<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"> <TITLE>RE: new to list / network eth0 issue</TITLE> <META content="MSHTML 6.00.2800.1400" name=GENERATOR></HEAD> <BODY> <DIV>Did you add a route to the network? your Routing table needs to know where to go.</DIV> <DIV> </DIV> <DIV>route add -net 0.0.0.0 gw GATEWAYIP netmask 255.255.255.0 INTERFACE_ALIAS (eth0)</DIV> <DIV> </DIV> <DIV>You can add it to the /etc/rc.local to preserve on reboot.</DIV> Tim Pickard Systems Support Analyst and Administrator 40 Salem Street Lynnfield, MA 01940 p.781-295-0072 f.781-295-0077 tpickard@crossref.org <BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px"> <DIV class=OutlookMessageHeader dir=ltr align=left>-----Original Message----- From: Johnson, Shaunn [mailto:SJohnson6@bcbsm.com] Sent: Wednesday, April 28, 2004 2:50 PM To: 'General Red Hat Linux discussion list' Subject: RE: new to list / network eth0 issue </DIV> --thanks all. --both mii-tool and ethtool are on RHEL v. 3 - they both look --great; i have made the change, but i still can not reach --the server. i think the IS team has made an error - it --may be the switch, but that just seems silly - --i'm beginning to think it's either windows 200x or just --add the 2nd card and route my way around it. --will work on it - thanks again! -X -----Original Message----- From: Jeff [<A href="mailto:jeff@virgin.net">mailto:jeff@virgin.net</A>] [snip] not sure if the same applies on RHEL but in RH9, just run 'ethtool' as root - dead simple to use. HTH Jeff </BLOCKQUOTE></BODY></HTML>