Warning : Failed to set up UEFI / The Libvirt version does not support UEFI / Install options are limited...

Pavel Hrdina phrdina at redhat.com
Fri Aug 25 16:21:07 UTC 2023


On Fri, Aug 25, 2023 at 05:47:32PM +0200, Mario Marietto wrote:
> ---> If you do only build-dep for libvirt you will have no virt-manager and
> you would not be able to use it. You would have only libvirt.
> 
> I don't want to use libvirt without the graphic frontend. It makes no
> sense. At this point,if I can't use virt-manager,I would have used the qemu
> parameters directly.

Ok, I did not make myself clear in that case. The point is you still
need to install virt-manager using package manager or get it from
upstream.

`apt build-dep` install packages that are required to build that package
but will not install the package itself.

`apt install` will install that package with all dependencies to use
that package.

The main difference is `to build` and `to run` the package.

The issue with `apt install virt-manager` is that it will install also
libvirt and qemu using package manager but you will not uses these
installed libvirt and qemu as you are building your own.

You can still definitely use virt-manager even if you build libvirt and
qemu yourself, but you need to install it or get it some other way.

Pavel

> 
> 
> On Fri, Aug 25, 2023 at 3:50 PM Mario Marietto <marietto2008 at gmail.com>
> wrote:
> 
> > As normal user,instead,I don't see the previous errors,but virt-manager is
> > missing :
> >
> > marietto at chromarietto:~$ libvirtd &
> > [1] 1947
> >
> > marietto at chromarietto:~$ ps ax | grep libvirt
> >
> > 1947 pts/0    Sl     0:00 libvirtd
> > 1974 pts/0    S+     0:00 grep libvirt
> >
> > marietto at chromarietto:~$ virt-manager
> > -bash: virt-manager: command not found
> >
> > On Fri, Aug 25, 2023 at 3:35 PM Mario Marietto <marietto2008 at gmail.com>
> > wrote:
> >
> >> Finally we can understand well what's wrong :
> >>
> >> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# libvirtd &
> >>
> >> [1] 1784
> >>
> >> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# 2023-08-25
> >> 13:32:41.245+0000: 1801: info : libvirt version: 9.7.0
> >>
> >> 2023-08-25 13:32:41.245+0000: 1801: info : hostname: chromarietto
> >>
> >> 2023-08-25 13:32:41.245+0000: 1801: error :
> >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply firewall
> >> rules /usr/sbin/iptables -w --table mangle --list-rules: iptables v1.8.9
> >> (legacy): can't initialize iptables table `mangle': Table does not exist
> >> (do you need to insmod?)
> >> Perhaps iptables or your kernel needs to be upgraded.
> >>
> >> 2023-08-25 13:32:41.263+0000: 1801: error :
> >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply firewall
> >> rules /usr/sbin/ip6tables -w --table filter --list-rules: modprobe: FATAL:
> >> Module ip6_tables not found in directory /lib/modules/5.4.244-stb-cbe
> >> ip6tables v1.8.9 (legacy): can't initialize ip6tables table `filter':
> >> Table does not exist (do you need to insmod?). Perhaps ip6tables or your
> >> kernel needs to be upgraded.
> >>
> >> 2023-08-25 13:32:41.693+0000: 1801: error : virGetUserID:760 : invalid
> >> argument: Failed to parse user 'libvirt-qemu'
> >> 2023-08-25 13:32:41.699+0000: 1801: error : virStateInitialize:672 :
> >> Initialization of QEMU state driver failed: invalid argument: Failed to
> >> parse user 'libvirt-qemu'
> >> 2023-08-25 13:32:41.699+0000: 1801: error : daemonRunStateInit:617 :
> >> Driver state initialization failed
> >>
> >> On Fri, Aug 25, 2023 at 2:51 PM Mario Marietto <marietto2008 at gmail.com>
> >> wrote:
> >>
> >>> it does not care,I solve it following this small tutorial :
> >>>
> >>> https://www.cnblogs.com/dream397/p/13850629.html
> >>>
> >>> thanks anyway. You are very gentle with me.
> >>>
> >>> On Fri, Aug 25, 2023 at 2:39 PM Mario Marietto <marietto2008 at gmail.com>
> >>> wrote:
> >>>
> >>>> On Debian bookworm I get a compilation error,but not on Devuan :
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# ./configure
> >>>> --disable-werror --target-list=arm-softmmu --enable-opengl --enable-gtk
> >>>> --enable-kvm --enable-guest-agent --enable-spice --audio-drv-list="oss pa"
> >>>> --enable-libusb --enable-trace-backend=simple --enable-debug
> >>>> --prefix=/usr/local
> >>>>
> >>>> Install prefix    /usr/local
> >>>> BIOS directory    /usr/local/share/qemu
> >>>> firmware path     /usr/local/share/qemu-firmware
> >>>> binary directory  /usr/local/bin
> >>>> library directory /usr/local/lib
> >>>> module directory  /usr/local/lib/qemu
> >>>> libexec directory /usr/local/libexec
> >>>> include directory /usr/local/include
> >>>> config directory  /usr/local/etc
> >>>> local state directory   /usr/local/var
> >>>> Manual directory  /usr/local/share/man
> >>>> ELF interp prefix /usr/gnemul/qemu-%M
> >>>> Build directory   /home/marietto/Desktop/Dati/qemu-v5.1.0
> >>>> Source path       /home/marietto/Desktop/Dati/qemu-v5.1.0
> >>>> GIT binary        git
> >>>> GIT submodules    ui/keycodemapdb tests/fp/berkeley-testfloat-3
> >>>> tests/fp/berkeley-softfloat-3 dtc capstone slirp
> >>>> C compiler        cc
> >>>> Host C compiler   cc
> >>>> C++ compiler      c++
> >>>> Objective-C compiler cc
> >>>> ARFLAGS           rv
> >>>> CFLAGS            -g
> >>>> QEMU_CFLAGS       -I/usr/include/pixman-1  -I$(SRC_PATH)/dtc/libfdt
> >>>>  -pthread -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/gl
> >>>> ib-2.0/include  -fPIE -DPIE  -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
> >>>> -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wund
> >>>> ef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing
> >>>> -fno-common -fwrapv -std=gnu99  -Wold-style-declaration -Wold-style-defini
> >>>> tion -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
> >>>> -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpan
> >>>> sion-to-defined -Wno-missing-include-dirs -Wno-shift-negative-value
> >>>> -Wno-psabi -fstack-protector-strong   -I/usr/include/p11-kit-1   -D
> >>>> STRUCT_IOVEC_DEFINED  -I/usr/include/libpng16   -I/usr/include/spice-1
> >>>> -I/usr/include/spice-server  -I$(SRC_PATH)/capstone/include
> >>>> QEMU_LDFLAGS      -L$(BUILD_DIR)/dtc/libfdt -Wl,--warn-common
> >>>> -Wl,-z,relro -Wl,-z,now -pie  -fstack-protector-strong
> >>>> make              make
> >>>> install           install
> >>>> python            /usr/bin/python3 -B (3.11.2)
> >>>> genisoimage
> >>>> efi_aarch64
> >>>>       /home/marietto/Desktop/Dati/qemu-v5.1.0/pc-bios/edk2-aarch64-code.fd
> >>>> python_yaml       no
> >>>> slirp support     git
> >>>> smbd              /usr/sbin/smbd
> >>>> module support    no
> >>>> alt path mod load no
> >>>> host CPU          arm
> >>>> host big endian   no
> >>>> target list       arm-softmmu
> >>>> gprof enabled     no
> >>>> sparse enabled    no
> >>>> strip binaries    no
> >>>> profiler          no
> >>>> static build      no
> >>>> safe stack        no
> >>>> SDL support       no
> >>>> SDL image support no
> >>>> GTK support       yes (3.24.37)
> >>>> GTK GL support    yes
> >>>> VTE support       no
> >>>> TLS priority      NORMAL
> >>>> GNUTLS support    yes
> >>>> libgcrypt         no
> >>>> nettle            yes (3.8.1)
> >>>>  XTS             yes
> >>>> libtasn1          yes
> >>>> PAM               no
> >>>> iconv support     yes
> >>>> curses support    yes
> >>>> virgl support     no
> >>>> curl support      yes
> >>>> mingw32 support   no
> >>>> Audio drivers     oss pa
> >>>> Block whitelist (rw)
> >>>> Block whitelist (ro)
> >>>> VirtFS support    yes
> >>>> Multipath support no
> >>>> VNC support       yes
> >>>> VNC SASL support  yes
> >>>> VNC JPEG support  yes
> >>>> VNC PNG support   yes
> >>>> xen support       yes
> >>>> xen ctrl version  41700
> >>>> brlapi support    no
> >>>> Documentation     no
> >>>> PIE               yes
> >>>> vde support       no
> >>>> netmap support    no
> >>>> Linux AIO support no
> >>>> Linux io_uring support no
