FC5 install and device mapper issue

[hicham]

On 4/12/06, James Olson <big_spender12 at lycos.com> wrote:
> If you boot the FC5 cd and type linux rescue, can you post the output of # dmraid -ay and # fdisk -l /dev/mapper/isw_hgbhgbbcd commands?

The first time I run :
# dmraid -ay  :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
The second time , I get
 # dmraid -ay  :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
RAID set "isw_hgbhgbbcd_Volume01" already active
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume0
Disk /dev/mapper/isw_hgbhgbbcd_Volume0: 161.0 GB, 161061538816 bytes
255 heads, 63 sectors/track, 19581 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

                             Device Boot      Start         End     
Blocks   Id  System
/dev/mapper/isw_hgbhgbbcd_Volume0p1   *           1        5222   
41945683+   7  HPFS/NTFS
/dev/mapper/isw_hgbhgbbcd_Volume0p2            5223       19928  
118125945    f  W95 Ext'd (LBA)
--------------------------------------------------------------------------------------------------------------------------------


On 4/12/06, James Olson <big_spender12 at lycos.com> wrote:
> If you boot the FC5 cd and type linux rescue, can you post the output of # dmraid -ay and # fdisk -l /dev/mapper/isw_hgbhgbbcd commands?

The first time I run :
# dmraid -ay  :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
The second time , I get
 # dmraid -ay  :
RAID set "isw_hgbhgbbcd_Volume0" already active
RAID set "isw_hgbhgbbcd_Volume1" already active
RAID set "isw_hgbhgbbcd_Volume01" already active
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume1
Disk /dev/mapper/isw_hgbhgbbcd_Volume1: 166.7 GB, 166786763776 bytes
255 heads, 63 sectors/track, 20277 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
----------------------------------------------------------------------------------------------------------------------------------
# fdisk -l /dev/mapper/isw_hgbhgbbcd_Volume01

Disk /dev/mapper/isw_hgbhgbbcd_Volume01: 42.9 GB, 42952379904 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

This doesn't look like a partition table
Probably you selected the wrong device.

                              Device Boot      Start         End     
Blocks   Id  System
/dev/mapper/isw_hgbhgbbcd_Volume01p1   ?      119529      232583  
908105142   74  Unknown
Partition 1 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p2   ?      119534      224381  
842184976   70  DiskSecure Multi-Boot
Partition 2 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p3   ?       10497       10497      
    0   72  Unknown
Partition 3 does not end on cylinder boundary.
/dev/mapper/isw_hgbhgbbcd_Volume01p4          160318      160321      
24404    0  Empty
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
-------------------------------------------------------------------------------------------------------------------------------------


note I don't intend to use software raid in fc5 anyway for the moment

hicham