<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML xmlns:o = "urn:schemas-microsoft-com:office:office"><HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii"> <TITLE>Message</TITLE> <STYLE> .hmmessage P { margin:0px; padding:0px } body.hmmessage { FONT-SIZE: 10pt; FONT-FAMILY:Tahoma } </STYLE> <META content="MSHTML 6.00.6000.16640" name=GENERATOR></HEAD> <BODY class=hmmessage> <DIV>Tina,</DIV> <DIV>Is there any chance that host 1 is set to "write-through" and host 2 is set to dirty (trust me) writes on the hardware disk controller or on the database driver? Note how host 1 waits until all reading is done prior to the first write - host 2 has simultaneous read/writing.</DIV> <DIV> </DIV> <DIV>Bill Watson</DIV> <DIV><A href="mailto:bill@magicdigits.com">bill@magicdigits.com</A></DIV> <BLOCKQUOTE style="MARGIN-RIGHT: 0px"> <DIV></DIV> <DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>-----Original Message----- From: redhat-sysadmin-list-bounces@redhat.com [mailto:redhat-sysadmin-list-bounces@redhat.com] On Behalf Of Tina Tian Sent: Monday, May 12, 2008 2:00 PM To: redhat-sysadmin-list@redhat.com Subject: RE: Different performance </DIV>I just did two tests. Belows are the vmstat output from the tests. Test 1: dd if=/dev/zero of=dd_out.out bs=1MB count=700 ( dd_out.out creates a file on the same folder of database file). As suggested by Doungwu. vmstat 2 20 on host 1: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----<o:p></o:p> r b swpd free buff cache si so bi bo in cs us sy id wa<o:p></o:p> 0 0 168 622076 76312 1279844 0 0 1 0 0 0 0 0 100 0<o:p></o:p> 0 0 168 622076 76312 1279844 0 0 0 0 1003 133 0 0 100 0<o:p></o:p> 1 0 168 967084 76312 935864 0 0 0 0 1004 136 0 4 96 0<o:p></o:p><SPAN style="FONT-SIZE: 9pt; FONT-FAMILY: 'Courier New'; mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"> 0 2 168 573380 76372 1320864 0 0 2 130386 1317 352 0 9 72 18 <SPAN style="FONT-SIZE: 9pt; FONT-FAMILY: 'Courier New'; mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"> <SPAN style="FONT-SIZE: 9pt; FONT-FAMILY: 'Courier New'; mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"> vmstat 2 20 on host 2: <SPAN style="FONT-SIZE: 9pt; FONT-FAMILY: 'Courier New'; mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'Times New Roman'; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA"> procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----<o:p></o:p> r b swpd free buff cache si so bi bo in cs us sy id wa<o:p></o:p> 0 0 11716 699612 229432 723212 0 0 1 0 1 0 1 1 98 0<o:p></o:p> 2 1 11716 358916 229748 1060636 0 0 0 27648 1057 457 0 7 88 5<o:p></o:p> 0 1 11716 11328 230080 1402984 0 0 0 141598 1205 512 0 9 72 20<o:p></o:p> <o:p></o:p> Test 2: load a ascii data file to the sybase databae on host1 and host2. vmstat 2 20 on host 1: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----<o:p></o:p> r b swpd free buff cache si so bi bo in cs us sy id wa<o:p></o:p> 0 0 168 1106604 78268 797408 0 0 1 0 0 0 0 0 100 0<o:p></o:p> 2 0 168 1104076 78300 799456 0 0 1092 58 1034 175 2 1 96 1<o:p></o:p> 2 0 168 1090124 78316 813480 0 0 6984 0 1102 181 16 9 75 0<o:p></o:p> 2 0 168 1076108 78332 827244 0 0 6984 0 1101 182 16 9 75 0<o:p></o:p> 0 1 168 1070044 78368 832928 0 0 2738 1168 1187 400 6 2 82 10<o:p></o:p> 0 1 168 1069980 78372 832924 0 0 2 1388 1177 364 0 0 87 12<o:p></o:p> 0 1 168 1070012 78380 832916 0 0 0 1494 1190 392 0 0 88 12<o:p></o:p> 0 1 168 1070068 78388 832908 0 0 0 1382 1175 361 0 0 87 