> >>>> ATTR/XATTR support yes
> >>>> Install blobs     yes
> >>>> KVM support       yes
> >>>> HAX support       no
> >>>> HVF support       no
> >>>> WHPX support      no
> >>>> TCG support       yes
> >>>> TCG debug enabled yes
> >>>> TCG interpreter   no
> >>>> malloc trim support yes
> >>>> RDMA support      no
> >>>> PVRDMA support    no
> >>>> fdt support       git
> >>>> membarrier        no
> >>>> preadv support    yes
> >>>> fdatasync         yes
> >>>> madvise           yes
> >>>> posix_madvise     yes
> >>>> posix_memalign    yes
> >>>> libcap-ng support yes
> >>>> vhost-net support yes
> >>>> vhost-crypto support yes
> >>>> vhost-scsi support yes
> >>>> vhost-vsock support yes
> >>>> vhost-user support yes
> >>>> vhost-user-fs support yes
> >>>> vhost-vdpa support yes
> >>>> Trace backends    simple
> >>>> Trace output file trace-<pid>
> >>>> spice support     yes (0.14.3/0.15.1)
> >>>> rbd support       yes
> >>>> xfsctl support    no
> >>>> smartcard support no
> >>>> libusb            yes
> >>>> usb net redir     no
> >>>> OpenGL support    yes
> >>>> OpenGL dmabufs    yes
> >>>> libiscsi support  yes
> >>>> libnfs support    no
> >>>> build guest agent yes
> >>>> QGA VSS support   no
> >>>> QGA w32 disk info no
> >>>> QGA MSI support   no
> >>>> seccomp support   no
> >>>> coroutine backend ucontext
> >>>> coroutine pool    yes
> >>>> debug stack usage no
> >>>> mutex debugging   yes
> >>>> crypto afalg      no
> >>>> GlusterFS support yes
> >>>> gcov              gcov
> >>>> gcov enabled      no
> >>>> TPM support       yes
> >>>> libssh support    yes
> >>>> QOM debugging     yes
> >>>> Live block migration yes
> >>>> lzo support       no
> >>>> snappy support    no
> >>>> bzip2 support     no
> >>>> lzfse support     no
> >>>> zstd support      yes
> >>>> NUMA host support yes
> >>>> libxml2           yes
> >>>> tcmalloc support  no
> >>>> jemalloc support  no
> >>>> avx2 optimization
> >>>> avx512f optimization no
> >>>> replication support yes
> >>>> bochs support     yes
> >>>> cloop support     yes
> >>>> dmg support       yes
> >>>> qcow v1 support   yes
> >>>> vdi support       yes
> >>>> vvfat support     yes
> >>>> qed support       yes
> >>>> parallels support yes
> >>>> sheepdog support  yes
> >>>> capstone          git
> >>>> libpmem support   no
> >>>> libdaxctl support no
> >>>> libudev           yes
> >>>> default devices   yes
> >>>> plugin support    no
> >>>> fuzzing support   no
> >>>> gdb
> >>>> rng-none          no
> >>>> Linux keyring     yes
> >>>> cross containers  no
> >>>>
> >>>> NOTE: guest cross-compilers enabled: cc
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# apt install
> >>>> libfdt-dev libdt-utils-dev python3-libfdt
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# make
> >>>>
> >>>>  GEN     arm-softmmu/config-devices.mak.tmp
> >>>>  GEN     arm-softmmu/config-devices.mak
> >>>>  GEN     config-all-devices.mak
> >>>>  GEN     config-host.h
> >>>> make[1]: Entering directory
> >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp'
> >>>> make[1]: Nothing to be done for 'all'.
> >>>> make[1]: Leaving directory
> >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp'
> >>>> make[1]: *** No rule to make target
> >>>> '/root/Desktop/qemu-v5.1.0/dtc/libfdt/fdt.h', needed by 'libfdt/fdt.o'.
> >>>> Stop.
> >>>> make: *** [Makefile:536: dtc/all] Error 2
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# cd dtc
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc# cd
> >>>> libfdt
> >>>>
> >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc/libfdt#
> >>>> ls
> >>>>
> >>>> fdt_addresses.c  fdt_check.d       fdt_empty_tree.o  fdt_overlay.o
> >>>>  fdt_rw.d        fdt_sw.c   fdt_wip.o          Makefile.libfdt
> >>>> fdt_addresses.d  fdt_check.o       fdt.h             fdt_ro.c
> >>>>       fdt_rw.o        fdt_sw.d   libfdt.a           TODO
> >>>> fdt_addresses.o  fdt.d             fdt.o             fdt_ro.d
> >>>>       fdt_strerror.c  fdt_sw.o   libfdt_env.h       version.lds
> >>>> fdt.c            fdt_empty_tree.c  fdt_overlay.c     fdt_ro.o
> >>>>       fdt_strerror.d  fdt_wip.c  libfdt.h
> >>>> fdt_check.c      fdt_empty_tree.d  fdt_overlay.d     fdt_rw.c
> >>>>       fdt_strerror.o  fdt_wip.d  libfdt_internal.h
> >>>>
> >>>>
> >>>>
> >>>> On Fri, Aug 25, 2023 at 10:51 AM Pavel Hrdina <phrdina at redhat.com>
> >>>> wrote:
> >>>>
> >>>>> On Thu, Aug 24, 2023 at 10:40:40PM +0200, Mario Marietto wrote:
> >>>>> > I've installed Debian bookworm instead of devuan. Maybe it's
> >>>>> easier,since I
> >>>>> > know debian better than devuan. Let me understand a point : should I
> >>>>> issue
> >>>>> > "apt build-dep libvirt" instead of "apt install virt-manager" ?
> >>>>> aren't they
> >>>>> > equivalent commands ? Usually,as soon as I reinstall Debian,I do the
> >>>>> > installation of virt-manager and it grabs all its dependencies. If I
> >>>>> > understand correctly,I should not install virt-manager and its
> >>>>> > dependencies,right ? thanks.
> >>>>>
> >>>>> If you run `apt install virt-manager` it will install virt-manager,
> >>>>> libvirt, qemu and everything needed to run and use the software.
> >>>>> If you run `apt build-dep libvirt` it will install everything needed to
> >>>>> compile libvirt but not necessarily everything you need to actually run
> >>>>> it. If you do only build-dep for libvirt you will have no virt-manager
> >>>>> and you would not be able to use it. You would have only libvirt.
> >>>>>
> >>>>> > On Thu, Aug 24, 2023 at 3:16 PM Pavel Hrdina <phrdina at redhat.com>
> >>>>> wrote:
> >>>>> >
> >>>>> > > On Wed, Aug 23, 2023 at 08:47:55PM +0200, Mario Marietto wrote:
> >>>>> > > > I've fixed this problem :
> >>>>> > > >
> >>>>> > > > virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version
> >>>>> > > > `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh)
> >>>>> > > >
> >>>>> > > > now,virsh works if I launch it within the build directory of
> >>>>> libvirt :
> >>>>> > > >
> >>>>> > > > root at devuan:~/libvirt_build/bin# ./virsh
> >>>>> > > > Welcome to virsh, the virtualization interactive terminal.
> >>>>> > > >
> >>>>> > > > Type:  'help' for help with commands
> >>>>> > > >       'quit' to quit
> >>>>> > > >
> >>>>> > > > but inside the build directory of libvirt I don't see any
> >>>>> virt-manager
> >>>>> > > > executable,so I'm forced to run it like this :
> >>>>> > > >
> >>>>> > > > root at devuan:~/Desktop/libvirt/build# ./run /usr/bin/virt-manager
> >>>>> > > >
> >>>>> > > > and it gives the previous error : no connection driver available
> >>>>> for
> >>>>> > > > qemu:///system
> >>>>> > > >
> >>>>> > > > but the fact that virsh works is a progress ? should I compile
> >>>>> > > virt-manager
> >>>>> > > > also from source code ?
> >>>>> > >
> >>>>> > > No, there is no need to compile virt-manager, it is written in
> >>>>> python
> >>>>> > > and so there is no compilation involved at all.
> >>>>> > >
> >>>>> > >
> >>>>> > > I would probably recommend you to remove `~/libvirt_build/` and
> >>>>> > > `~/Desktop/libvirt/build/` directories and start again.
> >>>>> > >
> >>>>> > > If you've successfully installed all libvirt build dependencies
> >>>>> using
> >>>>> > > `apt build-dep libvirt` you should have everything to build your
> >>>>> own
> >>>>> > > libvirt if you are on Devuan 5.
> >>>>> > >
> >>>>> > > The next step would be configuring libvirt so you can compile it
> >>>>> using
> >>>>> > > the following command executed in the libvirt source directory:
> >>>>> > >
> >>>>> > >     meson setup build
> >>>>> > >
> >>>>> > > Once that is completed you can build and install your libvirt using
> >>>>> > > the following command directly from the source directory as well:
> >>>>> > >
> >>>>> > >     ninja -C build
> >>>>> > >     sudo ninja -C build install
> >>>>> > >
> >>>>> > > The first one will build libvirt (I would not run it as root) and
> >>>>> the
> >>>>> > > second one will install it into /usr/local/.
