[dm-devel] [PATCH 6/9] scsi_dh: add hp sw device handler
Chandra Seetharaman
sekharan at us.ibm.com
Thu Jan 24 00:31:47 UTC 2008
Subject: scsi_dh: add hp sw device handler
From: Mike Christie <michaelc at cs.wisc.edu>
This patch adds a very basic scsi device handler for older hp boxes which
cannot be upgraded.
Signed-off-by: Mike Christie <michaelc at cs.wisc.edu>
Signed-off-by: Chandra Seetharaman <sekharan at us.ibm.com>
---
drivers/scsi/device_handler/Kconfig | 6 6 + 0 - 0 !
drivers/scsi/device_handler/Makefile | 1 1 + 0 - 0 !
drivers/scsi/device_handler/scsi_dh_hp_sw.c | 206 206 + 0 - 0 !
3 files changed, 213 insertions(+)
Index: linux-2.6.24-rc8/drivers/scsi/device_handler/Kconfig
===================================================================
--- linux-2.6.24-rc8.orig/drivers/scsi/device_handler/Kconfig
+++ linux-2.6.24-rc8/drivers/scsi/device_handler/Kconfig
@@ -18,5 +18,11 @@ config SCSI_DH_EMC
help
If you have a EMC CLARiiON select y. Otherwise, say N.
+config SCSI_DH_HP_SW
+ tristate "HP/COMPAQ MSA Device Handler"
+ help
+ If you have a HP/COMPAQ MSA device that requires START_STOP to
+ be sent to start it and cannot upgrade the firmware then select y.
+ Otherwise, say N.
endif #SCSI_DH
Index: linux-2.6.24-rc8/drivers/scsi/device_handler/Makefile
===================================================================
--- linux-2.6.24-rc8.orig/drivers/scsi/device_handler/Makefile
+++ linux-2.6.24-rc8/drivers/scsi/device_handler/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_SCSI_DH_EMC) += scsi_dh_emc.o
+obj-$(CONFIG_SCSI_DH_HP_SW) += scsi_dh_hp_sw.o
Index: linux-2.6.24-rc8/drivers/scsi/device_handler/scsi_dh_hp_sw.c
===================================================================
--- /dev/null
+++ linux-2.6.24-rc8/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -0,0 +1,206 @@
+/*
+ * Basic HP/COMPAQ MSA 1000 support. This is only needed if your HW cannot be
+ * upgraded.
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2006 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/blkdev.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_driver.h>
+
+#define HP_SW_NAME "hp_sw"
+
+#define HP_SW_TIMEOUT 30
+#define HP_SW_RETRIES 3
+
+struct hp_sw_dh_data {
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+ int retries;
+};
+
+static void hp_sw_done(struct request *req, int uptodate)
+{
+ struct request *act_req = req->end_io_data;
+ struct request_queue *q = req->q;
+ struct scsi_device *sdev = q->queuedata;
+ struct hp_sw_dh_data *hp_sw_dh_data = sdev->sdev_dh_data;
+ struct scsi_sense_hdr sshdr;
+ int rc = BLKERR_OK;
+
+ sdev_printk(KERN_INFO, sdev, "hp_sw_done %d\n", req->errors);
+
+ /*
+ * This will at least get us going. Let Dave do the details.