12<o:p></o:p> 0 1 168 1070068 78388 832908 0 0 0 1324 1168 345 0 0 87 12<o:p></o:p> 0 1 168 1069996 78396 832900 0 0 0 1426 1181 373 0 0 88 12<o:p></o:p> 0 1 168 1069996 78396 832900 0 0 0 1488 1188 387 0 0 87 12<o:p></o:p> 0 1 168 1070052 78404 832892 0 0 0 1422 1181 374 0 0 87 12<o:p></o:p> 0 1 168 1070052 78404 832892 0 0 0 1316 1167 343 0 0 88 12<o:p></o:p> 0 0 168 1070428 78404 832892 0 0 0 690 1093 245 0 0 94 6<o:p></o:p> vmstat 2 20 on host 2: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu----<o:p></o:p> r b swpd free buff cache si so bi bo in cs us sy id wa<o:p></o:p> 1 0 11716 8156 230820 1412904 0 0 1 0 1 0 1 1 98 0<o:p></o:p> 0 0 11716 9784 230820 1412904 0 0 0 0 1008 1078 0 0 99 0<o:p></o:p> 2 0 11716 4680 230852 1417292 0 0 2328 44 1061 462 5 3 92 1<o:p></o:p> 2 0 11716 4440 230216 1417928 0 0 6936 3330 1515 1309 15 9 74 1<o:p></o:p> 2 0 11716 4824 226236 1421908 0 0 6862 5060 1736 1740 16 9 75 1<o:p></o:p> 0 0 11716 4676 219492 1429432 0 0 1912 4786 1636 1615 5 3 92 0<o:p></o:p> 0 0 11716 6884 217968 1428616 0 0 64 6 1015 1100 2 0 97 1<o:p></o:p> Can you see something special? Thank you, Tina <BLOCKQUOTE> <HR> Date: Mon, 12 May 2008 13:59:43 -0500 From: jolt@ti.com To: redhat-sysadmin-list@redhat.com Subject: RE: Different performance <META content="Microsoft SafeHTML" name=Generator> <STYLE> .ExternalClass .EC_shape {;} </STYLE> <STYLE> </STYLE> <STYLE> .ExternalClass p.EC_MsoNormal, .ExternalClass li.EC_MsoNormal, .ExternalClass div.EC_MsoNormal {margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass a:link, .ExternalClass span.EC_MsoHyperlink {color:blue;text-decoration:underline;} .ExternalClass a:visited, .ExternalClass span.EC_MsoHyperlinkFollowed {color:blue;text-decoration:underline;} .ExternalClass p {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal, .ExternalClass li.EC_ecmsonormal, .ExternalClass div.EC_ecmsonormal {margin-right:0in;margin-left:0in;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal1, .ExternalClass li.EC_ecmsonormal1, .ExternalClass div.EC_ecmsonormal1 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal2, .ExternalClass li.EC_ecmsonormal2, .ExternalClass div.EC_ecmsonormal2 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal3, .ExternalClass li.EC_ecmsonormal3, .ExternalClass div.EC_ecmsonormal3 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal4, .ExternalClass li.EC_ecmsonormal4, .ExternalClass div.EC_ecmsonormal4 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass p.EC_ecmsonormal5, .ExternalClass li.EC_ecmsonormal5, .ExternalClass div.EC_ecmsonormal5 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink1 {color:blue;text-decoration:underline;} .ExternalClass p.EC_ecmsonormal6, .ExternalClass li.EC_ecmsonormal6, .ExternalClass div.EC_ecmsonormal6 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink2 {color:blue;text-decoration:underline;} .ExternalClass p.EC_ecmsonormal7, .ExternalClass li.EC_ecmsonormal7, .ExternalClass div.EC_ecmsonormal7 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink3 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecmsohyperlinkfollowed1 {color:blue;text-decoration:underline;} .ExternalClass p.EC_ecmsonormal8, .ExternalClass li.EC_ecmsonormal8, .ExternalClass div.EC_ecmsonormal8 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink4 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecmsohyperlinkfollowed2 {color:blue;text-decoration:underline;} .ExternalClass p.EC_ecmsonormal9, .ExternalClass