> >>>>> > >
> >>>>> > > After that is done you should be able to run virsh and libvirtd
> >>>>> directly
> >>>>> > > without any run script. You can verify which binary is actually
> >>>>> used if
> >>>>> > > you run the following:
> >>>>> > >
> >>>>> > >     which virsh
> >>>>> > >     which libvirtd
> >>>>> > >
> >>>>> > > If everything is correct you should get these paths:
> >>>>> > >
> >>>>> > >     /usr/local/bin/virsh
> >>>>> > >     /usr/local/sbin/libvirtd
> >>>>> > >
> >>>>> > > Now you should be able to simply run `libvirtd &` to start the
> >>>>> daemon.
> >>>>> > >
> >>>>> > > After that running `virsh version` or any virsh command should just
> >>>>> > > work. Running `virt-manager` should also work and connect to the
> >>>>> correct
> >>>>> > > libvirt.
> >>>>> > >
> >>>>> > >
> >>>>> > > I also tried installing QEMU build dependencies using `apt
> >>>>> build-dep qemu`
> >>>>> > > and used the following steps to build QEMU 5.1.0 from source
> >>>>> directory:
> >>>>> > >
> >>>>> > >     mkdir build
> >>>>> > >     cd build
> >>>>> > >     ../configure (with options, I'm doing it on x86_64 so they are
> >>>>> bit
> >>>>> > > different)
> >>>>> > >     make
> >>>>> > >     sudo make install
> >>>>> > >
> >>>>> > > But you should have theses steps completed already. Again you can
> >>>>> verify
> >>>>> > > that you are using correct qemu-system-arm running:
> >>>>> > >
> >>>>> > >     which qemu-system-arm
> >>>>> > >
> >>>>> > > where you should get
> >>>>> > >
> >>>>> > >     /usr/local/bin/qemu-system-arm
> >>>>> > >
> >>>>> > > If you complete all of the build and install steps like here and
> >>>>> start
> >>>>> > > libvirtd after that you should have everything set to work properly
> >>>>> > > and starting `virt-manager` without any special path should just
> >>>>> work.
> >>>>> > >
> >>>>> > > I verified all of this on Devuan 5 but on x86_64 architecture,
> >>>>> don't
> >>>>> > > have any 32bit arm to try it on.
> >>>>> > >
> >>>>> > > Pavel
> >>>>> > >
> >>>>> > >
> >>>>> > > > On Wed, Aug 23, 2023 at 7:39 PM Mario Marietto <
> >>>>> marietto2008 at gmail.com>
> >>>>> > > > wrote:
> >>>>> > > >
> >>>>> > > > > Despite that error,the previous error is still there :
> >>>>> > > > >
> >>>>> > > > > Unable to connect to libvirt qemu:///system.
> >>>>> > > > >
> >>>>> > > > > no connection driver available for qemu:///system
> >>>>> > > > >
> >>>>> > > > > Libvirt URI is: qemu:///system
> >>>>> > > > >
> >>>>> > > > > Traceback (most recent call last):
> >>>>> > > > >   File "/usr/share/virt-manager/virtManager/connection.py",
> >>>>> line 923,
> >>>>> > > in
> >>>>> > > > > _do_open
> >>>>> > > > >     self._backend.open(cb, data)
> >>>>> > > > >   File "/usr/share/virt-manager/virtinst/connection.py", line
> >>>>> 171, in
> >>>>> > > open
> >>>>> > > > >     conn = libvirt.openAuth(self._open_uri,
> >>>>> > > > >            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>>> > > > >   File "/usr/lib/python3/dist-packages/libvirt.py", line 147,
> >>>>> in
> >>>>> > > openAuth
> >>>>> > > > >     raise libvirtError('virConnectOpenAuth() failed')
> >>>>> > > > > libvirt.libvirtError: no connection driver available for
> >>>>> qemu:///system
> >>>>> > > > >
> >>>>> > > > > I'm using qemu 5.1 :
> >>>>> > > > >
> >>>>> > > > > root at devuan:~# qemu-system-arm --version
> >>>>> > > > >
> >>>>> > > > > QEMU emulator version 5.1.0 (v5.1.0-dirty)
> >>>>> > > > >
> >>>>> > > > >
> >>>>> > > > > On Wed, Aug 23, 2023 at 7:30 PM Mario Marietto <
> >>>>> marietto2008 at gmail.com
> >>>>> > > >
> >>>>> > > > > wrote:
> >>>>> > > > >
> >>>>> > > > >> root at devuan:~/Desktop/libvirt/build# sudo virsh list --all
> >>>>> > > > >>
> >>>>> > > > >> virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version
> >>>>> > > > >> `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh)
> >>>>> > > > >>
> >>>>> > > > >>
> >>>>> > > > >>
> >>>>> > > > >> On Wed, Aug 23, 2023 at 5:43 PM Pavel Hrdina <
> >>>>> phrdina at redhat.com>
> >>>>> > > wrote:
> >>>>> > > > >>
> >>>>> > > > >>> On Wed, Aug 23, 2023 at 03:41:42PM +0200, Mario Marietto
> >>>>> wrote:
> >>>>> > > > >>> > Hello Pavel,
> >>>>> > > > >>> >
> >>>>> > > > >>> > It didn't work,but the error was changed. Isn't a bad news
> >>>>> :
> >>>>> > > > >>> >
> >>>>> > > > >>> > root at devuan:~/Desktop/libvirt/build# ./run
> >>>>> /usr/bin/virt-manager
> >>>>> > > > >>> >
> >>>>> > > > >>> > Unable to connect to libvirt qemu:///system.
> >>>>> > > > >>> >
> >>>>> > > > >>> > no connection driver available for qemu:///system
> >>>>> > > > >>> >
> >>>>> > > > >>> > Libvirt URI is: qemu:///system
> >>>>> > > > >>> >
> >>>>> > > > >>> > Traceback (most recent call last):
> >>>>> > > > >>> >   File
> >>>>> "/usr/share/virt-manager/virtManager/connection.py", line
> >>>>> > > 923,
> >>>>> > > > >>> in
> >>>>> > > > >>> > _do_open
> >>>>> > > > >>> >     self._backend.open(cb, data)
> >>>>> > > > >>> >   File "/usr/share/virt-manager/virtinst/connection.py",
> >>>>> line 171,
> >>>>> > > in
> >>>>> > > > >>> open
> >>>>> > > > >>> >     conn = libvirt.openAuth(self._open_uri,
> >>>>> > > > >>> >            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >>>>> > > > >>> >   File "/usr/lib/python3/dist-packages/libvirt.py", line
> >>>>> 147, in
> >>>>> > > > >>> openAuth
> >>>>> > > > >>> >     raise libvirtError('virConnectOpenAuth() failed')
> >>>>> > > > >>> > libvirt.libvirtError: no connection driver available for
> >>>>> > > qemu:///system
> >>>>> > > > >>>
> >>>>> > > > >>> Seems like you've compiled libvirt without qemu support. My
> >>>>> guess is
> >>>>> > > > >>> that you are missing dependencies to compile libvirt with
> >>>>> QEMU
> >>>>> > > driver.
> >>>>> > > > >>> If you run
> >>>>> > > > >>>
> >>>>> > > > >>>     apt build-dep libvirt
> >>>>> > > > >>>
> >>>>> > > > >>> it should install you dependencies that libvirt from package
> >>>>> manager
> >>>>> > > > >>> would need and that is a good starting point to compile your
> >>>>> own
> >>>>> > > > >>> libvirt.
> >>>>> > > > >>>
> >>>>> > > > >>>
> >>>>> > > > >>> > On Wed, Aug 23, 2023 at 2:27 PM Pavel Hrdina <
> >>>>> phrdina at redhat.com>
> >>>>> > > > >>> wrote:
> >>>>> > > > >>> >
> >>>>> > > > >>> > > On Tue, Aug 22, 2023 at 10:23:32PM +0200, Mario Marietto
> >>>>> wrote:
> >>>>> > > > >>> > > > After having compiled libvirt from src and having run
> >>>>> > > > >>> virt-manager,I get
> >>>>> > > > >>> > > > the error "Libvirtd daemon is not running". Can you
> >>>>> give a
> >>>>> > > look at
> >>>>> > > > >>> this
> >>>>> > > > >>> > > > picture ?
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > > https://ibb.co/n6MvDbL
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > > how to fix it ? thanks.
> >>>>> > > > >>> > >
> >>>>> > > > >>> > > If you managed to start libvirtd using the run script
> >>>>> from
> >>>>> > > libvirt
> >>>>> > > > >>> build
> >>>>> > > > >>> > > directory you should use the run script to start
> >>>>> virt-manager as
> >>>>> > > > >>> well.
> >>>>> > > > >>> > >
> >>>>> > > > >>> > > > On Tue, Aug 22, 2023 at 10:17 PM Mario Marietto <
> >>>>> > > > >>> marietto2008 at gmail.com>
> >>>>> > > > >>> > > > wrote:
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > > > [image: Screenshot from 2023-08-22 22-06-30.png]
> >>>>> > > > >>> > > > >
> >>>>> > > > >>> > > > > On Tue, Aug 22, 2023 at 9:44 PM Mario Marietto <
> >>>>> > > > >>> marietto2008 at gmail.com
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > > > wrote:
> >>>>> > > > >>> > > > >
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> Hello,
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> Pavel,are you there ? Please help me to give it the
> >>>>> last
> >>>>> > > push.
