Fw: [dm-devel] Multipath and SAN Fabric failover
John Little
jslittl at hendricks.org
Thu Sep 14 12:08:41 UTC 2006
dm-devel-bounces at redhat.com wrote on 09/10/2006 03:23:55 PM:
> Heya,
> > Just to make sure that I've covered everything I partitioned the
> > disk as /dev/sdc and then used lvm2 command:
> >
> sorry, I've missed that before. /dev/sdc is only _one_ of your paths
> to a LUN. multipath will take the right 2 of those sd* to create one
> dm device file. Have a look if there's somethign in /dev/mapper, also
> check your udev rules, you need this line in there:
>
> KERNEL=="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k",
> SYMLINK="%c"
>
> most distros have a line like
> #KERNEL=="dm-[0-9]*", NAME=""
> in there, you need to comment it out if you add the lien above.
>
>
> Hope that helped,
>
> best regards
>
> Bernd Zeimetz
Bernd,
I haven't had a chance to work on this for a couple of days but I did
get do some reading. I'm wondering if I'm using the correct driver for
this. I have been trying to use the QLogic driver shipped with SLES.
Should I be using the non-EMC driver from the Qlogic website?
Regards,
John
More information about the dm-devel
mailing list