<div dir="ltr"> Hello, I was able to make some progress on getting UPT mode to work but I think I might have hit a wall. I switched from Seabios to OVMF and now my Windows 10 guest boots up and is viewable through VNC. The Windows Display Settings show the second monitor and the Windows System Settings also show multiple displays: the first being a Microsoft Basic Display Adapter and the second being Intel HD Graphics 630. However, the Intel Graphics Control Panel software only sees one display (“Virtual Display”) and my external monitor is blank. I am seeing some DMAR errors in the log files which might be related? DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Read] Request device [00:02.0] fault addr 80000000 [fault reason 06] PTE Read access is not set DMAR: [DMA Read] Request device [00:02.0] fault addr 8003e000 [fault reason 12] non-zero reserved fields in PTE So I tried adding "iommu=pt" to my grub command line, but that did not fix the DMAR errors and the monitor is still blank. Does anyone have any suggestions for troubleshooting next steps? Has anyone been able to get IGD to work using UPT mode or am I just wasting my time? Thanks again, Ed <a name="_MailOriginal">From: </a><<a href="mailto:vfio-users-bounces@redhat.com">vfio-users-bounces@redhat.com</a>> on behalf of <<a href="mailto:edjamessmith3@gmail.com">edjamessmith3@gmail.com</a>> Date: Friday, October 20, 2017 at 10:05 AM To: "<a href="mailto:vfio-users@redhat.com">vfio-users@redhat.com</a>" <<a href="mailto:vfio-users@redhat.com">vfio-users@redhat.com</a>> Subject: [vfio-users] Troubleshooting UPT Mode Hello, I was wondering if anyone could help me troubleshoot getting UPT mode working for my Windows 10 guest. I was able to get Legacy Passthrough mode to work; however, when I try UPT mode, I receive the message "Guest has not initialized the display (yet)." in VNC and my external monitor is blank. My understanding is that with UPT, VNC should be my primary display and i should be able to configure my external display as a secondary which will mirror my primary. However, since my primary is not initializing, I am stuck. I am running a proxmox 5 server with the following configuration: kernel: 4.10.17-2-pve Qemu: pve-qemu-kvm_2.9.1-1 Seabios CPU: i3-7100 Kaby Lake KVM/QEMU command: /usr/bin/kvm -id 102 -chardev 'socket,id=qmp,path=/var/run/qemu-server/102.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -pidfile /var/run/qemu-server/102.pid -daemonize -smbios 'type=1,uuid=4940768b-9482-4f78-a7bc-af7bb7bc6e7d' -name Windows10 -smp '2,sockets=1,cores=2,maxcpus=2' -nodefaults -boot 'menu=on,strict=on,reboot-timeout=1000,splash=/usr/share/qemu-server/bootsplash.jpg' -vga std -vnc unix:/var/run/qemu-server/102.vnc,x509,password -no-hpet -cpu 'kvm64,+lahf_lm,+sep,+kvm_pv_unhalt,+kvm_pv_eoi,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,enforce' -m 2048 -k en-us -device 'vfio-pci,host=00:02.0,addr=0x18,x-vga=on,x-igd-opregion=on' -device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -readconfig /usr/share/qemu-server/pve-usb.cfg -device 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device 'usb-host,vendorid=0x046d,productid=0xc016,id=usb0' -device 'usb-host,vendorid=0x413c,productid=0x2006,id=usb1' -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi 'initiator-name=iqn.1993-08.org.debian:01:63c0b974b722' -drive 'file=/var/lib/vz/images/102/vm-102-disk-1.raw,if=none,id=drive-ide0,format=raw,cache=none,aio=native,detect-zeroes=on' -device 'ide-hd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0,bootindex=100' -drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -netdev 'type=tap,id=net0,ifname=tap102i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown' -device 'e1000,mac=02:66:F7:7C:78:68,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300' -rtc 'driftfix=slew,base=localtime' -global 'kvm-pit.lost_tick_policy=discard' I didn't see any obvious errors in my log files. I'd be happy to post the working Legacy configuration if that would help. Thanks in advance, Ed </div>