> >>>>> > > > >>> I've
> >>>>> > > > >>> > > fixed
> >>>>> > > > >>> > > > >> the last error like so :
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> root at devuan:~/Desktop/libvirt/build#
> >>>>> update-alternatives
> >>>>> > > --set
> >>>>> > > > >>> > > iptables
> >>>>> > > > >>> > > > >> /usr/sbin/iptables-legacy
> >>>>> > > > >>> > > > >> update-alternatives: using
> >>>>> /usr/sbin/iptables-legacy to
> >>>>> > > provide
> >>>>> > > > >>> > > > >> /usr/sbin/iptables (iptables) in manual mode
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> but now I have got another error. Anyway,I feel to
> >>>>> be close
> >>>>> > > :
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> root at devuan:~/Desktop/libvirt/build# sudo ./run
> >>>>> > > src/virtlockd
> >>>>> > > > >>> & sudo
> >>>>> > > > >>> > > > >> ./run src/virtlogd & sudo ./run src/libvirtd
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> 2023-08-22 19:38:49.036+0000: 15002: info : libvirt
> >>>>> version:
> >>>>> > > > >>> 9.7.0
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> hostname: devuan
> >>>>> > > > >>> > > > >> error : virPidFileAcquirePathFull:409 : Failed to
> >>>>> acquire
> >>>>> > > pid
> >>>>> > > > >>> file
> >>>>> > > > >>> > > > >> '/root/libvirt_build/var/run/virtlockd.pid':
> >>>>> Resource
> >>>>> > > > >>> temporarily
> >>>>> > > > >>> > > > >> unavailable
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> On Tue, Aug 22, 2023 at 7:01 PM Mario Marietto <
> >>>>> > > > >>> > > marietto2008 at gmail.com>
> >>>>> > > > >>> > > > >> wrote:
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >>> Et voila'. I've recompiled libvirt in this way :
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> git clone https://github.com/libvirt/libvirt.git
> >>>>> > > > >>> > > > >>> mkdir -p libvirt_build
> >>>>> > > > >>> > > > >>> cd libvirt
> >>>>> > > > >>> > > > >>> apt install meson xsltproc libgnutls28-dev
> >>>>> libxml2-dev
> >>>>> > > rst2pdf
> >>>>> > > > >>> > > > >>> meson build --prefix=$HOME/libvirt_build
> >>>>> > > > >>> > > > >>> ninja -C build
> >>>>> > > > >>> > > > >>> sudo ninja -C build install
> >>>>> > > > >>> > > > >>> cd build
> >>>>> > > > >>> > > > >>> nano vai.sh :
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> sudo ./run src/virtlockd & sudo ./run src/virtlogd
> >>>>> & sudo
> >>>>> > > ./run
> >>>>> > > > >>> > > > >>> src/libvirtd
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> chmod +x vai.sh
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> this is the error I get :
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> root at devuan:~/Desktop/libvirt/build# ./vai.sh
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info : libvirt
> >>>>> > > version:
> >>>>> > > > >>> 9.7.0
> >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info :
> >>>>> hostname:
> >>>>> > > devuan
> >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: error :
> >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal error:
> >>>>> Failed to
> >>>>> > > > >>> apply
> >>>>> > > > >>> > > > >>> firewall rules /usr/sbin/iptables -w --table filter
> >>>>> > > > >>> --list-rules:
> >>>>> > > > >>> > > > >>> iptables: Failed to initialize nft: Protocol not
> >>>>> supported
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.428+0000: 14725: error :
> >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal error:
> >>>>> Failed to
> >>>>> > > > >>> apply
> >>>>> > > > >>> > > firewall
> >>>>> > > > >>> > > > >>> rules /usr/sbin/ip6tables -w --table filter
> >>>>> --list-rules:
> >>>>> > > > >>> ip6tables:
> >>>>> > > > >>> > > Failed
> >>>>> > > > >>> > > > >>> to initialize nft: Protocol not supported
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> On Tue, Aug 22, 2023 at 6:49 PM Pavel Hrdina <
> >>>>> > > > >>> phrdina at redhat.com>
> >>>>> > > > >>> > > wrote:
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>>> On Tue, Aug 22, 2023 at 06:22:25PM +0200, Mario
> >>>>> Marietto
> >>>>> > > > >>> wrote:
> >>>>> > > > >>> > > > >>>> > In your opinion should I remove virt-manager
> >>>>> and all its
> >>>>> > > > >>> > > dependencies
> >>>>> > > > >>> > > > >>>> > before launching the recompilation ?
> >>>>> > > > >>> > > > >>>>
> >>>>> > > > >>> > > > >>>> I would say there is no need to do that if you
> >>>>> install
> >>>>> > > > >>> libvirt to
> >>>>> > > > >>> > > > >>>> /usr/local as it should be separated from the
> >>>>> libvirt
> >>>>> > > > >>> installed by
> >>>>> > > > >>> > > > >>>> package manager.
> >>>>> > > > >>> > > > >>>>
> >>>>> > > > >>> > > > >>>> Pavel
> >>>>> > > > >>> > > > >>>>
> >>>>> > > > >>> > > > >>>> >
> >>>>> > > > >>> > > > >>>> > On Tue, Aug 22, 2023 at 6:05 PM Pavel Hrdina <
> >>>>> > > > >>> phrdina at redhat.com>
> >>>>> > > > >>> > > > >>>> wrote:
> >>>>> > > > >>> > > > >>>> >
> >>>>> > > > >>> > > > >>>> > > On Tue, Aug 22, 2023 at 05:55:30PM +0200,
> >>>>> Mario
> >>>>> > > Marietto
> >>>>> > > > >>> wrote:
> >>>>> > > > >>> > > > >>>> > > > I have installed virt-manager and all its
> >>>>> > > dependencies
> >>>>> > > > >>> > > grabbing
> >>>>> > > > >>> > > > >>>> the files
> >>>>> > > > >>> > > > >>>> > > > from the devuan 5 repository.
> >>>>> > > > >>> > > > >>>> > > > To recompile libvirt I need to acquire some
> >>>>> basic
> >>>>> > > > >>> information.
> >>>>> > > > >>> > > > >>>> Which
> >>>>> > > > >>> > > > >>>> > > > version should I compile ? Where is the
> >>>>> source code
> >>>>> > > > >>> located ?
> >>>>> > > > >>> > > Do
> >>>>> > > > >>> > > > >>>> you have
> >>>>> > > > >>> > > > >>>> > > > some tutorial that explains the necessary
> >>>>> steps to
> >>>>> > > do
> >>>>> > > > >>> it ?
> >>>>> > > > >>> > > thanks.
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > > > >>>> > > Everything can be found at
> >>>>> https://libvirt.org/ not
> >>>>> > > sure
> >>>>> > > > >>> which
> >>>>> > > > >>> > > > >>>> version
> >>>>> > > > >>> > > > >>>> > > to pick, you can try latest upstream version
> >>>>> but there
> >>>>> > > > >>> might be
> >>>>> > > > >>> > > some
> >>>>> > > > >>> > > > >>>> > > dependencies missing in Devuan, if that
> >>>>> happens you
> >>>>> > > can
> >>>>> > > > >>> > > fallback to
> >>>>> > > > >>> > > > >>>> > > version that is provided by Devuan.
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > > > >>>> > > For example this link has basic info on how
> >>>>> to compile
> >>>>> > > > >>> libvirt
> >>>>> > > > >>> > > > >>>> > > https://libvirt.org/compiling.html and here
> >>>>> you can
> >>>>> > > find
> >>>>> > > > >>> > > sources
> >>>>> > > > >>> > > > >>>> > > to libvirt https://libvirt.org/downloads.html
> >>>>> .
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > > > >>>> > > Pavel
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > > > >>>> > > > On Tue, Aug 22, 2023 at 5:50 PM Pavel
> >>>>> Hrdina <
> >>>>> > > > >>> > > phrdina at redhat.com>
> >>>>> > > > >>> > > > >>>> wrote:
> >>>>> > > > >>> > > > >>>> > > >
> >>>>> > > > >>> > > > >>>> > > > > On Tue, Aug 22, 2023 at 05:28:50PM +0200,
> >>>>> Mario
> >>>>> > > > >>> Marietto
> >>>>> > > > >>> > > wrote:
> >>>>> > > > >>> > > > >>>> > > > > > root at devuan:~# virsh domcapabilities
> >>>>> --machine
> >>>>> > > virt
> >>>>> > > > >>> > > > >>>> --emulatorbin
> >>>>> > > > >>> > > > >>>> > > > > > /usr/bin/qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > error: failed to get emulator
> >>>>> capabilities
> >>>>> > > > >>> > > > >>>> > > > > > error: KVM is not supported on this
> >>>>> platform:
> >>>>> > > > >>> Function not
> >>>>> > > > >>> > > > >>>> > > implemented
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > BUT it's not true :
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > root at devuan:~# kvm-ok
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > INFO: /dev/kvm exists
> >>>>> > > > >>> > > > >>>> > > > > > KVM acceleration can be used
> >>>>> > > > >>> > > > >>>> > > > >
> >>>>> > > > >>> > > > >>>> > > > > Are you using libvirt installed using
> >>>>> package
> >>>>> > > manager
> >>>>> > > > >>> or
> >>>>> > > > >>> > > some
> >>>>> > > > >>> > > > >>>> libvirt
> >>>>> > > > >>> > > > >>>> > > > > that you compiled yorself? Checking
> >>>>> libvirt code
> >>>>> > > this
> >>>>> > > > >>> error
> >>>>> > > > >>> > > only
> >>>>> > > > >>> > > > >>>> > > happens
> >>>>> > > > >>> > > > >>>> > > > > if libvirt was compiled without KVM, more
> >>>>> > > > >>> specifically if
> >>>>> > > > >>> > > header
> >>>>> > > > >>> > > > >>>> > > > > `/usr/include/linux/kvm.h` doesn't exists.
