Increase your packet size...<br><br>One of our networking class projects a couple years ago was to benchmark gigibit ethernet transfer speeds.  <br><br>I benchmarked 700mb/s+ between two Linux PCs which was reasonable to our instructor.
<br><br>He emphasized that the brand/chipset of cards made a big difference ( it wasn't the most expensive that performed best ... ) as well as the drivers.<br><br>Some of his published tests as described below show that you can achieve at least 700mb/s even with 32bit Netgear GA622T cards as illustrated in a ps link from his website:
<br><br><a href="http://www.cs.uni.edu/~gray/">http://www.cs.uni.edu/~gray/</a><br><br>Benchmark project links:<br><a href="http://www.cs.uni.edu/~gray/gig-over-copper/">http://www.cs.uni.edu/~gray/gig-over-copper/</a><br>
<a href="http://www.cs.uni.edu/~gray/gig-over-copper/gig-over-copper.html">http://www.cs.uni.edu/~gray/gig-over-copper/gig-over-copper.html</a><br><br>PS file showing performance benchmarks ( note 700mb/s+ requires packet size of 100k+ bytes ):
<br><br><a href="http://www.cs.uni.edu/~gray/gig-over-copper/hsln-lcn.ps">http://www.cs.uni.edu/~gray/gig-over-copper/hsln-lcn.ps</a><br><br>Tim<br><br><div><span class="gmail_quote">On 8/21/06, <b class="gmail_sendername">
Corne Beerse</b> <<a href="mailto:cbeerse@gmail.com">cbeerse@gmail.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Dan Hunter wrote:<br><br>> I regularly move large files from a windows XP machine to a Fedora<br>> Core 5 machine.<br>> To avoid bothering other network users, I purchased two Linksys EG1032<br>> gigabit ether net cards.
<br>> The cards have been installed.  a direct PC to PC gigabit cross over<br>> cable connects them.<br>> A separate set of IP address have been set up.<br>> I can verify that data is being transfered over the gigabit cable with
<br>> windows task manager.<br>><br>> Transfers over the 10/100 link show up at 82 or 83 percent - about 80<br>> Mbps.<br>> Transfers over the gigabit link show up at 20 to 26 percent - about<br>> 230 Mbps.
<br>><br>> What do I have set up wrong?<br>><br>><br>Your expectations are to high. If you have about 20% utilisation with a<br>Gbit nic, I'd say you are doing verry nice.<br><br>With the move to gigabit networking, the nic is no longer the
<br>bottleneck. If you move data from disk on one machine or to disk on an<br>other, the disk-controllers, disk interfaces or even the actual disks<br>are most likely the bottlenecks. Then, the disk does not need to be the
<br>bottleneck. Think about the speed of internal busses and for which they<br>are used while you are dumping data...<br><br><br>CBee<br><br>_______________________________________________<br>rhn-users mailing list<br><a href="mailto:rhn-users@redhat.com">
rhn-users@redhat.com</a><br><a href="https://www.redhat.com/mailman/listinfo/rhn-users">https://www.redhat.com/mailman/listinfo/rhn-users</a><br></blockquote></div><br><br clear="all"><br>-- <br>Tim Schoenfelder<br><a href="http://timschoenfelder.com">
http://timschoenfelder.com</a>