<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">you mean "#xend start" and "#./xendomains start" doesn't work in /etc/init.d? At first place dom0 must be listed in #xm list as a running domain Regards, Fasiha Ashraf --- On Fri, 6/11/09, Caz Yokoyama <cazyokoyama@gmail.com> wrote: <blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> From: Caz Yokoyama <cazyokoyama@gmail.com> Subject: RE: [Xen-devel] Virt-manager issue resolved To: "'Fasiha Ashraf'" <feehapk@yahoo.co.in>, "'xen'" <xen-devel@lists.xensource.com> Cc: "'Fedora Xen'" <fedora-xen@redhat.com>, virt-tools-list@redhat.com Date: Friday, 6 November, 2009, 5:03 PM <div id="yiv543977829"> <style>  </style> <div class="Section1"> Hello Fasiha, [root@tragi caz]# iptables -F [root@tragi caz]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [root@tragi caz]# sh -x /etc/init.d/xend start + . /etc/rc.d/init.d/functions ++ TEXTDOMAIN=initscripts ++ umask 022 ++ PATH=/sbin:/usr/sbin:/bin:/usr/bin ++ export PATH ++ '[' -z '' ']' ++ COLUMNS=80 ++ '[' -z '' ']' +++ /sbin/consoletype ++ CONSOLETYPE=pty ++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']' ++ . /etc/profile.d/lang.sh +++ sourced=0 +++ '[' -n en_US.UTF-8 ']' +++ saved_lang=en_US.UTF-8 +++ '[' -f /root/.i18n ']' +++ LANG=en_US.UTF-8 +++ unset saved_lang +++ '[' 0 = 1 ']' +++ unset sourced +++ unset langfile ++ unset LANGSH_SOURCED ++ '[' -z '' ']' ++ '[' -f /etc/sysconfig/init ']' ++ . /etc/sysconfig/init +++ BOOTUP=color +++ RES_COL=60 +++ MOVE_TO_COL='echo -en \033[60G' +++ SETCOLOR_SUCCESS='echo -en \033[0;32m' +++ SETCOLOR_FAILURE='echo -en \033[0;31m' +++ SETCOLOR_WARNING='echo -en \033[0;33m' +++ SETCOLOR_NORMAL='echo -en \033[0;39m' +++ LOGLEVEL=3 +++ PROMPT=yes +++ AUTOSWAP=no ++ '[' pty = serial ']' ++ __sed_discard_ignored_files='/$~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpmsave$$/d' + '[' '!' -d /proc/xen ']' + grep -q control_d /proc/xen/capabilities + RETVAL=0 + case "$1" in + start + echo -n 'Starting xend daemon: ' Starting xend daemon: + /usr/sbin/xend + RETVAL=1 + test 1 = 0 + echo_failure + '[' color = color ']' + echo -en '\033[60G' + echo -n '[' [+ '[' color = color ']' + echo -en '\033[0;31m' + echo -n FAILED FAILED+ '[' color = color ']' + echo -en '\033[0;39m' + echo -n ']' ]+ echo -ne '\r' + return 1 + echo + '[' 1 -eq 0 ']' + exit 1 [root@tragi caz]# sh -x /etc/init.d/xendomains start + '[' -e /proc/xen/privcmd ']' + LOCKFILE=/var/lock/subsys/xendomains + XENDOM_CONFIG=/etc/sysconfig/xendomains + test -r /etc/sysconfig/xendomains + . /etc/sysconfig/xendomains ++ XENDOMAINS_SYSRQ= ++ XENDOMAINS_USLEEP=100000 ++ XENDOMAINS_CREATE_USLEEP=5000000 ++ XENDOMAINS_MIGRATE= ++ XENDOMAINS_SAVE=/var/lib/xen/save ++ XENDOMAINS_SHUTDOWN='--halt --wait' ++ XENDOMAINS_SHUTDOWN_ALL='--all --halt --wait' ++ XENDOMAINS_RESTORE=true ++ XENDOMAINS_AUTO=/etc/xen/auto ++ XENDOMAINS_AUTO_ONLY=false ++ XENDOMAINS_STOP_MAXWAIT=300 /etc/init.d/xendomains: line 125: syntax error near unexpected token `<' /etc/init.d/xendomains: line 125: ` if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel); fi' [root@tragi caz]# xm info Error: Unable to connect to xend: No such file or directory. Is xend running? The line which produces syntax error above does not produces an error when it is invoked manually. What xendomains do you have? -caz <div> <div class="MsoNormal" style="margin-left: 42pt; text-align: center;" align="center"> <hr tabindex="-1" size="2" width="100%" align="center"> </div> From: Fasiha Ashraf [mailto:feehapk@yahoo.co.in] Sent: Thursday, November 05, 2009 10:42 PM To: 'xen'; Caz Yokoyama Cc: 'Fedora Xen'; virt-tools-list@redhat.com Subject: RE: [Xen-devel] Virt-manager issue resolved </div> <table class="MsoNormalTable" style="width: 551.2pt; margin-left: 42pt;" border="0" cellpadding="0" cellspacing="0" width="735"> <tbody><tr> <td style="padding: 0mm;" valign="top"> Try starting xend and xendomains after flushing iptable rules. #iptables -F run #iptables -F then #xend start and then inside /etc/init.d #./xendomains start now to check