> >>>>> > > > >>> > > > >>>> > > > >
> >>>>> > > > >>> > > > >>>> > > > > I was not able to find any details on
> >>>>> Devuan
> >>>>> > > distro
> >>>>> > > > >>> so not
> >>>>> > > > >>> > > sure
> >>>>> > > > >>> > > > >>>> how
> >>>>> > > > >>> > > > >>>> > > > > the libvirt package is compiled. You
> >>>>> might need
> >>>>> > > to try
> >>>>> > > > >>> > > compiling
> >>>>> > > > >>> > > > >>>> > > libvirt
> >>>>> > > > >>> > > > >>>> > > > > yourself.
> >>>>> > > > >>> > > > >>>> > > > >
> >>>>> > > > >>> > > > >>>> > > > > Pavel
> >>>>> > > > >>> > > > >>>> > > > >
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > On Tue, Aug 22, 2023 at 5:27 PM Mario
> >>>>> Marietto <
> >>>>> > > > >>> > > > >>>> > > marietto2008 at gmail.com>
> >>>>> > > > >>> > > > >>>> > > > > > wrote:
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > > Oh sorry....
> >>>>> > > > >>> > > > >>>> > > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > > On Tue, Aug 22, 2023 at 5:26 PM Mario
> >>>>> > > Marietto <
> >>>>> > > > >>> > > > >>>> > > marietto2008 at gmail.com
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > > wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > >> virsh domcapabilities --machine virt
> >>>>> > > > >>> --emulatorbin
> >>>>> > > > >>> > > > >>>> > > > > > >> /path/to/qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >> error: failed to get emulator
> >>>>> capabilities
> >>>>> > > > >>> > > > >>>> > > > > > >> error: Cannot check QEMU binary
> >>>>> > > > >>> > > /path/to/qemu-system-arm:
> >>>>> > > > >>> > > > >>>> No such
> >>>>> > > > >>> > > > >>>> > > > > file or
> >>>>> > > > >>> > > > >>>> > > > > > >> directory
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >> On Tue, Aug 22, 2023 at 4:49 PM
> >>>>> Pavel Hrdina
> >>>>> > > <
> >>>>> > > > >>> > > > >>>> phrdina at redhat.com>
> >>>>> > > > >>> > > > >>>> > > > > wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> On Tue, Aug 22, 2023 at 04:05:09PM
> >>>>> +0200,
> >>>>> > > Mario
> >>>>> > > > >>> > > Marietto
> >>>>> > > > >>> > > > >>>> wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >>> > Where does libvirt want to find
> >>>>> those
> >>>>> > > files ?
> >>>>> > > > >>> since
> >>>>> > > > >>> > > the
> >>>>> > > > >>> > > > >>>> qemu
> >>>>> > > > >>> > > > >>>> > > 5.1
> >>>>> > > > >>> > > > >>>> > > > > > >>> > installation files have been
> >>>>> placed under
> >>>>> > > > >>> /usr/local
> >>>>> > > > >>> > > > >>>> during the
> >>>>> > > > >>> > > > >>>> > > > > command
> >>>>> > > > >>> > > > >>>> > > > > > >>> > make install,I have also copied
> >>>>> the
> >>>>> > > firmware
> >>>>> > > > >>> files
> >>>>> > > > >>> > > in :
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > ls /usr/local/share/AAVMF
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_CODE.fd  AAVMF_CODE.fd
> >>>>> > > > >>> > > > >>>>  AAVMF_CODE.snakeoil.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> AAVMF_VARS.ms.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_VARS.fd  AAVMF_CODE.ms.fd
> >>>>> > > > >>> AAVMF_VARS.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> >           AAVMF_VARS.snakeoil.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > but they aren't still recognized.
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> Downgrading libvirt would not help
> >>>>> in this
> >>>>> > > > >>> specific
> >>>>> > > > >>> > > case.
> >>>>> > > > >>> > > > >>>> Since
> >>>>> > > > >>> > > > >>>> > > > > version
> >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2.0 libvirt uses firmware
> >>>>> auto-selection.
> >>>>> > > > >>> Libvirt is
> >>>>> > > > >>> > > > >>>> looking
> >>>>> > > > >>> > > > >>>> > > for
> >>>>> > > > >>> > > > >>>> > > > > json
> >>>>> > > > >>> > > > >>>> > > > > > >>> files describing available
> >>>>> firmwares. It is
> >>>>> > > > >>> > > documented in
> >>>>> > > > >>> > > > >>>> QEMU
> >>>>> > > > >>> > > > >>>> > > > > project
> >>>>> > > > >>> > > > >>>> > > > > > >>> git repository in
> >>>>> > > `docs/interop/firmware.json`,
> >>>>> > > > >>> this
> >>>>> > > > >>> > > > >>>> specific
> >>>>> > > > >>> > > > >>>> > > section
> >>>>> > > > >>> > > > >>>> > > > > > >>> describes where the json files
> >>>>> should be
> >>>>> > > placed:
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> # It is recommended to create
> >>>>> firmware JSON
> >>>>> > > > >>> files
> >>>>> > > > >>> > > (each
> >>>>> > > > >>> > > > >>>> > > containing a
> >>>>> > > > >>> > > > >>>> > > > > > >>> # single @Firmware root element)
> >>>>> with a
> >>>>> > > > >>> double-digit
> >>>>> > > > >>> > > > >>>> prefix, for
> >>>>> > > > >>> > > > >>>> > > > > example
> >>>>> > > > >>> > > > >>>> > > > > > >>> # "50-ovmf.json",
> >>>>> "50-seabios-256k.json",
> >>>>> > > etc,
> >>>>> > > > >>> so they
> >>>>> > > > >>> > > > >>>> can be
> >>>>> > > > >>> > > > >>>> > > sorted
> >>>>> > > > >>> > > > >>>> > > > > in
> >>>>> > > > >>> > > > >>>> > > > > > >>> # predictable order. The firmware
> >>>>> JSON files
> >>>>> > > > >>> should be
> >>>>> > > > >>> > > > >>>> searched
> >>>>> > > > >>> > > > >>>> > > for
> >>>>> > > > >>> > > > >>>> > > > > in
> >>>>> > > > >>> > > > >>>> > > > > > >>> # three directories:
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > > > >>> > > > >>>> > > > > > >>> #   - /usr/share/qemu/firmware --
> >>>>> populated
> >>>>> > > by
> >>>>> > > > >>> > > > >>>> distro-provided
> >>>>> > > > >>> > > > >>>> > > > > firmware
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>>  packages
> >>>>> > > > >>> > > (XDG_DATA_DIRS
> >>>>> > > > >>> > > > >>>> covers
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > >  /usr/share by
> >>>>> > > > >>> > > default),
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > > > >>> > > > >>>> > > > > > >>> #   - /etc/qemu/firmware --
> >>>>> exclusively for
> >>>>> > > > >>> sysadmins'
> >>>>> > > > >>> > > > >>>> local
> >>>>> > > > >>> > > > >>>> > > > > additions,
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > > > >>> > > > >>>> > > > > > >>> #   -
> >>>>> $XDG_CONFIG_HOME/qemu/firmware --
> >>>>> > > > >>> exclusively
> >>>>> > > > >>> > > for
> >>>>> > > > >>> > > > >>>> per-user
> >>>>> > > > >>> > > > >>>> > > > > local
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > > > >>>  additions
> >>>>> > > > >>> > > > >>>> > > (XDG_CONFIG_HOME
> >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >>>>> > > > >>>  defaults to
> >>>>> > > > >>> > > > >>>> > > $HOME/.config).
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> It doesn't matter where the *CODE*
> >>>>> and
> >>>>> > > *VARS*
> >>>>> > > > >>> firmware
> >>>>> > > > >>> > > > >>>> files are
> >>>>> > > > >>> > > > >>>> > > > > placed
> >>>>> > > > >>> > > > >>>> > > > > > >>> if the path to these files is
> >>>>> correct in the
> >>>>> > > > >>> json
> >>>>> > > > >>> > > files
> >>>>> > > > >>> > > > >>>> in one
> >>>>> > > > >>> > > > >>>> > > of the
> >>>>> > > > >>> > > > >>>> > > > > > >>> three directories.
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> Looking at the qemu-efi-arm package
> >>>>> it
> >>>>> > > should
> >>>>> > > > >>> install
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>>     /usr/share/AAVMF/AAVMF32_CODE.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>>     /usr/share/AAVMF/AAVMF32_VARS.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > >  /usr/share/qemu/firmware/60-edk2-arm.json
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> and that should be picked up
> >>>>> correctly by
> >>>>> > > > >>> libvirt.