li.EC_ecmsonormal9, .ExternalClass div.EC_ecmsonormal9 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink5 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecmsohyperlinkfollowed3 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecemailstyle181 {font-family:Arial;color:navy;} .ExternalClass p.EC_ecmsonormal10, .ExternalClass li.EC_ecmsonormal10, .ExternalClass div.EC_ecmsonormal10 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink6 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecmsohyperlinkfollowed4 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecemailstyle182 {font-family:Arial;color:navy;} .ExternalClass p.EC_ecmsonormal11, .ExternalClass li.EC_ecmsonormal11, .ExternalClass div.EC_ecmsonormal11 {margin-right:0in;margin-bottom:0in;margin-left:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:'Times New Roman';} .ExternalClass span.EC_ecmsohyperlink7 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecmsohyperlinkfollowed5 {color:blue;text-decoration:underline;} .ExternalClass span.EC_ecemailstyle183 {font-family:Arial;color:navy;} .ExternalClass span.EC_EmailStyle49 {font-family:Arial;color:navy;} @page Section1 {size:8.5in 11.0in;} .ExternalClass div.EC_Section1 {page:Section1;} </STYLE> <DIV class=EC_Section1> Tina, Could you run a vmstat output while under load to see how much memory is swapping and how quickly context switching is occurring? “vmstat 5 20” Also, what kernel is running? “uname –a” <DIV> <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> From: redhat-sysadmin-list-bounces@redhat.com [mailto:redhat-sysadmin-list-bounces@redhat.com] On Behalf Of Tina Tian Sent: Monday, May 12, 2008 1:37 PM To: redhat-sysadmin-list@redhat.com Subject: RE: Different performance</DIV> Thank you, Joseph. Let me explain it. On both host 1 and host2, sybase software is in /sybase and sybase database is in /sybasedata. On host 2, we have amada backup software in /dev/sdc and I believe some amada demon was running when I ran iostat. (> From the output of host 2 you provided, the first stat shows sdc is taking some of the load). Host 2 do have additional higher performance drivers which are not being used by sybase database (/sybasedata) at all. Will database be benefit from their quicker swap? Belows are results from fdisk/mount/dmesg(swap) on host1 and host2. Host 1, fdisk -l: ----------------- Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ de Dell Utility /dev/sda2 5 1279 10241437+ 83 Linux /dev/sda3 * 1280 1406 1020127+ 83 Linux /dev/sda4 1407 8844 59745735 5 Extended /dev/sda5 1407 8844 59745703+ 8e Linux LVM Disk /dev/sdb: 598.8 GB, 598879502336 bytes 255 heads, 63 sectors/track, 72809 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 66868 537117178+ 83 Linux /dev/sdb2 66869 72809 47721082+ 5 Extended host 1, mount: --------------- /dev/mapper/VolGroup_ID_27777-LogVol2 on / type ext3 (rw) none on /proc type proc (rw) none on /sys type sysfs (rw) none on /dev/pts type devpts (rw,gid=5,mode=620) usbfs on /proc/bus/usb type usbfs (rw) /dev/sda3 on /boot type ext3 (rw) none on /dev/shm type tmpfs (rw) /dev/mapper/VolGroup_ID_27777-LogVol3 on /tmp type ext3 (rw) /dev/mapper/VolGroup_ID_27777-LogVol6 on /usr type ext3 (rw) /dev/mapper/VolGroup_ID_27777-LogVol5 on /var type ext3 (rw) /dev/mapper/VolGroup_ID_27777-LogVolHome on /home type ext3 (rw) /dev/mapper/VolGroup_ID_27777-LogVolSybase on /sybase type ext3 (rw) /dev/mapper/VolGroup_ID_27777-LogVolTranLog