slint and transmission-cli questions

[Linux for blind general discussion]

This is Jude Dashiell,

I'm having problems downloading corrupted torrents and decided to switch 
from lftp to transmission-cli to see if it will make a difference.

On Thu, 3 May 2018, Linux for blind general discussion wrote:

> Date: Thu, 3 May 2018 08:50:58
> From: Linux for blind general discussion <blinux-list at redhat.com>
> To: Linux for blind general discussion <blinux-list at redhat.com>
> Cc: B Watson <yalhcru at gmail.com>
> Subject: Re: slint and transmission-cli questions
> 
> Hello Anonymous;)
>
> I just built and installed transmission, using the SlackBuild from here:
> https://slackbuilds.org/repository/14.2/network/transmission/
> I ran the script directly but could as well have run as root:
> spi -i transmisson
> (to get the package built and installed. By default all parts are built, this includes beyond the cli: GTK, Qt and the daemon.)
>
> Then I issued this command:
> transmission-cli -w /tmp http://www.slackware.com/torrents/slackware
> I get the same errors, however it works
>
> didier[~]$ transmission-cli -w /tmp http://www.slackware.com/torrents/slackware64-14.2-install-dvd.torrent
> transmission-cli 2.93 (3c5870d4f5)
> [2018-05-03 14:39:36.370] Transmission 2.93 (3c5870d4f5) started
> [2018-05-03 14:39:36.371] RPC Server: Adding address to whitelist: 127.0.0.1
> [2018-05-03 14:39:36.371] UDP: Failed to set receive buffer: requested 4194304, got 425984
> [2018-05-03 14:39:36.371] UDP: Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf
> [2018-05-03 14:39:36.371] UDP: Failed to set send buffer: requested 1048576, got 425984
> [2018-05-03 14:39:36.371] UDP: Please add the line "net.core.wmem_max = 1048576" to /etc/sysctl.conf
> [2018-05-03 14:39:36.371] DHT: Reusing old id
> [2018-05-03 14:39:36.372] DHT: Bootstrapping from 44 IPv4 nodes
> [2018-05-03 14:39:36.704] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
> [2018-05-03 14:39:36.704] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
> [2018-05-03 14:39:37.442] Saved "/home/didier/.config/transmission/torrents/slackware64-14.2-iso.85922fbee6dce5e2.torrent"
> [2018-05-03 14:39:38.733] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.0.254:5678/control/wan_ip_connection"
> [2018-05-03 14:39:38.733] Port Forwarding (UPnP): Local Address is "192.168.0.10"
> [2018-05-03 14:39:38.756] Port Forwarding (UPnP): Port forwarding through "http://192.168.0.254:5678/control/wan_ip_connection", service "urn:schemas-upnp-org:service:WANIPConnection:1". (local address: 192.168.0.10:51413)
> [2018-05-03 14:39:38.756] Port Forwarding (UPnP): Port forwarding successful!
> [2018-05-03 14:39:38.756] Port Forwarding: State changed from "Not forwarded" to "Forwarded"
> Progress: 16.7%, dl from 39 of 50 peers[2018-05-03 14:39:56.000] slackware64-14.2-iso: Starting IPv4 DHT announce (poor, 16 nodes)
> Progress: 19.8%, dl from 49 of 50 peers (2.08 MB/s), ul to 0 (0 kB/s) [0.00]
>
> So I don't think you should worry about the errors.
>
> I never used transmission before so can't answer your other question, but I am CCing B. Watson, the transmission SlackBuid maintainer, who certainly knows more.
>
> Le 03/05/2018 ? 13:44, Linux for blind general discussion a ?crit?:
>> Anyone running transmission-cli on slint?? I get a couple errors when it starts up I think I can turn off by disabling port mapping with the -M option.? Apparently transmission-cli expects to be on systemd machines because both error messages want /etc/sysctl.conf to be updated and have lines added to it.? I don't know what to do for system v systems.? Also, I don't know what port mapping would get me if it were enabled as well as disabled.? Transmission-cli runs after these errors though.
>> 
>> 
>> 
>> -- 
>> 
>> _______________________________________________
>> Blinux-list mailing list
>> Blinux-list at redhat.com
>> https://www.redhat.com/mailman/listinfo/blinux-list
>> 
>
> _______________________________________________
> Blinux-list mailing list
> Blinux-list at redhat.com
> https://www.redhat.com/mailman/listinfo/blinux-list

--