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> I don't know what machine types are
> >>>>> > > available
> >>>>> > > > >>> for
> >>>>> > > > >>> > > 32bit
> >>>>> > > > >>> > > > >>>> ARM, but
> >>>>> > > > >>> > > > >>>> > > you
> >>>>> > > > >>> > > > >>>> > > > > > >>> should be able to figure that out by
> >>>>> > > running:
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>>     virsh capabilities | grep
> >>>>> canonical
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> it will show only lines with
> >>>>> machine types,
> >>>>> > > but
> >>>>> > > > >>> my
> >>>>> > > > >>> > > guess
> >>>>> > > > >>> > > > >>>> is on
> >>>>> > > > >>> > > > >>>> > > arm
> >>>>> > > > >>> > > > >>>> > > > > there
> >>>>> > > > >>> > > > >>>> > > > > > >>> should be 'virt' machine type so
> >>>>> running
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>>     virsh domcapabilities --machine
> >>>>> virt
> >>>>> > > > >>> --emulatorbin
> >>>>> > > > >>> > > > >>>> > > > > > >>> /path/to/qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> where you should be able to see the
> >>>>> firmware
> >>>>> > > > >>> paths if
> >>>>> > > > >>> > > > >>>> they are
> >>>>> > > > >>> > > > >>>> > > > > correctly
> >>>>> > > > >>> > > > >>>> > > > > > >>> detected by libvirt.
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> Pavel
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > On Tue, Aug 22, 2023 at 3:55 PM
> >>>>> Mario
> >>>>> > > > >>> Marietto <
> >>>>> > > > >>> > > > >>>> > > > > marietto2008 at gmail.com
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > I've already did that :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > # apt install qemu-efi-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading package lists... Done
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > Building dependency tree... Done
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading state information...
> >>>>> Done
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm is already the
> >>>>> newest
> >>>>> > > version
> >>>>> > > > >>> > > > >>>> (2022.11-6).
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm set to manually
> >>>>> installed.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > if I don't get wrong,that
> >>>>> package do the
> >>>>> > > > >>> > > installation
> >>>>> > > > >>> > > > >>>> of the
> >>>>> > > > >>> > > > >>>> > > > > > >>> following
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > files :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > root at devuan:/usr/share/AAVMF#
> >>>>> ls
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_CODE.fd  AAVMF_CODE.fd
> >>>>> > > > >>> > > > >>>>  AAVMF_CODE.snakeoil.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >  AAVMF_VARS.ms.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_VARS.fd
> >>>>> AAVMF_CODE.ms.fd
> >>>>> > > > >>> AAVMF_VARS.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >           AAVMF_VARS.snakeoil.fd
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > in my case they have been
> >>>>> correctly
> >>>>> > > placed
> >>>>> > > > >>> under
> >>>>> > > > >>> > > > >>>> > > /usr/share/AAVMF
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > I'm not sure that the problem
> >>>>> is there.
> >>>>> > > The
> >>>>> > > > >>> error
> >>>>> > > > >>> > > > >>>> message
> >>>>> > > > >>> > > > >>>> > > talks
> >>>>> > > > >>> > > > >>>> > > > > > >>> about the
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > libvirt version that could be
> >>>>> wrong.
> >>>>> > > What
> >>>>> > > > >>> about
> >>>>> > > > >>> > > if I
> >>>>> > > > >>> > > > >>>> > > retrocede
> >>>>> > > > >>> > > > >>>> > > > > > >>> libirt 7.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > to 6.9 for example. Why 6.9 ?
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > As you can read below,it
> >>>>> supports qemu
> >>>>> > > 5.0
> >>>>> > > > >>> and
> >>>>> > > > >>> > > > >>>> newer...
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > v6.9.0 (2020-11-02)
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    *New features*
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       nodedev: Add support for
> >>>>> channel
> >>>>> > > > >>> subsystem
> >>>>> > > > >>> > > (CSS)
> >>>>> > > > >>> > > > >>>> > > devices on
> >>>>> > > > >>> > > > >>>> > > > > > >>> S390
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       A CSS device is
> >>>>> represented as a
> >>>>> > > > >>> parent
> >>>>> > > > >>> > > device
> >>>>> > > > >>> > > > >>>> of a CCW
> >>>>> > > > >>> > > > >>>> > > > > device.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       This support allows to
> >>>>> create
> >>>>> > > vfio-ccw
> >>>>> > > > >>> > > mediated
> >>>>> > > > >>> > > > >>>> devices
> >>>>> > > > >>> > > > >>>> > > > > with
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       virNodeDeviceCreateXML().
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Implement memory
> >>>>> failure
> >>>>> > > event
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       New event is implemented
> >>>>> that is
> >>>>> > > > >>> emitted
> >>>>> > > > >>> > > > >>>> whenever a
> >>>>> > > > >>> > > > >>>> > > guest
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       encounters a memory
> >>>>> failure.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Implement support
> >>>>> for
> >>>>> > > > >>> <transient/>
> >>>>> > > > >>> > > disks
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       VMs based on the QEMU
> >>>>> hypervisor
> >>>>> > > now
> >>>>> > > > >>> can use
> >>>>> > > > >>> > > > >>>> > > <transient/>
> >>>>> > > > >>> > > > >>>> > > > > > >>> option
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       for local file-backed
> >>>>> disks to
> >>>>> > > > >>> configure a
> >>>>> > > > >>> > > disk
> >>>>> > > > >>> > > > >>>> which
> >>>>> > > > >>> > > > >>>> > > > > discards
> >>>>> > > > >>> > > > >>>> > > > > > >>> changes made
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       to it while the VM was
> >>>>> active.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       hyperv: implement new APIs
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       The
> >>>>> virConnectGetCapabilities(),
> >>>>> > > > >>> > > > >>>> > > virConnectGetMaxVcpus(),
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       virConnectGetVersion(),
> >>>>> > > > >>> > > virDomainGetAutostart(),
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       virDomainSetAutostart(),
> >>>>> > > > >>> > > virNodeGetFreeMemory(),
> >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainReboot(),
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       virDomainReset(),
> >>>>> > > > >>> virDomainShutdown(), and
> >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainShutdownFlags()
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       APIs have been
> >>>>> implemented in the
> >>>>> > > > >>> Hyper-V
> >>>>> > > > >>> > > > >>>> driver.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       bhyve: implement virtio-9p
> >>>>> > > filesystem
> >>>>> > > > >>> > > support
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Implement virito-9p shared
> >>>>> > > filesystem
> >>>>> > > > >>> using
> >>>>> > > > >>> > > the
> >>>>> > > > >>> > > > >>>> > > > > <filesystem/>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       element.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Add support for
> >>>>> vDPA network
> >>>>> > > > >>> devices.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       VMs using the QEMU
> >>>>> hypervisor can
> >>>>> > > now
> >>>>> > > > >>> > > specify
> >>>>> > > > >>> > > > >>>> vDPA
> >>>>> > > > >>> > > > >>>> > > network
> >>>>> > > > >>> > > > >>>> > > > > > >>> devices
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       using <interface
> >>>>> type='vdpa'>. The
> >>>>> > > > >>> node
> >>>>> > > > >>> > > device
> >>>>> > > > >>> > > > >>>> APIs
> >>>>> > > > >>> > > > >>>> > > also
> >>>>> > > > >>> > > > >>>> > > > > now
> >>>>> > > > >>> > > > >>>> > > > > > >>> list
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       and provide XML
> >>>>> descriptions for
> >>>>> > > vDPA
> >>>>> > > > >>> > > devices.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       cpu_map: Add EPYC-Rome
> >>>>> CPU model
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       *It's supported in QEMU
> >>>>> 5.0.0 and
> >>>>> > > > >>> newer.*
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       cpu: Add a flag for XML
> >>>>> > > validation in
> >>>>> > > > >>> CPU
> >>>>> > > > >>> > > > >>>> comparison
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       The virConnectCompareCPU
> >>>>> and
> >>>>> > > > >>> > > > >>>> > > virConnectCompareHypervisorCPU
> >>>>> > > > >>> > > > >>>> > > > > > >>> API now
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       support the
> >>>>> > > > >>> > > > >>>> VIR_CONNECT_COMPARE_CPU_VALIDATE_XML flag,
> >>>>> > > > >>> > > > >>>> > > > > which
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       enables XML validation.
