[dm-devel] i/o error due to all path failure with rdac
Chandra Seetharaman
sekharan at us.ibm.com
Thu Oct 30 18:56:35 UTC 2008
Hi Babu,
As Mike asked, can you provide the kernel version and the multipath
version.
Can you also provide the var/log/messages file from the start (before
you fail the first path) to the finish of your test.
Also, what kind of I/Os are you running.
BTW, if it is mainline code, can you apply the attached patch and see if
you see any better behavior.
regards,
chandra
On Fri, 2008-10-24 at 17:11 -0600, Moger, Babu wrote:
> Hi,
>
> I am running an online/offline test. I have two paths to the controller. One is active and one is passive. When I fail (offline) the active path (sde 8:64), the Device mapper is failing passive path(sdf 8:80) as well leading to all path failure. Any ideas or hints?
>
> Here is output multipath -ll. I have only one lun.
>
> [root at localhost ~]# multipath -ll
> mpathie (3600a0b80000f6a7d0000cff048fed59c) dm-2 LSI,INF-01-00
> [size=10G][features=1 queue_if_no_path][hwhandler=1 rdac][rw]
> \_ round-robin 0 [prio=2][enabled]
> \_ 3:0:0:0 sde 8:64 [active][undef]
> \_ round-robin 0 [prio=1][enabled]
> \_ 3:0:1:0 sdf 8:80 [active][undef]
>
>
> Here is the detailed log.
>
> Oct 24 16:50:50 localhost multipathd: sdf: rdac prio = 0
> Oct 24 16:51:06 localhost kernel: sd 3:0:0:0: [sde] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK
> Oct 24 16:51:06 localhost kernel: end_request: I/O error, dev sde, sector 1047072
> Oct 24 16:51:06 localhost kernel: device-mapper: multipath: Failing path 8:64.
> Oct 24 16:51:06 localhost multipathd: mpathie: rr_weight = 2 (controller setting)
> Oct 24 16:51:06 localhost multipathd: mpathie: pgfailback = 100 (controller setting)
> Oct 24 16:51:06 localhost multipathd: mpathie: no_path_retry = 10 (controller setting)
> Oct 24 16:51:06 localhost multipathd: pg_timeout = NONE (internal default)
> Oct 24 16:51:06 localhost multipathd: 8:64: mark as failed
> Oct 24 16:51:06 localhost multipathd: uevent 'change' from '/block/dm-2'
> Oct 24 16:51:06 localhost multipathd: UDEV_LOG=3
> Oct 24 16:51:06 localhost multipathd: ACTION=change
> Oct 24 16:51:06 localhost multipathd: DEVPATH=/block/dm-2
> Oct 24 16:51:06 localhost multipathd: SUBSYSTEM=block
> Oct 24 16:51:06 localhost multipathd: DM_TARGET=multipath
> Oct 24 16:51:06 localhost multipathd: DM_ACTION=PATH_FAILED
> Oct 24 16:51:06 localhost multipathd: DM_SEQNUM=1
> Oct 24 16:51:06 localhost multipathd: DM_PATH=8:64
> Oct 24 16:51:06 localhost multipathd: DM_NR_VALID_PATHS=1
> Oct 24 16:51:06 localhost multipathd: DM_NAME=mpathie
> Oct 24 16:51:06 localhost multipathd: DM_UUID=mpath-3600a0b80000f6a7d0000cff048fed59c
> Oct 24 16:51:06 localhost multipathd: MAJOR=253
> Oct 24 16:51:06 localhost multipathd: MINOR=2
> Oct 24 16:51:06 localhost multipathd: DEVTYPE=disk
> Oct 24 16:51:06 localhost multipathd: SEQNUM=1254
> Oct 24 16:51:06 localhost multipathd: UDEVD_EVENT=1
> Oct 24 16:51:06 localhost multipathd: dm-2: add map (uevent)
> Oct 24 16:51:08 localhost kernel: device-mapper: multipath: Failing path 8:80.
