<p dir="ltr">I'm still having ROM errors after checking all of those switches and removing the SLI cable? I also have occasional issues where when I try to suspend the computer just immediately wakes back up, failing to reset the card. I'm assuming something is holding the computer back from powering down. It's strange stuff, I might see if I can just use poweroff to reboot the card directly.</p>
<div class="gmail_quote">On Feb 23, 2016 4:37 PM, "vfio" <<a href="mailto:vfio@taintedbit.com">vfio@taintedbit.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Ah, interesting. I started by trying virtio 0.1.102 (stable), but this does not appear to support Windows 10 yet. When using virtio 0.1.112 (latest), I experienced the freezing issues. After that, I simply stopped using virtio and this allowed Windows to install. I did not benchmark performance, but I assume it is poor. Windows update froze at 24% even without using virtio, but it may be the case that I was simply too impatient.<br>
<br>
Back when I had two 580 cards, it worked fine as long as the SLI cable was removed and I only passed through the card that was in the physically "lower" slot on the board. I was never able to successfully pass through the card in the slot physically closest to the CPU. In other words, a card in slot 1 will never work, and a card in slot 2 will only work as long as there is a graphics card in slot 1. Another way to look at it is that the card attached to the monitor showing the host UEFI screen will never work with passthrough.<br>
<br>
That being said, it is possible that I am wrong about this: it could be the case that updates in the past year have resolved the issue, or that my problems back then were also caused by the PCI lane DIP switches.<br>
</blockquote></div>