raid 0 with 3 drives doesn't work

[Heinz Mauelshagen]

On Wed, Apr 20, 2005 at 09:45:47PM -0700, ben morse wrote:
> I already emaild this to Heinz, but I can't get raid 0 to work on my 
> machine with 3 devices.  It works just fine with 2, but not with 3.   
> When I setup 3 devices, the stride gets read totally wrong, and I get 
> the error:
> ERROR: dos: reading /dev/mapper/nvidia_bhddebdb[Device or resource busy]
> 
> So I don't know, it seems like this would be a simple fix, but I don't 
> much about C, so just letting you know.  Thanks for the awesome program.
> -ben

Ben,

I had another stride size related report this week and fixed a related bug
which is likely to address your issue as well.
Will get another dmraid release with that fix out next week.


> 
> _______________________________________________
> Ataraid-list mailing list
> Ataraid-list at redhat.com
> https://www.redhat.com/mailman/listinfo/ataraid-list

-- 

Regards,
Heinz    -- The LVM Guy --

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Red Hat GmbH
Consulting Development Engineer                   Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
Mauelshagen at RedHat.com                            +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-