whether xend is running or not. Use #xm info or #xm list Regards, Fasiha Ashraf --- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama@gmail.com> wrote: From: Caz Yokoyama <cazyokoyama@gmail.com> Subject: RE: [Xen-devel] Virt-manager issue resolved To: "'Fasiha Ashraf'" <feehapk@yahoo.co.in>, "'xen'" <xen-devel@lists.xensource.com> Cc: "'Fedora Xen'" <fedora-xen@redhat.com>, virt-tools-list@redhat.com Date: Thursday, 5 November, 2009, 5:21 PM <div id="yiv359842134"> <div> Hello Fasiha, [root@tragi caz]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Thank you. -caz <div> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr tabindex="-1" size="2" width="100%" align="center"> </div> </div> From: Fasiha Ashraf [mailto:feehapk@yahoo.co.in] Sent: Thursday, November 05, 2009 1:07 AM To: 'xen'; Caz Yokoyama Cc: virt-tools-list@redhat.com; 'Fedora Xen' Subject: RE: [Xen-devel] Virt-manager issue resolved </div> <table class="MsoNormalTable" style="width: 509.2pt; margin-left: 42pt;" border="0" cellpadding="0" cellspacing="0" width="679"> <tbody><tr> <td style="padding: 0mm;" valign="top"> Please send the output of #iptables -L Regards, Fasiha Ashraf --- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama@gmail.com> wrote: From: Caz Yokoyama <cazyokoyama@gmail.com> Subject: RE: [Xen-devel] Virt-manager issue resolved To: "'Fasiha Ashraf'" <feehapk@yahoo.co.in>, "'xen'" <xen-devel@lists.xensource.com> Cc: virt-tools-list@redhat.com, "'Fedora Xen'" <fedora-xen@redhat.com> Date: Thursday, 5 November, 2009, 11:03 AM <div id="yiv966124073"> <div> Hello Fasiha, Thank you for summarizing the procedure. I don’t have xend running. Here is the procedure I did. Install Fedora 11 x86_64, full update. su yum install transfig texi2html libaio-devel dev86 glibc-devel.i586 yum install PyXML bridge-utils qemu-img qemu-common wget http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/5.fc12/src/xen-3.4.1-5.fc12.src.rpm rpm -ivh xen-3.4.1-5.fc12.src.rpm cd cd rpmbuild/SPECS/ rpmbuild -bb xen.spec cd ~/rpmbuild/RPMS/x86_64 rpm -ivh *.rpm cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF [virt-preview] name=Virtualization Rawhide for Fedora 11 baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/ enabled=1 gpgcheck=0 EOF yum install libvirt libvirt-python python-virtinst virt-manager virt-viewer rpm -qa | grep virt cd virt-manager git clone git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git JeremyDom0 make menuconfig make all su make modules_install install reboot with xen > Does "virsh list" work # virsh list error: Unable to connect to ‘localhost:8000’: Connection refused error: failed to connect to the hypervisor “/etc/init.d/xend start” failed because /usr/sbin/xend returns 1. Suggestion? I have attached .config. -caz <div> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr tabindex="-1" size="2" width="100%" align="center"> </div> </div> From: Fasiha Ashraf [mailto:feehapk@yahoo.co.in] Sent: Thursday, October 29, 2009 10:31 PM To: 'xen'; Caz Yokoyama Cc: virt-tools-list@redhat.com; 'Fedora Xen' Subject: RE: [Xen-devel] Virt-manager issue resolved </div> <table class="MsoNormalTable" style="width: 467.2pt; margin-left: 42pt;" border="0" cellpadding="0" cellspacing="0" width="623"> <tbody><tr> <td style="padding: 0mm;" valign="top"> Latest virt-manager doesn't work with the previous version of libvirt on fc11. You need to build xen and latest libvirt form rpm. Follow the steps below. Install packages required by rpmbuild:- <code># yum install transfig texi2html libaio-devel dev86 glibc-devel.i586</code> Download xen-3.4.1-1.fc12.src.rpm <code># wget http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/src/xen-3.4.1-1.fc12.src.rpm</code> <code># rpm -iv xen-3.4.1-1.fc12.src.rpm</code> <code># cd /root/rpmbuild/SPECS</code> <code># rpmbuild -ba ./xen.spec</code> To install hypervisor and tools <code># cd ../RPMS/x86_64</code> <code># yum install