on /tranlog type ext3 (rw) /dev/sdb1 on /sybasedata type ext3 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) Host 1, dmesg|grep swap ------------------------ Adding 1998840k swap on /dev/VolGroup_ID_27777/LogVol1. Priority:-1 extents:1 Adding 2097144k swap on /dev/VolGroup_ID_27777/LogVol0. Priority:-2 extents:1 Host 2, fdisk -l ---------------- Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 4 32098+ de Dell Utility /dev/sda2 5 1534 12289725 83 Linux /dev/sda3 * 1535 1661 1020127+ 83 Linux /dev/sda4 1662 8844 57697447+ 5 Extended /dev/sda5 1662 8844 57697416 8e Linux LVM Disk /dev/sdb: 598.8 GB, 598879502336 bytes 255 heads, 63 sectors/track, 72809 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 72809 584838261 83 Linux Disk /dev/sdc: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 4370 35101993+ 83 Linux /dev/sdc2 4371 36404 257313105 83 Linux Disk /dev/sdd: 320.0 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 38913 312568641 83 Linux host 2, mount: --------------- /dev/mapper/VolGroup_ID_787-LogVol1 on / type ext3 (rw) none on /proc type proc (rw) none on /sys type sysfs (rw) none on /dev/pts type devpts (rw,gid=5,mode=620) usbfs on /proc/bus/usb type usbfs (rw) /dev/sda3 on /boot type ext3 (rw) none on /dev/shm type tmpfs (rw) /dev/mapper/VolGroup_ID_787-LogVol2 on /tmp type ext3 (rw) /dev/mapper/VolGroup_ID_787-LogVol5 on /usr type ext3 (rw) /dev/mapper/VolGroup_ID_787-LogVol4 on /var type ext3 (rw) /dev/mapper/VolGroup_ID_787-LogVolHome on /home type ext3 (rw) /dev/mapper/VolGroup_ID_787-LogVolSybase on /sybase type ext3 (rw) /dev/mapper/VolGroup_ID_787-LogVolTranlog on /tranlog type ext3 (rw) /dev/sdb1 on /sybasedata type ext3 (rw) /dev/sdc1 on /pkgs type ext3 (rw) /dev/sdc2 on /amanda-data type ext3 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) host 2 dmesg |grep swap: ------------------------ host 1 : dmesg |grep swap Adding 1769464k swap on /dev/VolGroup_ID_787/LogVol0. Priority:-1 extents:1 Best Regards, Tina <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> Date: Mon, 12 May 2008 07:11:12 -0500 From: jolt@ti.com To: redhat-sysadmin-list@redhat.com Subject: RE: Different performance <DIV> Tina, How are the partitions laid out on the two systems? It is likely that something OS related is accessing sda and sdb or host 1 while being spread across more disks in host 2. From the output of host 2 you provided, the first stat shows sdc is taking some of the load. Regardless of the RAM being the same in both systems, is there much swapping? Swapping on higher performance drives will be quicker. Regards, Joseph <DIV> <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> From: redhat-sysadmin-list-bounces@redhat.com [mailto:redhat-sysadmin-list-bounces@redhat.com] On Behalf Of Tina Tian Sent: Friday, May 09, 2008 10:42 PM To: redhat-sysadmin-list@redhat.com Subject: RE: Different performance</DIV> The DB is Sybase ASE 15.0.2. Identical configuration on two hosts. My SA also confirmed that two hosts are almost identical except host2(faster DB load) has extra two disks sdc and sdd, sdc and sdd are with higer RPM=15k. The rest of disks sda and adb are identical on two hosts, with RPM=7k. On both host 1 and host 2, DBs are on /dev/sdb only. Best Regards, Tina <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> To: redhat-sysadmin-list@redhat.com Date: Fri, 9 May 2008 16:58:19 -0600 From: larry.sorensen@juno.com Subject: Re: Different performance <DIV> Please include information on the databases including versions. It could just be different configurations on the databases. Are the patches up to date and equal on both servers?