[dm-devel] failover does not work with rdac device handler

Moger, Babu Babu.Moger at lsi.com
Mon Oct 6 22:26:54 UTC 2008 

Hi Chandra,

Please note that failover works fine if I add vendor and model ids("LSI", "INF-01-00")in rdac_dev_list(in the file scsi_dh_rdac.c).

Thanks
Babu Moger

-----Original Message-----
From: dm-devel-bounces at redhat.com [mailto:dm-devel-bounces at redhat.com] On Behalf Of Moger, Babu
Sent: Monday, October 06, 2008 3:00 PM
To: sekharan at us.ibm.com
Cc: device-mapper development; linux-scsi at vger.kernel.org
Subject: RE: [dm-devel] failover does not work with rdac device handler


I have configured two Luns.


# lsmod | grep scsi_dh_rdac
scsi_dh_rdac           39044  8
scsi_dh                40068  2 scsi_dh_rdac,dm_multipath
scsi_mod              188920  9 scsi_dh_rdac,scsi_dh,sg,lpfc,qla2xxx,scsi_transport_fc,libata,megaraid_sas,sd_mod


Here is the complete output.

# multipath -ll

mpath2 (3600a0b80000f6a7d000080454714d058) dm-2 LSI,INF-01-00
[size=10G][features=1 queue_if_no_path][hwhandler=1 rdac][rw]
\_ round-robin 0 [prio=6][active]
 \_ 3:0:0:2 sdf 8:80  [active][ready]
 \_ 3:0:2:2 sdl 8:176 [active][ready]
\_ round-robin 0 [prio=0][enabled]
 \_ 3:0:1:2 sdi 8:128 [active][ghost]
 \_ 3:0:3:2 sdo 8:224 [active][ghost]

mpath3 (3600a0b80000f519c00007e034714d159) dm-3 LSI,INF-01-00
[size=10G][features=1 queue_if_no_path][hwhandler=1 rdac][rw]
\_ round-robin 0 [prio=6][active]
 \_ 3:0:1:3 sdj 8:144 [active][ready]
 \_ 3:0:3:3 sdp 8:240 [active][ready]
\_ round-robin 0 [prio=0][enabled]
 \_ 3:0:0:3 sdg 8:96  [active][ghost]
 \_ 3:0:2:3 sdm 8:192 [active][ghost]


Thanks
Babu Moger

-----Original Message-----
From: Chandra Seetharaman [mailto:sekharan at us.ibm.com]
Sent: Monday, October 06, 2008 2:54 PM
To: Moger, Babu
Cc: device-mapper development; linux-scsi at vger.kernel.org
Subject: RE: [dm-devel] failover does not work with rdac device handler

Is this the only rdac device that is present ?

Can you also get me the o/p of "lsmod | grep scsi_dh_rdac" (just wanted
to make sure if each (SCSI) device has a module.

