<div dir="ltr"><div><div><div><div><div><div><div><div><div><div><div><div><div><br></div>We have a Dell system which was initially set up on the cheap<br></div>using the on board SATA controller (S100).  It runs<br>software RAID with a mirror of two sata disks.  We found<br>
it was sufficient for operations, but a full backup service<br></div>takes about 16 hours to backup 200 GB so this isn't so good.<br><br></div>A Perc H700 controller was ordered, and it seems there is<br>no way to use it as a straight controller.  It can only use<br>
the hardware raid configuration.  I'd be happy to learn there<br>is a way to make it work as a straight through controller, so<br>please correct me if this is wrong.<br><br></div>Assuming the H700 will not support straight physical disk<br>
</div>access and software raid, how would we migrate it to the hardware<br>raid?<br><br></div>I know it is easy to convert one disk in the md raid to ext3<br></div>simply by setting it as sda1 etc in /etc/fstab.<br><br></div>
I don't know if it is possible to assemble a degraded mirror<br></div>in the H700 using just one disk.<br><br></div>Assuming the H700 could create a degraded array,<br>then from a live/rescue CD, while running from two<br>
controllers (onboard for one, H700 for other)<br>we could mount these things and cp -a the partitions.<br></div><br></div>Is there a better way?<br><br></div>