> >>>>> For virsh,
> >>>>> > > > >>> this
> >>>>> > > > >>> > > feature
> >>>>> > > > >>> > > > >>>> is
> >>>>> > > > >>> > > > >>>> > > enabled
> >>>>> > > > >>> > > > >>>> > > > > by
> >>>>> > > > >>> > > > >>>> > > > > > >>> passing the
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       --validate option to the
> >>>>> > > cpu-compare
> >>>>> > > > >>> and
> >>>>> > > > >>> > > > >>>> > > > > hypervisor-cpu-compare
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       subcommands.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Introduce
> >>>>> virtio-balloon
> >>>>> > > free
> >>>>> > > > >>> page
> >>>>> > > > >>> > > > >>>> reporting
> >>>>> > > > >>> > > > >>>> > > feature
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Introduce the optional
> >>>>> attribute
> >>>>> > > > >>> > > > >>>> free-page-reporting
> >>>>> > > > >>> > > > >>>> > > for
> >>>>> > > > >>> > > > >>>> > > > > virtio
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       memballoon device. It
> >>>>> > > > >>> enables/disables the
> >>>>> > > > >>> > > > >>>> ability of
> >>>>> > > > >>> > > > >>>> > > the
> >>>>> > > > >>> > > > >>>> > > > > QEMU
> >>>>> > > > >>> > > > >>>> > > > > > >>> virtio
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       memory balloon to return
> >>>>> unused
> >>>>> > > pages
> >>>>> > > > >>> back
> >>>>> > > > >>> > > to
> >>>>> > > > >>> > > > >>>> the
> >>>>> > > > >>> > > > >>>> > > > > hypervisor.
> >>>>> > > > >>> > > > >>>> > > > > > >>> QEMU 5.1 and
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       newer support this
> >>>>> feature.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    *Improvements*
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Make 'cbitpos' &
> >>>>> > > > >>> 'reducedPhysBits'
> >>>>> > > > >>> > > attrs
> >>>>> > > > >>> > > > >>>> optional
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Libvirt probes the
> >>>>> underlying
> >>>>> > > > >>> platform in
> >>>>> > > > >>> > > order
> >>>>> > > > >>> > > > >>>> to
> >>>>> > > > >>> > > > >>>> > > fill in
> >>>>> > > > >>> > > > >>>> > > > > > >>> these
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       SEV attributes
> >>>>> automatically
> >>>>> > > before
> >>>>> > > > >>> > > launching a
> >>>>> > > > >>> > > > >>>> guest.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       util: support device stats
> >>>>> > > collection
> >>>>> > > > >>> for
> >>>>> > > > >>> > > > >>>> SR-IOV VF
> >>>>> > > > >>> > > > >>>> > > hostdev
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       For SR-IOV VF hostdevs,
> >>>>> libvirt
> >>>>> > > now
> >>>>> > > > >>> supports
> >>>>> > > > >>> > > > >>>> retrieving
> >>>>> > > > >>> > > > >>>> > > > > device
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       traffic stats via the
> >>>>> > > > >>> > > virDomainInterfaceStats
> >>>>> > > > >>> > > > >>>> API and
> >>>>> > > > >>> > > > >>>> > > virsh
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       domifstat.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       logging: Allow disabling
> >>>>> log
> >>>>> > > rollover
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Set max_len=0 in
> >>>>> virtlogd.conf to
> >>>>> > > > >>> disable
> >>>>> > > > >>> > > log
> >>>>> > > > >>> > > > >>>> rollover.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: Set noqueue qdisc
> >>>>> for TAP
> >>>>> > > > >>> devices
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Set noqueue instead of
> >>>>> the former
> >>>>> > > > >>> pfifo_fast
> >>>>> > > > >>> > > > >>>> queue
> >>>>> > > > >>> > > > >>>> > > > > discipline
> >>>>> > > > >>> > > > >>>> > > > > > >>> for
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       TAP devices. It will avoid
> >>>>> > > needless
> >>>>> > > > >>> cost of
> >>>>> > > > >>> > > > >>>> host CPU
> >>>>> > > > >>> > > > >>>> > > cycles
> >>>>> > > > >>> > > > >>>> > > > > > >>> and thus
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       improve performance.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       qemu: virtiofs can be
> >>>>> used without
> >>>>> > > > >>> NUMA
> >>>>> > > > >>> > > nodes
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Virtiofs is supported for
> >>>>> the VM
> >>>>> > > > >>> without
> >>>>> > > > >>> > > NUMA
> >>>>> > > > >>> > > > >>>> nodes but
> >>>>> > > > >>> > > > >>>> > > > > > >>> configured
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       with shared memory.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    *Bug fixes*
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >    -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       hyperv: ensure WQL
> >>>>> queries work
> >>>>> > > in all
> >>>>> > > > >>> > > locales
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       Relying on the
> >>>>> "Description" field
> >>>>> > > > >>> caused
> >>>>> > > > >>> > > > >>>> queries to
> >>>>> > > > >>> > > > >>>> > > fail
> >>>>> > > > >>> > > > >>>> > > > > on
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       non-"en-US" systems. The
> >>>>> queries
> >>>>> > > have
> >>>>> > > > >>> been
> >>>>> > > > >>> > > > >>>> updated to
> >>>>> > > > >>> > > > >>>> > > avoid
> >>>>> > > > >>> > > > >>>> > > > > > >>> using localized
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       strings.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       -
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       rpc: Fix virt-ssh-helper
> >>>>> detection
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       libvirt 6.8.0 failed to
> >>>>> correctly
> >>>>> > > > >>> detect the
> >>>>> > > > >>> > > > >>>> > > availability
> >>>>> > > > >>> > > > >>>> > > > > of
> >>>>> > > > >>> > > > >>>> > > > > > >>> the
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       new virt-ssh-helper
> >>>>> command on the
> >>>>> > > > >>> remote
> >>>>> > > > >>> > > host,
> >>>>> > > > >>> > > > >>>> and
> >>>>> > > > >>> > > > >>>> > > thus
> >>>>> > > > >>> > > > >>>> > > > > always
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >       used the fallback
> >>>>> instead; this
> >>>>> > > has
> >>>>> > > > >>> now been
> >>>>> > > > >>> > > > >>>> fixed.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > What do you think ? Can you
> >>>>> share some
> >>>>> > > > >>> > > documentation
> >>>>> > > > >>> > > > >>>> about
> >>>>> > > > >>> > > > >>>> > > how to
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > recompile an older version of
> >>>>> libvirt
> >>>>> > > from
> >>>>> > > > >>> source
> >>>>> > > > >>> > > > >>>> code ?
> >>>>> > > > >>> > > > >>>> > > thanks.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > On Tue, Aug 22, 2023 at 3:35 PM
> >>>>> Pavel
> >>>>> > > > >>> Hrdina <
> >>>>> > > > >>> > > > >>>> > > phrdina at redhat.com
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> On Tue, Aug 22, 2023 at
> >>>>> 02:49:05PM
> >>>>> > > +0200,
> >>>>> > > > >>> Mario
> >>>>> > > > >>> > > > >>>> Marietto
> >>>>> > > > >>> > > > >>>> > > wrote:
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Hello to everyone.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > I'm trying to use qemu 5.1
> >>>>> with
> >>>>> > > > >>> virt-manager
> >>>>> > > > >>> > > and
> >>>>> > > > >>> > > > >>>> libvirt
> >>>>> > > > >>> > > > >>>> > > on
> >>>>> > > > >>> > > > >>>> > > > > my ARM
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > chromebook (armhf 32 bit
> >>>>> cpu) running
> >>>>> > > > >>> with
> >>>>> > > > >>> > > Devuan
> >>>>> > > > >>> > > > >>>> 4 as
> >>>>> > > > >>> > > > >>>> > > host
> >>>>> > > > >>> > > > >>>> > > > > o.s.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > By default it uses qemu and
> >>>>> its
> >>>>> > > > >>> > > > >>>> dependencies,version 5.2.