xen-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-debuginfo-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-devel-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-doc-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-hypervisor-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-libs-3.4.1-1.fc11.x86_64.rpm \</code> <code>xen-runtime-3.4.1-1.fc11.x86_64.rpm</code> To install new libvirt-0.7.0-6 <code># cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF</code> <code>[virt-preview]</code> <code>name=Virtualization Rawhide for Fedora 11</code> <code>baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/</code> <code>enabled=1</code> <code>gpgcheck=0</code> <code>EOF</code> <code># yum install libvirt libvirt-python python-virtinst \</code> <code>virt-manager virt-viewer</code> <code># rpm -qa|grep virt</code> <code>the following list must be there may be with higher version numbers.</code> <code>libvirt-client-0.7.0-6.fc11.x86_64</code> <code>libvirt-python-0.7.0-6.fc11.x86_64</code> <code>virt-viewer-0.2.0-1.fc11.x86_64</code> <code>virt-manager-0.7.0-5.fc11.x86_64</code> <code>libvirt-0.7.0-6.fc11.x86_64</code> <code>python-virtinst-0.500.0-1.fc11.noarch</code> All the above steps should be done on the base kernel. Now compile and build xen with paravirt kernel. Now boot into the new xen kernel after starting xend run this <code># xm info</code> <code>to check. now you can use virt-manager in your set-up</code> Regards, Fasiha Ashraf --- On Thu, 29/10/09, Caz Yokoyama <cazyokoyama@gmail.com> wrote: From: Caz Yokoyama <cazyokoyama@gmail.com> Subject: RE: [Xen-devel] Virt-manager issue resolved To: "'Fasiha Ashraf'" <feehapk@yahoo.co.in>, "'xen'" <xen-devel@lists.xensource.com> Cc: virt-tools-list@redhat.com, "'Fedora Xen'" <fedora-xen@redhat.com> Date: Thursday, 29 October, 2009, 6:19 PM <div id="yiv2102399157"> <div> Could you summarize the procedure? I am trying to run virt-manager on Fedora 11 with Xen-3.5-unstable and Jeremy’s Dom0 (git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git). I am wondering what option should be good on make on xen-3.5-unstable. I did Make xen tools Make install-xen install-tools What else I need do? Booting dom0 is fine. -caz <div> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr tabindex="-1" size="2" width="100%" align="center"> </div> </div> From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Fasiha Ashraf Sent: Tuesday, October 27, 2009 4:49 AM To: Cole Robinson; xen Cc: Fedora Xen; virt-tools-list@redhat.com Subject: [Xen-devel] Virt-manager issue resolved </div> <table class="MsoNormalTable" style="width: 425.2pt; margin-left: 42pt;" border="0" cellpadding="0" cellspacing="0" width="567"> <tbody><tr> <td style="padding: 0mm;" valign="top"> I have got para-virt option enabled by installing vm using through http. the problem was, i was trying to install it from DVD. Now the issue is it doesn't find the file on the givern location although i can access them from the same location in browser. PFA, the screen shots for the problem. Regards Fasiha Ashraf --- On Mon, 26/10/09, Cole Robinson <crobinso@redhat.com> wrote: From: Cole Robinson <crobinso@redhat.com> Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not found: xenUnifiedDomainLookupByName To: "Fasiha Ashraf" <feehapk@yahoo.co.in> Cc: virt-tools-list@redhat.com, bderzhavets@yahoo.com, "Xen users" <james.harper@bendigoit.com.au>, "Fedora Xen" <fedora-xen@redhat.com> Date: Monday, 26 October, 2009, 7:08 PM <div> On 10/26/2009 09:24 AM, Fasiha Ashraf wrote: > It seem that its trying to install HVM guest that is not possible using virt-manager. > But you can see from the attached screen shot that virt type option is disabled and i can't select paravirt from it. what should i do? > here's the log .virt-manager/virt-manager.log > Please include the other information I asked for: virsh --connect xen:/// capabilities virsh --connect xen:/// version - Cole > [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0 > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0 > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877) Default storage path is: /var/lib/libvirt/images/f.img > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume 'f.img'. > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (DistroInstaller:119) DistroInstaller location is a local file/path: /dev/sr0 > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877) Default storage path is: /var/lib/libvirt/images/f.img > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (VirtualDisk:737) Path '/var/lib/libvirt/images' is target for pool 'default'. Creating volume 'f.img'. > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516) Creating a VM f > Type: xen,hvm > UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3 > Install Source: /dev/sr0 > OS: linux:fedora11 > Kernel args: None > Memory: 512 > Max Memory: 512 > # VCPUs: 1 > Filesize: 7.0 > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565) Starting background install process > [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950) Creating storage volume 'f.img' with xml: > <volume> > <name>f.img</name> > <capacity>7516192768</capacity> > <allocation>7516192768</allocation> > <target> > <format type='raw'/> > </target> > </volume> > [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973) Storage volume 'f.img' install complete. > [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724) Creating guest from: > <domain type='xen'> > <name>f</name> > <currentMemory>524288</currentMemory> > <memory>524288</memory> > <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid> > <os> > <type arch='x86_64'>hvm</type> > <loader>/usr/lib/xen/boot/hvmloader</loader> > <boot dev='cdrom'/> > </os> > <features> > <acpi/><apic/><pae/> > </features> > <clock offset="utc"/> > <on_poweroff>destroy</on_poweroff> > <on_reboot>destroy</on_reboot> > <on_crash>destroy</on_crash> > <vcpu>1</vcpu> > <devices> > <emulator>/usr/lib64/xen/bin/qemu-dm</emulator> > <disk type='file' device='disk'> > <source file='/var/lib/libvirt/images/f.img'/> > <target dev='hda' bus='ide'/> > </disk> > <disk type='block' device='cdrom'> > <source dev='/dev/sr0'/> > <target dev='hdc' bus='ide'/> > <readonly/> > </disk> > <interface type='bridge'> > <source bridge='eth0'/> > <mac address='00:16:36:08:9e:36'/> > </interface> > <input type='tablet' bus='usb'/> > <graphics type='vnc' port='-1'/> > <console type='pty'/> > <sound model='es1370'/> > </devices> > </domain> > > [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (netdevhelper:176) Adding net device vif3.0 fe:ff:ff:ff:ff:ff /sys/class/net/vif3.0 (bridge: None) > [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate. > [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate. > [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate. > [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187) Tick is slow, not running at requested rate. > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (netdevhelper:138) Removing physical net device vif3.0 from list. > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (opticalhelper:205) Optical device removed: /org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76) Uncaught Error: Unable to complete install: 'POST operation failed: xend_post: error from xen $ > Traceback (most recent call last): > File "/usr/share/virt-manager/virtManager/create.py", line 1575, in do_install > dom = guest.start_install(False, meter = meter) > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install > return self._do_install(consolecb, meter, removeOld, wait) > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in _do_install > self.domain = self.conn.createLinux(install_xml, 0) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in createLinux > if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self) > libvirtError: POST operation failed: xend_post: error from xen daemon: <Fault 3: 'f'> > ' > [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377) window counter decremented to 0 > [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385) Exiting app normally. > > > > Fasiha Ashraf > > --- On Mon, 26/10/09, Cole Robinson <crobinso@redhat.com> wrote: > > From: Cole Robinson <crobinso@redhat.com> > Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not found: xenUnifiedDomainLookupByName > To: "Fasiha Ashraf" <feehapk@yahoo.co.in> > Cc: virt-tools-list@redhat.com, bderzhavets@yahoo.com, "Xen users" <james.harper@bendigoit.com.au>, "Fedora Xen" <fedora-xen@redhat.com> > Date: Monday, 26 October, 2009, 5:58 PM > > On 10/26/2009 06:48 AM, Fasiha Ashraf wrote: >> Hi all >> I am facing this error while installing Guest VM on FC11 using virt-manager >> Unable to complete install '<class 'libvirt.libvirtError'> Domain not found: xenUnifiedDomainLookupByName >> Traceback (most recent call last): >> File "/usr/share/virt-manager/virtManager/create.py", line 1575, in do_install >> dom = guest.start_install(False, meter = meter) >> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in start_install >> return self._do_install(consolecb, meter, removeOld, wait) >> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in _do_install >> self.domain = self.conn.createLinux(install_xml, 0) >> File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in createLinux >> if ret is >> None:raise libvirtError('virDomainCreateLinux() failed', conn=self) >> libvirtError: Domain not found: xenUnifiedDomainLookupByName >> ' >> What should i do to avoid it? please help! >> Boris! How did you create PV guests using virt-manager i am following your article >> <a rel="nofollow" target="_blank" href="http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-dom0-on-to-fedora-11-64-bit/#comment-623">http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-dom0-on-to-fedora-11-64-bit/#comment-623</a> >> PFA, a screen-shot of the virt-manager >> >> Regards, >> Fasiha Ashraf >> > > CCing fedora-xen list. > > Rather than a screenshot, can you include: > > ~/.virt-manager/virt-manager.log > virsh --connect xen:/// capabilities > virsh --connect xen:/// version > > Thanks, > Cole </div> </td> </tr> </tbody></table> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr size="1" width="100%" align="center"> </div> </div> Yahoo! India has a new look. <a rel="nofollow" target="_blank" href="http://in.rd.yahoo.com/tagline_metro_2/*http:/in.yahoo.com/trynew">Take a sneak peek</a>. </div> </div> -----Inline Attachment Follows----- <div> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com <a rel="nofollow" target="_blank" href="http://lists.xensource.com/xen-devel">http://lists.xensource.com/xen-devel</a> </div> </td> </tr> </tbody></table> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr size="1" width="100%" align="center"> </div> </div> Add whatever you love to the Yahoo! India homepage. <a rel="nofollow" target="_blank" href="http://in.rd.yahoo.com/tagline_metro_3/*http:/in.yahoo.com/trynew">Try now!</a> </div> </div> </td> </tr> </tbody></table> <div style="margin-left: 42pt;"> <div class="MsoNormal" style="text-align: center;" align="center"> <hr size="1" width="100%" align="center"> </div> </div> Now, send attachments up to 25MB with Yahoo! India Mail. <a rel="nofollow" target="_blank" href="http://in.rd.yahoo.com/tagline_galaxy_2/*http:/in.overview.mail.yahoo.com/photos">Learn how</a>. </div> </div> -----Inline Attachment Follows----- <div> _______________________________________________ Xen-devel mailing list <a rel="nofollow">Xen-devel@lists.xensource.com</a> <a rel="nofollow" target="_blank" href="http://lists.xensource.com/xen-devel">http://lists.xensource.com/xen-devel</a> </div> </td> </tr> </tbody></table> <div class="MsoNormal" style="margin-left: 42pt; text-align: center;" align="center"> <hr size="1" width="100%" align="center"> </div> Now, send attachments up to 25MB with Yahoo! India Mail. <a rel="nofollow" target="_blank" href="http://in.rd.yahoo.com/tagline_galaxy_2/*http:/in.overview.mail.yahoo.com/photos">Learn how</a>. </div> </div></blockquote></td></tr></table> <hr size=1></hr> From cricket scores to your friends. Try the <a href="http://in.rd.yahoo.com/tagline_metro_4/*http://in.yahoo.com/trynew" target="_blank">Yahoo! India Homepage!</a>