On Mon, 2008-10-06 at 13:26 -0600, Moger, Babu wrote:
> Hi Chandra,
>
> All the dh_state values show "rdac".  I have cut pasted the output below.
>
> I am seeing the following error messages when I tried to failover.
>
>         Oct  6 13:50:01 localhost multipathd: 8:96: reinstated
>         Oct  6 13:50:01 localhost kernel: device-mapper: multipath: Cannot              failover device because scsi_dh_rdac was not loaded.
>         Oct  6 13:50:01 localhost kernel: device-mapper: multipath: Failing             path 8:96.
>         Oct  6 13:50:01 localhost kernel: device-mapper: multipath: Could not           failover device. Error 15.
>         Oct  6 13:50:01 localhost multipathd: 8:96: mark as failed
>
>
> Output of # multipath -ll
>
>         mpath2 (3600a0b80000f6a7d000080454714d058) dm-2 LSI,INF-01-00
>         [size=10G][features=1 queue_if_no_path][hwhandler=1 rdac][rw]
>         \_ round-robin 0 [prio=6][active]
>          \_ 3:0:0:2 sdf 8:80  [active][ready]
>          \_ 3:0:2:2 sdl 8:176 [active][ready]
>         \_ round-robin 0 [prio=0][enabled]
>          \_ 3:0:1:2 sdi 8:128 [active][ghost]
>          \_ 3:0:3:2 sdo 8:224 [active][ghost]
>
>
> dh_state values.
>
>         #cat /sys/block/sdf/device/dh_state
>         rdac
>
>         #cat /sys/block/sdl/device/dh_state
>         rdac
>
>         #cat /sys/block/sdi/device/dh_state
>         rdac
>
>         # cat /sys/block/sdo/device/dh_state
>         rdac
>
>  Please let me know what you think.
>  Note (Kernel version 2.6.27-rc7 and multipath-tools v0.4.8)
>
> Thanks
> Babu Moger
>
> -----Original Message-----
> From: Moger, Babu
> Sent: Friday, October 03, 2008 10:35 PM
> To: sekharan at us.ibm.com
> Cc: device-mapper development; linux-scsi at vger.kernel.org
> Subject: RE: [dm-devel] failover does not work with rdac device handler
>
> Thanks Chandra for the response..
>
> That is the good news. So, we do not have to change the kernel  code everytime we want to support the new product.
>
> I will do the steps you mentioned first thing on Monday and reply your back.
>
> Thanks
> Babu Moger
>
> ________________________________________
> From: Chandra Seetharaman [sekharan at us.ibm.com]
> Sent: Friday, October 03, 2008 7:50 PM
> To: Moger, Babu
> Cc: device-mapper development; linux-scsi at vger.kernel.org
> Subject: Re: [dm-devel] failover does not work with rdac device handler
>
> It is supposed to work. I will look into it and respond.
>
> Can you try one thing
>
> for all your devices, do
>         echo rdac > /sys/block/sd?/dh_state
>
> (first you can read the files and see if they all show rdac or not)
>
> and then do your fail over. Let me know what happens.
>
> chandra
> On Fri, 2008-10-03 at 18:12 -0600, Moger, Babu wrote:
> > Hi,
> >
> > I have quick question.
> >
> > I am trying to configure device mapper for my FC array (on my Linux box). I have passed all the arguments from /etc/multipath.conf(like vendor, model etc ..).
> >
> > Discovery seems fine. But, failover is not working.  I am seeing the following error.
> >
> > "device-mapper: multipath: Cannot failover device because scsi_dh_rdac was not loaded."
> >
> > Is it required to add vendor id and model id anywhere else to support this device?
> >
> > Thanks
> > Babu Moger
> >
> >
> > -----Original Message-----
> > From: dm-devel-bounces at redhat.com [mailto:dm-devel-bounces at redhat.com] On Behalf Of Moger, Babu
> > Sent: Wednesday, October 01, 2008 4:48 PM
> > To: device-mapper development; linux-scsi at vger.kernel.org
> > Subject: [dm-devel] failover does not work with rdac device handler
> >
> > Hi All,
> >
> > I am new to the device mapper and just thought I will set-up device mapper on our arrays. I am using the latest kernel 2.6.27.rc6 and got the latest multipath-tools from upstream.
> >
> > I updated /etc/multipath.conf with all the information (vendor, product, hardware_handler, prio etc  ...). Note that my device is not part of rdac_dev_list.
> >
> > Discovery worked fine. "multipath -ll" displays all the information. I can see that it is picking up rdac device handler.
> >
> > But I found that for some reason failover/failback is not working.  I am seeing following these messages.
> >
> > "device-mapper: multipath: Cannot failover device because scsi_dh_rdac was not loaded."
> >
> > I can see that scsi_dh_rdac driver is already loaded.
> >
> > I did some more investigation. Found that failover works fine if I add vendor, model in rdac_dev_list (in file scsi_dh_rdac.c).
> >
> > My question - is it required to add all the supported vendor and model names in rdac_dev_list?
> >
> > Appreciate your responses.
> >
> > Thanks
> > Babu Moger
> >
> >
> >
> >
> >
> >
> >
> > --
> > dm-devel mailing list
> > dm-devel at redhat.com
> > https://www.redhat.com/mailman/listinfo/dm-devel
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
dm-devel mailing list
dm-devel at redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel

More information about the dm-devel mailing list