> >>>>> > > > >>> > > > >>>> > > I
> >>>>> > > > >>> > > > >>>> > > > > > >>> remember
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> that I
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use qemu 5.2,because
> >>>>> it doesn't
> >>>>> > > > >>> have any
> >>>>> > > > >>> > > > >>>> support for
> >>>>> > > > >>> > > > >>>> > > > > KVM as
> >>>>> > > > >>> > > > >>>> > > > > > >>> you
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> can
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > read here :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > >
> >>>>> > >
> >>>>> https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02074.html
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > For this reason,I've
> >>>>> compiled qemu
> >>>>> > > 5.1
> >>>>> > > > >>> from
> >>>>> > > > >>> > > > >>>> source. Below
> >>>>> > > > >>> > > > >>>> > > I
> >>>>> > > > >>> > > > >>>> > > > > shown
> >>>>> > > > >>> > > > >>>> > > > > > >>> how I
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > have configured everything
> >>>>> such as a
> >>>>> > > > >>> little
> >>>>> > > > >>> > > piece
> >>>>> > > > >>> > > > >>>> of
> >>>>> > > > >>> > > > >>>> > > > > compilation
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> messages :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # apt install libgtk-3-dev
> >>>>> > > libpulse-dev
> >>>>> > > > >>> > > libgbm-dev
> >>>>> > > > >>> > > > >>>> > > > > > >>> libspice-protocol-dev
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > libspice-server-dev
> >>>>> libusb-1.0-0-dev
> >>>>> > > > >>> > > libepoxy-dev
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # cp
> >>>>> > > > >>> > > > >>>>
> >>>>> /root/Desktop/qemu-v5.1.0/arm-softmmu/qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>> /usr/bin
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # CFLAGS=-Wno-error
> >>>>> ./configure
> >>>>> > > > >>> > > > >>>> > > --target-list=x86_64-softmmu
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --enable-opengl
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > --enable-gtk --enable-kvm
> >>>>> > > > >>> --enable-guest-agent
> >>>>> > > > >>> > > > >>>> > > --enable-spice
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --audio-drv-
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > list="oss pa" --enable-libusb
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > A little piece of the log
> >>>>> messages
> >>>>> > > that
> >>>>> > > > >>> I've
> >>>>> > > > >>> > > got
> >>>>> > > > >>> > > > >>>> from the
> >>>>> > > > >>> > > > >>>> > > > > > >>> compilation of
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > qemu 5.1 :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> https://pastebin.ubuntu.com/p/8DYfgPvhXy/
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > These are the resulting
> >>>>> versions of
> >>>>> > > my
> >>>>> > > > >>> > > frankenstein
> >>>>> > > > >>> > > > >>>> > > operation
> >>>>> > > > >>> > > > >>>> > > > > :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # virsh version
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library:
> >>>>> libvirt
> >>>>> > > 7.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 7.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 7.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU
> >>>>> 5.1.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > At this point I ran
> >>>>> virt-manager. It
> >>>>> > > has
> >>>>> > > > >>> been
> >>>>> > > > >>> > > able
> >>>>> > > > >>> > > > >>>> to
> >>>>> > > > >>> > > > >>>> > > detect
> >>>>> > > > >>> > > > >>>> > > > > > >>> qemu,but I
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> get
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > the following error :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Warning : Failed to set up
> >>>>> UEFI.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > The Libvirt version does not
> >>>>> support
> >>>>> > > > >>> UEFI.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Install options are limited.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > (I have also tried upgrading
> >>>>> devuan 4
> >>>>> > > > >>> with
> >>>>> > > > >>> > > devuan
> >>>>> > > > >>> > > > >>>> 5 and
> >>>>> > > > >>> > > > >>>> > > I've
> >>>>> > > > >>> > > > >>>> > > > > got
> >>>>> > > > >>> > > > >>>> > > > > > >>> the
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> same
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > error :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> You most likely need to install
> >>>>> > > > >>> qemu-efi-arm
> >>>>> > > > >>> > > package
> >>>>> > > > >>> > > > >>>> which
> >>>>> > > > >>> > > > >>>> > > > > should
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> provide 32bit arm firmware
> >>>>> files. The
> >>>>> > > > >>> package
> >>>>> > > > >>> > > name
> >>>>> > > > >>> > > > >>>> is a bit
> >>>>> > > > >>> > > > >>>> > > > > > >>> confusing
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> as it doesn't originate from
> >>>>> qemu
> >>>>> > > project,
> >>>>> > > > >>> it is
> >>>>> > > > >>> > > > >>>> from edk2
> >>>>> > > > >>> > > > >>>> > > > > project.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Without this package libvirt
> >>>>> most
> >>>>> > > likely
> >>>>> > > > >>> doesn't
> >>>>> > > > >>> > > > >>>> report any
> >>>>> > > > >>> > > > >>>> > > efi
> >>>>> > > > >>> > > > >>>> > > > > > >>> files
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> and that's what causes the
> >>>>> error you
> >>>>> > > are
> >>>>> > > > >>> hitting.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Pavel
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > root at devuan:/usr/bin# virsh
> >>>>> version
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library:
> >>>>> libvirt
> >>>>> > > 9.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 9.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 9.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU
> >>>>> 5.1.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > If I change qemu-system-arm
> >>>>> vers. 5.1
> >>>>> > > > >>> with
> >>>>> > > > >>> > > > >>>> qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2,the error
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > disappears. So,it seems that
> >>>>> libvirt
> >>>>> > > > >>> does not
> >>>>> > > > >>> > > > >>>> accept
> >>>>> > > > >>> > > > >>>> > > > > > >>> qemu-system-arm
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> vers.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > 5.1 or maybe any version
> >>>>> lower than
> >>>>> > > > >>> 5.2,I don't
> >>>>> > > > >>> > > > >>>> know. But
> >>>>> > > > >>> > > > >>>> > > as
> >>>>> > > > >>> > > > >>>> > > > > I've
> >>>>> > > > >>> > > > >>>> > > > > > >>> said,I
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use any version of qemu
> >>>>> > > greater or
> >>>>> > > > >>> equal
> >>>>> > > > >>> > > to
> >>>>> > > > >>> > > > >>>> 5.2 on
> >>>>> > > > >>> > > > >>>> > > my
> >>>>> > > > >>> > > > >>>> > > > > > >>> setup. And I
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > want to use virt-manager and
> >>>>> libvirt
> >>>>> > > > >>> because I
> >>>>> > > > >>> > > > >>>> find these
> >>>>> > > > >>> > > > >>>> > > > > tools
> >>>>> > > > >>> > > > >>>> > > > > > >>> very
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > comfortable instead of using
> >>>>> the
> >>>>> > > "raw"
> >>>>> > > > >>> qemu
> >>>>> > > > >>> > > > >>>> parameters. Is
> >>>>> > > > >>> > > > >>>> > > > > there a
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > workaround ? Maybe I can
> >>>>> recompile
> >>>>> > > > >>> virt-manager
> >>>>> > > > >>> > > > >>>> and / or
> >>>>> > > > >>> > > > >>>> > > > > libvirt
> >>>>> > > > >>> > > > >>>> > > > > > >>> from
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> the
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > source code ? but how ? Do
> >>>>> you think
> >>>>> > > > >>> that it
> >>>>> > > > >>> > > could
> >>>>> > > > >>> > > > >>>> work
> >>>>> > > > >>> > > > >>>> > > if I
> >>>>> > > > >>> > > > >>>> > > > > use
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> something
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > like this (if it exists and
> >>>>> if it
> >>>>> > > can be
> >>>>> > > > >>> > > reached
> >>>>> > > > >>> > > > >>>> in some
> >>>>> > > > >>> > > > >>>> > > way)
> >>>>> > > > >>> > > > >>>> > > > > :
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against library:
> >>>>> libvirt
> >>>>> > > 5.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library: libvirt 5.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU 5.0.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor: QEMU
> >>>>> 5.1.0
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > thanks.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > --
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Mario.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > --
> >>>>> > > > >>> > > > >>>> > > > > > >>> > > Mario.
> >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >>>>> > > > >>> > > > >>>> > > > > > >>> > --
> >>>>> > > > >>> > > > >>>> > > > > > >>> > Mario.
> >>>>> > > > >>> > > > >>>> > > > > > >>>
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >> --
> >>>>> > > > >>> > > > >>>> > > > > > >> Mario.
> >>>>> > > > >>> > > > >>>> > > > > > >>
> >>>>> > > > >>> > > > >>>> > > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > > --
> >>>>> > > > >>> > > > >>>> > > > > > > Mario.
> >>>>> > > > >>> > > > >>>> > > > > > >
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > >
> >>>>> > > > >>> > > > >>>> > > > > > --
> >>>>> > > > >>> > > > >>>> > > > > > Mario.
> >>>>> > > > >>> > > > >>>> > > > >
> >>>>> > > > >>> > > > >>>> > > >
> >>>>> > > > >>> > > > >>>> > > >
> >>>>> > > > >>> > > > >>>> > > > --
> >>>>> > > > >>> > > > >>>> > > > Mario.
> >>>>> > > > >>> > > > >>>> > >
> >>>>> > > > >>> > > > >>>> >
> >>>>> > > > >>> > > > >>>> >
> >>>>> > > > >>> > > > >>>> > --
> >>>>> > > > >>> > > > >>>> > Mario.
> >>>>> > > > >>> > > > >>>>
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>> --
> >>>>> > > > >>> > > > >>> Mario.
> >>>>> > > > >>> > > > >>>
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >> --
> >>>>> > > > >>> > > > >> Mario.
> >>>>> > > > >>> > > > >>
> >>>>> > > > >>> > > > >
> >>>>> > > > >>> > > > >
> >>>>> > > > >>> > > > > --
> >>>>> > > > >>> > > > > Mario.
> >>>>> > > > >>> > > > >
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > >
> >>>>> > > > >>> > > > --
> >>>>> > > > >>> > > > Mario.
> >>>>> > > > >>> > >
> >>>>> > > > >>> > >
> >>>>> > > > >>> > >
> >>>>> > > > >>> >
> >>>>> > > > >>> > --
> >>>>> > > > >>> > Mario.
> >>>>> > > > >>>
> >>>>> > > > >>
> >>>>> > > > >>
> >>>>> > > > >> --
> >>>>> > > > >> Mario.
> >>>>> > > > >>
> >>>>> > > > >
> >>>>> > > > >
> >>>>> > > > > --
> >>>>> > > > > Mario.
> >>>>> > > > >
> >>>>> > > >
> >>>>> > > >
> >>>>> > > > --
> >>>>> > > > Mario.
> >>>>> > >
> >>>>> >
> >>>>> >
> >>>>> > --
> >>>>> > Mario.
> >>>>>
> >>>>
> >>>>
> >>>> --
> >>>> Mario.
> >>>>
> >>>
> >>>
> >>> --
> >>> Mario.
> >>>
> >>
> >>
> >> --
> >> Mario.
> >>
> >
> >
> > --
> > Mario.
> >
> 
> 
> -- 
> Mario.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/virt-tools-list/attachments/20230825/92110493/attachment.sig>


More information about the virt-tools-list mailing list