[dm-devel] Multipath blacklist exceptions issues
Benjamin Marzinski
bmarzins at redhat.com
Tue Nov 13 21:21:59 UTC 2007
On Sat, Nov 10, 2007 at 02:17:45AM +0100, Christophe Varoqui wrote:
> Indeed the current situation is fishy. Ben pointed a true braino in the
> code I introduced when restructuring the blacklist lib :
>
> in _filter_path(), I test each _filter_*() for r!=0 , where I intented
> to check for r>0.
>
> r==0 implements : "exit on first blacklist or exception match".
> r>0 implements : "exit on first blacklist match".
>
> With this later behaviour I can set things like that for max safety and
> efficiency :
>
> blacklist {
> devnode .*
> device {
> vendor .*
> product .*
> }
> wwid .*
> }
> blacklist_exceptions {
> devnode sd.*
> device {
> vendor IET.*
> product .*
> }
> wwid "1646561646265.*"
> }
>
> or pragmatically :
>
> blacklist {
> devnode .*
> wwid .*
> }
> blacklist_exceptions {
> devnode sd.*
> wwid "1646561646265.*"
> }
>
>
>
> Working that out, I also realized there may be another small
> misbehaviour :
>
> First, a little background on path discovery operations :
>
> 1) /sys/block parsing shows devnode names
> 2) devnode names examination shows device identification strings
> 3) these strings help us choose a getuid helper, which finally shows
> wwids
>
> Meaning we want the devnode blacklisting to prevail over device and
> wwid, in case we know we don't have device strings available (loop, dm-,
> raw, ...)
>
> Similarily, we want the device blacklist to prevail over wwid, in case
> we know we don't have getuid callout available. I have no example for
> this case though, so it shouldn't be as important as the previous one.
>
> Problem is we challenge _filter_device() after _filter_wwid().
> This can be easily shufled around.
>
>
> So, I submit this (attached) patch to your review.
Looks fine to me.
-Ben
> regards,
> cvaroqui
>
>
> Le samedi 10 novembre 2007 à 00:20 +0100, Stefan Bader a écrit :
> >
> >
> > Any thoughts on this? Good Idea? Worth doing?
> >
> > To be honest, I do not see the real simplification in that many
> > changes. Spreading black- and/or white-lists over so many places seems
> > rather confusion to me. I agree that using devnode names is not ideal
> > for the reasons you mentioned. That was done mainly to have an
> > internal blacklist of known devices that are known not to work.
> > Potentially this could be a device type (= driver name?). But would
> > this not also be possible as a new element of the blacklist? E.g.:
> >
> > blacklist {
> > driver fd
> > driver device-mapper
> > ...
> > }
> >
> > The problem with the current implementation, in my thinking, is that
> > we have a dependency between two sections (blacklist and
> > blacklist_exceptions) and the keywords within. Without reading any
> > further
> > documentation it seems awkward that it is not possible to blacklist
> > device nodes and punch holes by certain wwid numbers. When I think
> > about it, I guess (any other opinions welcome) that a exception is
> > what is really intended to be used. So that should always have more
> > priority than a blacklist. So if the filter finds a matching entry in
> > the blacklist_exceptions section, the device should be used.
> >
> > So my proposal would be:
> >
> > 1. process the blacklist_exceptions (any match enables the device)
> > 2. process the blacklist
> > 3. any device dropping through is also used.
> >
> > Additionally I like the idea of a match-by-driver extension.
> >
> > Stefan
> diff --git a/libmultipath/blacklist.c b/libmultipath/blacklist.c
> index 9a058f7..6297516 100644
> --- a/libmultipath/blacklist.c
> +++ b/libmultipath/blacklist.c
> @@ -297,16 +297,14 @@ _filter_path (struct config * conf, struct path * pp)
> int r;
>
> r = _filter_devnode(conf->blist_devnode, conf->elist_devnode,pp->dev);
> - if (r)
> - return r;
> - r = _filter_wwid(conf->blist_wwid, conf->elist_wwid, pp->wwid);
> - if (r)
> + if (r > 0)
> return r;
> r = _filter_device(conf->blist_device, conf->elist_device,
> pp->vendor_id, pp->product_id);
> - if (r)
> + if (r > 0)
> return r;
> - return 0;
> + r = _filter_wwid(conf->blist_wwid, conf->elist_wwid, pp->wwid);
> + return r;
> }
>
> int
More information about the dm-devel
mailing list