[dm-devel] EMC CX LUN problem [SOLVED]
Nicola Murino
n.murino at theorematica.it
Wed Jan 25 19:42:13 UTC 2006
Finally I solved my problem, the gulty was scsi_id, I install CentOS and
scsi_id works as expected reporting different uuid for each lun
this is my final situation:
[root at server1 block]# scsi_id -g -u -s /block/sdb
36006016086f01600bc80c9afbc8dda11
[root at server1 block]# scsi_id -g -u -s /block/sdc
36006016086f01600463513d9978dda11
[root at server1 block]# scsi_id -g -u -s /block/sdd
36006016086f01600bc80c9afbc8dda11
[root at server1 block]# scsi_id -g -u -s /block/sde
36006016086f01600463513d9978dda11
[root at server1 block]# scsi_id -g -u -s /block/sdf
36006016086f01600bc80c9afbc8dda11
[root at server1 block]# scsi_id -g -u -s /block/sdg
36006016086f01600463513d9978dda11
[root at server1 block]# scsi_id -g -u -s /block/sdh
36006016086f01600bc80c9afbc8dda11
[root at server1 block]# scsi_id -g -u -s /block/sdi
36006016086f01600463513d9978dda11
multipath -l
mail (36006016086f01600bc80c9afbc8dda11)
[size=150 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
\_ round-robin 0 [active]
\_ 1:0:1:0 sdd 8:48 [active]
\_ 2:0:1:0 sdh 8:112 [active]
\_ round-robin 0 [enabled]
\_ 1:0:0:0 sdb 8:16 [active]
\_ 2:0:0:0 sdf 8:80 [active]
ql (36006016086f01600463513d9978dda11)
[size=500 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
\_ round-robin 0 [active]
\_ 1:0:1:1 sde 8:64 [active]
\_ 2:0:1:1 sdi 8:128 [active]
\_ round-robin 0 [enabled]
\_ 1:0:0:1 sdc 8:32 [active]
\_ 2:0:0:1 sdg 8:96 [active]
scsi_id is broken in gentoo and ubuntu, at least for this setup infact I
have a working multipath setup using gentoo with some minor difference
in hardware equipment,
thanks to all,
regards
Nicola
Nicola Murino ha scritto:
> Brian Wong ha scritto:
>> On Tue, 2006-01-24 at 22:31 +0100, Nicola Murino wrote:
>>
>>> Hi,
>>>
>>> I'm trying to configure a new emc cx storage, I have the following:
>>>
>>> 2 server, each server has a qla2462 dual port hba
>>> each qla2462 is connected to a switch (only one switch)
>>> 1 emc cx storage with 4 path connected to the switch
>>>
>>> I defined two lun on the storage however I'm able to see only one LUN
>>>
>>> multipath -l show the following:
>>>
>>> multipath -l
>>> mail (36006016086f01600e46f567adb8cda11)
>>> [size=150 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
>>> \_ round-robin 0 [active]
>>> \_ 1:0:1:0 sdd 8:48 [active][ready]
>>> \_ 1:0:1:1 sde 8:64 [active][ready]
>>> \_ 2:0:1:0 sdh 8:112 [active][ready]
>>> \_ 2:0:1:1 sdi 8:128 [active][ready]
>>> \_ round-robin 0 [enabled]
>>> \_ 2:0:0:0 sdf 8:80 [active][ready]
>>> \_ 1:0:0:0 sdb 8:16 [active][ready]
>>> \_ 1:0:0:1 sdc 8:32 [active][ready]
>>> \_ 2:0:0:1 sdg 8:96 [active][ready]
>>>
>>>
>>
>> i could be off in the weeds here, but this output looks wrong. the
>> host:channel:target:lun numbers listed there suggest your cx is indeed
>> surfacing luns 0 and 1, but multipath is grouping them under a single
>> target ID.
>>
>>
> Maybe you are right! I added another LUN and this is multipath output
>
> multipath -l
> mail (36006016086f01600e46f567adb8cda11)
> [size=150 GB][features="1 queue_if_no_path"][hwhandler="1 emc"]
> \_ round-robin 0 [active]
> \_ 2:0:0:0 sdh 8:112 [active][ready]
> \_ 1:0:0:0 sdb 8:16 [active][ready]
> \_ 1:0:0:1 sdc 8:32 [active][ready]
> \_ 1:0:0:2 sdd 8:48 [active][ready]
> \_ 2:0:0:1 sdi 8:128 [active][ready]
> \_ 2:0:0:2 sdj 8:144 [active][ready]
> \_ round-robin 0 [enabled]
> \_ 1:0:1:0 sde 8:64 [active][ready]
> \_ 1:0:1:1 sdf 8:80 [active][ready]
> \_ 1:0:1:2 sdg 8:96 [active][ready]
> \_ 2:0:1:0 sdk 8:160 [active][ready]
> \_ 2:0:1:1 sdl 8:176 [active][ready]
> \_ 2:0:1:2 sdm 8:192 [active][ready]
>
>
>> i think emc engineers monitor this list; perhaps they can help.
>>
> maybe the problem is scsi_id that report the same output for all block
> device,
>
> I have kernel 2.6.16-rc1 on a server and 2.6.13.5 on the other one,
>
> with 2.6.16-rc1
>
> lsmod
> Module Size Used by
> dm_round_robin 3840 1
> dm_emc 5760 1
> dm_multipath 18696 3 dm_round_robin,dm_emc
> qla2400 200448 0
> qla2xxx 116964 25 qla2400
>
> with 2.6.13.5
>
>
> root at server1:/home/admin# lsmod
> Module Size Used by
> ehci_hcd 29576 0
> uhci_hcd 30864 0
> usbcore 104828 3 ehci_hcd,uhci_hcd
> dm_round_robin 3712 1
> dm_emc 5632 1
> dm_multipath 18312 3 dm_round_robin,dm_emc
> qla2xxx 110044 12
> firmware_class 8448 1 qla2xxx
>
>
> hba controller are qlogic2462
>
> thanks
> Nicola
>
>
>
>> also, look at this if you havent already (there's a section on clariion
>> cx's), and feel free to add your findings.
>>
>> http://christophe.varoqui.free.fr/wiki/wakka.php?wiki=TestedEnvironments
>>
>> hope that helps,
>>
>> brian
>>
>>
>> --
>> dm-devel mailing list
>> dm-devel at redhat.com
>> https://www.redhat.com/mailman/listinfo/dm-devel
>>
>>
>
> --
> dm-devel mailing list
> dm-devel at redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
>
More information about the dm-devel
mailing list