><br>> >>>><br>> >>>>><br>> >>>>> I have, via generosity of an active member of the group, an FC12 set <br>> >>>>> of<br>> >>>>> install disks; have hesitated<br>> >>>>> running this for fear I would overwrite /home directory, whereas the <br>> >>>>> FC<br>> >>>>> Bible advises that simple<br>> >>>>> re-install of FC6 should not do this.<br>> >>>>>    Any comments greatly appreciated! Thanks- Marshall<br>> >><br>> >> You can always download new ISOs from any distributions downloads page,<br>> >> and burn them to DVDs or CDs and take them for a test drive. I use CentOS<br>> >> and FC9 on my servers, and Linux Mint (a derivative of Ubuntu, without <br>> >> all<br>> >> the restrictions) for my desktops and laptop.<br>> >><br>> >> Karl<br>> >><br>> >>>><br>> >>>> Any install of FC will overwrite the home directory, unless <br>> >>>> specifically<br>> >>>> told not to. What I do in these cases is boot to a "live CD" such as<br>> >>>> Mint<br>> >>>> or another Knoppix-like release, then mount the Linux partition, and<br>> >>>> copy<br>> >>>> /home/ME to a USB-attached external device, such as a disk or flash<br>> >>>> drive<br>> >>>> that's big enough to hold the data. With some distributions, you could<br>> >>>> even burn your home directory to a DVD. I also recommend not worrying<br>> >>>> about copying anything other than Documents, etc. Settings are pretty<br>> >>>> easy<br>> >>>> to recreate, actually, and you get to use the functionality of the new<br>> >>>> OS<br>> >>>> better that way, too.<br>> >>>> BETWEEN COMPUTER IN SD AND SOME USB"S I LIKELY HAVE HOME<br>> >>> DIRECTORY BACKED UP- SO MAYBE I'LL GAMBLE.<br>> >>><br>> >>> Thanks again for your help on this- best wishes,Marshall<br>> ><br>> > It was I who sent a bunch of CDs to you, Blann.  And you sent me return<br>> > postage.  Not at all necessary, but kudos to you!<br>> ><br>> > Anyway, FC6 defaults to ext2 filesystems and, if you used logical volumes, <br>> > LVM1.  A live CD of a more current system may not see your<br>> > items because of that (FC8 and later went to ext3 and LVM2).<br>> ><br>> > If you have a CD of FC6, try booting that in rescue mode and see if it<br>> > spots your FC6 installation.  If it does, let it mount it (it'll be<br>> > mounted at /mnt/sysimage).  You can then "chroot /mnt/sysimage" and<br>> > try to reinstall grub to your MBR at that point.  Note that this will<br>> > screw up your existing MBR, so back that up before doing this.  To<br>> > back up the MBR, put some removable, writable media in your machine<br>> > somewhere and copy the first block of your boot drive to it using dd:<br>> ><br>> > dd if=/dev/sda of=/path/to/removable/media/mbr.bak bs=512 count=1<br>> ><br>> > If you can't find appropriate bootable FC6 media, (rummaging through my<br>> > stock of CDs and HD archives of ISO images), I have copies of every<br>> > Fedora release.  To be honest, several I only have DVD images of some<br>> > of them, but I can make copies and shoot them to you as I did before.<br>> ><br>> > ----------------------------------------------------------------------<br>> > - Rick Stevens, Systems Engineer, C2 Hosting          ricks@nerd.com -<br>> > - AIM/Skype: therps2        ICQ: 22643734            Yahoo: origrps2 -<br>> > -                                                                    -<br>> > -   Trying to make digital files uncopyable is like trying to make   -<br>> > -                    water not wet. -- Bruce Schneier                -<br>> > ----------------------------------------------------------------------<br>> ><br>> > _______________________________________________<br>> > Redhat-install-list mailing list<br>> > Redhat-install-list@redhat.com<br>> > https://www.redhat.com/mailman/listinfo/redhat-install-list<br>> > To Unsubscribe Go To ABOVE URL or send a message to:<br>> > redhat-install-list-request@redhat.com<br>> > Subject: unsubscribe<br>> > <br>> <br>> <br>> _______________________________________________<br>> Redhat-install-list mailing list<br>> Redhat-install-list@redhat.com<br>> https://www.redhat.com/mailman/listinfo/redhat-install-list<br>> To Unsubscribe Go To ABOVE URL or send a message to:<br>> redhat-install-list-request@redhat.com<br>> Subject: unsubscribe<br>                                    </body>
</html>