[dm-devel] Using different configuration for arrays with identical vendor/product
Tore Anderson
tore at linpro.no
Fri Mar 28 11:23:30 UTC 2008
Hey. I've got an EMC CX200 and a CX3-40 in my SAN. The latter one
supports ALUA, which I'm using as much as I can, the former does not.
The hosts need to be able to access volumes on both the arrays at the
same time.
Unfortunately the volumes on both of these boxes have vendor «DGC» and
product «RAID 5», so making two different device sections for them with
different hardware_handler and path_checker settings isn't trivial. I
figured I could simply override the two settings in the multipath{}
blocks for volumes on the CX200, making the device{} block specific for
the CX3-40. Doesn't appear to work, though, the path_checker- and
hardware_handler-settings in the multipath{} blocks appears to be
silently ignored.
Am I out of luck or is there any other way to do what I want?
For reference, this is the device section I use for the CX200 in
standard «trespassing» mode:
device {
vendor DGC.*
product RAID.*
hardware_handler "1 emc"
path_checker emc_clariion
prio_callout "/sbin/mpath_prio_emc /dev/%n"
features "1 queue_if_no_path"
path_grouping_policy group_by_prio
failback immediate
}
And for the CX3-40 in ALUA mode:
device {
vendor DGC.*
product RAID.*
hardware_handler "0"
path_checker tur
prio_callout "/sbin/mpath_prio_emc /dev/%n"
features "1 queue_if_no_path"
path_grouping_policy group_by_prio
failback immediate
}
These both work fine on hosts that only connect to one of the arrays at
a time.
Regards
--
Tore Anderson
More information about the dm-devel
mailing list