Quick (hopefully) help w/ dmraid - resent due to non-member block

[Mike Javorski]

well that got me further, then I got the following:

<snip>

In file included from internal.h:39,
                 from activate/activate.c:24:
device/dev-io.h:41: error: field `geometry' has incomplete type
make: *** [activate/activate.o] Error 1

<snip>

after doing some digging (aka googling) I wound up switching
"hd_geometry" in for "hd_big_geometry" in device/dev-io.h and it
compiled just fine.

so now running dmraid -v -ay generates the following:

Failed to find sysfs mount point
Carrying on with /dev/
hpt37x_dddjhcefg: 0 312602880 striped 2 128 /dev/hde 10 /dev/hdg 10
Activated stripe RAID set hpt37x_dddjhcefg

now this hpt37x_dddjhcefg doesn't seem to be a usable partition as far
as I can tell, so I don't know what the next step would be. 


For completeness, this machine is running a 2.6.8 kernel w/ udev +
device-mapper-1.00.19 + evms-2.3.4


anybody have any ideas? Thanks in advance...

- mike



On Mon, 2004-08-16 at 00:54, Luca Berra wrote:
> On Sun, Aug 15, 2004 at 04:31:32PM -0700, Mike Javorski wrote:
> >When trying to compile this latest version (1.0.0-rc2) of dmraid it just
> >loops through the dependecy build process. I have let it sit there for 5
> >minutes and it just loops and loops and loops.
> >
> as discussed before it seems an issue with make 3.80
> using "make -s" or "make -d" instead of just "make" works around this.
>