+ */
+ if (status_byte(req->errors) == CHECK_CONDITION &&
+ scsi_normalize_sense(req->sense, req->sense_len, &sshdr)) {
+ /* tmp debug output */
+ __scsi_print_sense("hp_sw_done", req->sense, req->sense_len);
+
+ switch (sshdr.sense_key) {
+ case NOT_READY:
+ if ((sshdr.asc == 0x04) && (sshdr.ascq == 3)) {
+ rc = BLKERR_RETRY;
+ hp_sw_dh_data->retries++;
+ break;
+ }
+ /* fall through */
+ default:
+ hp_sw_dh_data->retries++;
+ rc = BLKERR_IMM_RETRY;
+ }
+ } else if (req->errors)
+ rc = BLKERR_IO;
+
+ if (rc == BLKERR_OK)
+ hp_sw_dh_data->retries = 0;
+ else if (hp_sw_dh_data->retries > HP_SW_RETRIES) {
+ hp_sw_dh_data->retries = 0;
+ rc = BLKERR_IO;
+ }
+
+ __blk_put_request(req->q, req);
+ scsi_blk_linux_cmd_done(act_req, rc);
+}
+
+static void hp_sw_transition(struct request *act_req)
+{
+ struct scsi_device *sdev = act_req->q->queuedata;
+ struct hp_sw_dh_data *hp_sw_dh_data = sdev->sdev_dh_data;
+ struct request *req;
+
+ sdev_printk(KERN_INFO, sdev, "hp_sw_done send START_STOP retries %d.\n",
+ act_req->retries);
+
+ req = blk_get_request(sdev->request_queue, 0, GFP_ATOMIC);
+ if (!req) {
+ scsi_blk_linux_cmd_done(req, BLKERR_RES_TEMP_UNAVAIL);
+ return;
+ }
+
+ req->cmd_type = REQ_TYPE_BLOCK_PC;
+ req->cmd_flags |= REQ_FAILFAST;
+ req->cmd_len = COMMAND_SIZE(START_STOP);
+ memset(req->cmd, 0, MAX_COMMAND_SIZE);
+ req->cmd[0] = START_STOP;
+ req->cmd[4] = 1; /* Start spin cycle */
+ req->timeout = HP_SW_TIMEOUT;
+ req->retries = HP_SW_RETRIES;
+ req->end_io_data = act_req;
+ req->sense = hp_sw_dh_data->sense;
+ memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
+ req->sense_len = 0;
+
+ blk_execute_rq_nowait(req->q, NULL, req, 1, hp_sw_done);
+}
+
+static const struct {
+ char *vendor;
+ char *model;
+} hp_sw_dh_data_list[] = {
+ {"COMPAQ", "MSA1000"},
+ {"HP", "HSV100"},
+ {NULL, NULL},
+};
+
+static int hp_sw_bus_notify(struct notifier_block *, unsigned long, void *);
+
+static struct scsi_device_handler hp_sw_dh = {
+ .name = HP_SW_NAME,
+ .module = THIS_MODULE,
+ .nb.notifier_call = hp_sw_bus_notify,
+ .transition = hp_sw_transition,
+};
+
+static int hp_sw_bus_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct hp_sw_dh_data *dh_data;
+ int i, found = 0;
+ unsigned long flags;
+
+ if (action == BUS_NOTIFY_ADD_DEVICE) {
+ for (i = 0; hp_sw_dh_data_list[i].vendor; i++) {
+ if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor,
+ strlen(hp_sw_dh_data_list[i].vendor)) &&
+ !strncmp(sdev->model, hp_sw_dh_data_list[i].model,
+ strlen(hp_sw_dh_data_list[i].model))) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found)
+ goto out;
+
+ dh_data = kzalloc(sizeof(*dh_data), GFP_KERNEL);
+ if (!dh_data) {
+ sdev_printk(KERN_ERR, sdev, "Attach Failed %s.\n",
+ HP_SW_NAME);
+ goto out;
+ }
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ sdev->sdev_dh_data = dh_data;
+ sdev->sdev_dh = &hp_sw_dh;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+ sdev_printk(KERN_NOTICE, sdev, "Attached %s.\n",
+ HP_SW_NAME);
+ } else if (action == BUS_NOTIFY_DEL_DEVICE) {
+ if (sdev->sdev_dh != &hp_sw_dh)
+ goto out;
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
+ dh_data = sdev->sdev_dh_data;
+ sdev->sdev_dh_data = NULL;
+ sdev->sdev_dh = NULL;
+ spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+
+ sdev_printk(KERN_NOTICE, sdev, "Dettached %s.\n",
+ HP_SW_NAME);
+
+ kfree(dh_data);
+ }
+
+out:
+ return 0;
+}
+
+static int __init hp_sw_init(void)
+{
+ return scsi_register_device_handler(&hp_sw_dh);
+}
+
+static void __exit hp_sw_exit(void)
+{
+ scsi_unregister_device_handler(&hp_sw_dh);
+}
+
+module_init(hp_sw_init);
+module_exit(hp_sw_exit);
+
+MODULE_DESCRIPTION("HP MSA 1000");
+MODULE_AUTHOR("Mike Christie <michaelc at cs.wisc.edu");
+MODULE_LICENSE("GPL");
--
----------------------------------------------------------------------
Chandra Seetharaman | Be careful what you choose....
- sekharan at us.ibm.com | .......you may get it.
----------------------------------------------------------------------
More information about the dm-devel
mailing list