</DIV> <DIV> </DIV> <DIV> On Fri, 9 May 2008 14:11:25 -0700 Tina Tian <<A href="mailto:tinatianxia@hotmail.com">tinatianxia@hotmail.com</A>> writes:</DIV> <BLOCKQUOTE style="BORDER-RIGHT: medium none; PADDING-RIGHT: 0in; BORDER-TOP: medium none; PADDING-LEFT: 8pt; MARGIN-BOTTOM: 5pt; PADDING-BOTTOM: 0in; MARGIN-LEFT: 7.5pt; BORDER-LEFT: black 1.5pt solid; PADDING-TOP: 0in; BORDER-BOTTOM: medium none"> <DIV> I am a DBA. I have identical database servers running on two Linux redhat 4, host 1 and host 2. When I was running the same bulk load to database (load a data file to database), host 2 was much faster than host 1. On both host1 and host2, database are using file system mount on /dev/sda and /dev/sdb. I checked with my SA, host1 and host2 have same CPU, RAM, file system configuration. The only different is that host 2 has extra HD capacity with higher 15k RPM. But the extra 2 HDs(sdc and sdd) are dedicated to other applications, not used by database at all. My questions are: ----------------- 1. On host2 (faster), the extra faster HDs(/dev/sdc and sdd) are not used by database. Does it still affect IO performance of /dev/sda and /dev/sdb ? 2. During database bulk load testing, host 1(slower) shows longer service IO time (svctm) and longer IO waiting time(await). What other possible reason can cause this problem? Any idea? I did post the same issue to database discussion group and they suggested me to check OS performance(svctm). Below is the result from iostat on host1(slower) and host2(faster) during bulk load: Host 1: iostat -x 2 =====================</DIV> avg-cpu: %user %nice %sys %iowait %idle 0.15 0.00 0.07 0.28 99.49 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.01 0.59 0.24 0.19 29.22 6.17 14.61 3.08 83.49 0.01 21.71 3.84 0.16 sdb 0.04 10.05 0.89 3.74 117.37 110.34 58.69 55.17 49.13 0.10 21.76 4.48 2.08 avg-cpu: %user %nice %sys %iowait %idle 15.74 0.00 8.99 0.31 74.95 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.99 0.00 57.71 0.00 14025.87 0.00 7012.94 0.00 243.03 0.21 3.58 3.53 20.35 sdb 0.00 0.00 11.94 0.00 95.52 0.00 47.76 0.00 8.00 0.02 2.04 2.04 2.44 avg-cpu: %user %nice %sys %iowait %idle 6.18 0.00 2.37 9.24 82.20 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.50 0.50 23.00 1.00 5732.00 12.00 2866.00 6.00 239.33 0.07 3.08 3.02 7.25 sdb 0.00 129.00 7.00 130.00 56.00 2076.00 28.00 1038.00 15.56 0.75 5.49 5.40 73.95 avg-cpu: %user %nice %sys %iowait %idle 0.06 0.00 0.12 12.44 87.38 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 3.50 0.00 3.00 0.00 52.00 0.00 26.00 17.33 0.03 10.00 3.67 1.10 sdb 0.00 182.50 0.00 182.50 0.00 2920.00 0.00 1460.00 16.00 0.99 5.44 5.44 99.30 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.12 12.49 87.38 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 0.50 0.00 1.01 0.00 12.06 0.00 6.03 12.00 0.01 6.00 6.00 0.60 sdb 0.00 184.92 0.00 185.43 0.00 2962.81 0.00 1481.41 15.98 1.01 5.45 5.38 99.70 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.06 12.43 87.51 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb 0.00 184.08 0.00 184.08 0.00 2945.27 0.00 1472.64 16.00 0.99 5.39 5.38 99.00 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.12 12.31 87.56 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1.00 0.00 1.50 0.00 20.00 0.00 10.00 13.33 0.02 15.33 6.67 1.00 