<div dir='auto'>Thanks for the response.<div dir="auto"><br></div><div dir="auto">This guy had success with a similar board and ESXi.</div><div dir="auto"><br></div><div dir="auto"><div dir="auto">https://www.reddit.com/r/Amd/comments/72ula0/tr1950x_gtx_1060_passthrough_with_esxi/<br></div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto">I also found an account of it working on the same board as mine (Zenith).  Note that my IOMMU groups were better than his, possibly due to a bios setting he's missed, im guessing:</div><div dir="auto"><br></div><div dir="auto">https://forum.level1techs.com/t/threadripper-gpu-passthrough-working-with-vega/120594<br></div><div dir="auto"><br></div><div dir="auto">This guy is using a similar board from Asrock and uses KVM:</div><div dir="auto"><br></div><div dir="auto">https://forum.level1techs.com/t/threadripper-gpu-passthrough-working-with-vega/120594<br></div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto">I didn't get much of a chance to look at the groupings, but I did notice that all three GPUs got their own IOMMU groups, and I was able to bind vfio-pci.  In addition I noticed I had many more groups than on my X58s or than the second post referened above.  It was close to 50.   Perhaps that was down to the "unique IOMMU per IVR (or so) setting in the bios.</div><div dir="auto"><br></div><div dir="auto">Asus tech suppoirt might think of something that I haven't, and could get a chance to test it tomorrow.  It's a great value. Especially for this application, so I'm still slightly minclined to keep it if I cab.</div><div dir="auto"><br></div><div dir="auto">-Brian</div></div></div>