sdb 0.00 181.00 0.00 181.00 0.00 2896.00 0.00 1448.00 16.00 0.99 5.48 5.49 99.40 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.19 12.37 87.45 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb 0.00 178.00 0.00 178.50 0.00 2852.00 0.00 1426.00 15.98 1.00 5.61 5.55 99.10 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.12 12.37 87.51 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb 0.00 179.50 0.00 179.50 0.00 2872.00 0.00 1436.00 16.00 0.99 5.52 5.53 99.25 avg-cpu: %user %nice %sys %iowait %idle 0.00 0.00 0.06 12.44 87.50 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1.50 0.00 3.50 0.00 40.00 0.00 20.00 11.43 0.07 20.00 4.00 1.40 sdb 0.00 179.00 0.00 179.50 0.00 2868.00 0.00 1434.00 15.98 1.02 5.68 5.53 99.30 avg-cpu: %user %nice %sys %iowait %idle 0.06 0.00 0.19 12.41 87.34 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 0.50 0.00 1.00 0.00 12.00 0.00 6.00 12.00 0.01 6.50 6.50 0.65 sdb 0.00 183.50 0.00 183.50 0.00 2936.00 0.00 1468.00 16.00 0.99 5.40 5.41 99.25 Host 2: iostat -x 2 ================== avg-cpu: %user %nice %sys %iowait %idle 0.96 0.00 0.69 0.21 98.15 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util hda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 48.00 0.00 1.33 1.33 0.00 sda 0.01 5.31 0.23 1.55 17.96 54.93 8.98 27.47 40.76 0.07 41.59 1.21 0.22 sdb 0.03 3.99 0.84 0.47 113.52 35.67 56.76 17.83 114.36 0.03 23.00 2.55 0.33 sdc 0.05 37.80 0.58 1.50 131.96 314.37 65.98 157.19 214.93 0.43 205.85 2.84 0.59 sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 40.35 0.00 3.52 3.52 0.00 avg-cpu: %user %nice %sys %iowait %idle 16.03 0.00 8.61 0.44 74.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util hda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda 1.99 14.43 57.71 6.97 13775.12 171.14 6887.56 85.57 215.63 0.22 3.43 3.36 21.74 sdb 0.00 357.71 7.96 358.71 63.68 5731.34 31.84 2865.67 15.80 0.04 0.10 0.10 3.83 sdc 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 avg-cpu: %user %nice %sys %iowait %idle 15.62 0.00 8.81 0.56 75.00 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util hda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda 1.50 0.00 56.00 0.00 13964.00 0.00 6982.00 0.00 249.36 0.22 3.90 3.89 21.80 sdb 0.00 635.00 7.00 635.00 64.00 10160.00 32.00 5080.00 15.93 0.06 0.09 0.09 5.55 sdc 0.00 1.00 0.00 1.50 0.00 20.00 0.00 10.00 13.33 0.00 0.00 0.00 0.00 sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 Thanks, Tina <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> Sign in and you could WIN! Enter for your chance to win $1000 every day. <A href="http://g.msn.ca/ca55/216" target=_blank>Visit SignInAndWIN.ca today to learn more!</A> <DIV> </DIV></BLOCKQUOTE> <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> You could win $1000 a day, now until May 12th, just for signing in to Windows Live Messenger. <A href="http://g.msn.ca/ca55/211" target=_blank>Check out SignInAndWIN.ca to learn more!</A></DIV> <DIV class=EC_MsoNormal style="TEXT-ALIGN: center" align=center> <HR align=center width="100%" SIZE=2> </DIV> Sign in to Windows Live Messenger, and enter for your chance to win $1000 a day—today until May 12th. <A href="http://g.msn.ca/ca55/210" target=_blank>Visit SignInAndWIN.ca</A></DIV></BLOCKQUOTE> <HR> Sign in today. When you sign in to Windows Live Messenger you could win $1000 a day until May 12th. <A href="http://g.msn.ca/ca55/209" target=_new>Learn more at SignInAndWIN.ca</A> </BLOCKQUOTE></BODY></HTML>