> Oct 24 16:51:08 localhost multipathd: mpathie: devmap event #3
> Oct 24 16:51:08 localhost multipathd: mpathie: discover
> Oct 24 16:51:08 localhost multipathd: mpathie: rr_weight = 2 (controller setting)
> Oct 24 16:51:08 localhost multipathd: mpathie: pgfailback = 100 (controller setting)
> Oct 24 16:51:08 localhost multipathd: mpathie: no_path_retry = 10 (controller setting)
> Oct 24 16:51:08 localhost multipathd: pg_timeout = NONE (internal default)
> Oct 24 16:51:08 localhost multipathd: 8:80: mark as failed
> Oct 24 16:51:08 localhost multipathd: mpathie: Entering recovery mode: max_retries=10
> Oct 24 16:51:08 localhost multipathd: uevent 'change' from '/block/dm-2'
> Oct 24 16:51:08 localhost multipathd: UDEV_LOG=3
> Oct 24 16:51:08 localhost multipathd: ACTION=change
> Oct 24 16:51:08 localhost multipathd: DEVPATH=/block/dm-2
> Oct 24 16:51:08 localhost multipathd: SUBSYSTEM=block
> Oct 24 16:51:08 localhost multipathd: DM_TARGET=multipath
> Oct 24 16:51:08 localhost multipathd: DM_ACTION=PATH_FAILED
> Oct 24 16:51:08 localhost multipathd: DM_SEQNUM=2
> Oct 24 16:51:08 localhost multipathd: DM_PATH=8:80
> Oct 24 16:51:08 localhost multipathd: DM_NR_VALID_PATHS=0
> Oct 24 16:51:08 localhost multipathd: DM_NAME=mpathie
> Oct 24 16:51:08 localhost multipathd: DM_UUID=mpath-3600a0b80000f6a7d0000cff048fed59c
> Oct 24 16:51:08 localhost multipathd: MAJOR=253
> Oct 24 16:51:08 localhost multipathd: MINOR=2
> Oct 24 16:51:08 localhost multipathd: DEVTYPE=disk
> Oct 24 16:51:08 localhost multipathd: SEQNUM=1255
> Oct 24 16:51:08 localhost multipathd: UDEVD_EVENT=1
> Oct 24 16:51:08 localhost multipathd: dm-2: add map (uevent)
> Oct 24 16:51:36 localhost kernel: rport-3:0-2: blocked FC remote port time out: removing target and saving binding
> Oct 24 16:51:36 localhost multipathd: sde: rdac checker reports path is down
> Oct 24 16:51:36 localhost multipathd: sde: mask = 0x8
> Oct 24 16:51:36 localhost kernel: sd 3:0:0:0: [sde] Synchronizing SCSI cache
> Oct 24 16:51:36 localhost kernel: sd 3:0:0:0: [sde] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> Oct 24 16:51:36 localhost kernel: scsi 3:0:0:0: rdac: Detached
> Oct 24 16:51:36 localhost multipathd: uevent 'remove' from '/class/scsi_generic/sg5'
> Oct 24 16:51:36 localhost multipathd: UDEV_LOG=3
> Oct 24 16:51:36 localhost multipathd: ACTION=remove
> Oct 24 16:51:36 localhost multipathd: DEVPATH=/class/scsi_generic/sg5
> Oct 24 16:51:36 localhost multipathd: SUBSYSTEM=scsi_generic
> Oct 24 16:51:36 localhost multipathd: MAJOR=21
> Oct 24 16:51:36 localhost multipathd: MINOR=5
> Oct 24 16:51:36 localhost multipathd: PHYSDEVPATH=/devices/pci0000:00/0000:00:02.0/0000:06:00.3/0000:0b:01.0/host3/rport-3:0-2/target3:0:0/3:0:0:0
> Oct 24 16:51:36 localhost multipathd: PHYSDEVBUS=scsi
> Oct 24 16:51:36 localhost multipathd: PHYSDEVDRIVER=sd
> Oct 24 16:51:36 localhost multipathd: SEQNUM=1256
> Oct 24 16:51:36 localhost multipathd: UDEVD_EVENT=1
> Oct 24 16:51:36 localhost multipathd: DEVNAME=/dev/sg5
> Oct 24 16:51:36 localhost multipathd: uevent 'remove' from '/class/scsi_device/3:0:0:0'
> Oct 24 16:51:36 localhost multipathd: UDEV_LOG=3
> Oct 24 16:51:36 localhost kernel: device-mapper: multipath: Failing path 8:80.
> Oct 24 16:51:36 localhost multipathd: ACTION=remove
> Oct 24 16:51:36 localhost UnixSmash4[9200]: 7:UnixSmash has experienced a write failure.
>
> Thanks
> Babu Moger
>
>
> --
> dm-devel mailing list
> dm-devel at redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
-------------- next part --------------
Retry mode select.
Signed-off-by: Chandra Seetharaman <sekharan at us.ibm.com>
Index: linux-2.6.27/drivers/scsi/device_handler/scsi_dh_rdac.c
===================================================================
--- linux-2.6.27.orig/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ linux-2.6.27/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -24,6 +24,7 @@
#include <scsi/scsi_dh.h>
#define RDAC_NAME "rdac"
+#define RDAC_RETRY_COUNT 5
/*
* LSI mode page stuff
@@ -476,21 +477,27 @@ static int send_mode_select(struct scsi_
{
struct request *rq;
struct request_queue *q = sdev->request_queue;
- int err = SCSI_DH_RES_TEMP_UNAVAIL;
+ int err, retry_cnt = RDAC_RETRY_COUNT;
+retry:
+ err = SCSI_DH_RES_TEMP_UNAVAIL;
rq = rdac_failover_get(sdev, h);
if (!rq)
goto done;
- sdev_printk(KERN_INFO, sdev, "queueing MODE_SELECT command.\n");
+ sdev_printk(KERN_INFO, sdev, "%s MODE_SELECT command.\n",
+ (retry_cnt == RDAC_RETRY_COUNT) ? "queueing" : "retrying");
err = blk_execute_rq(q, NULL, rq, 1);
- if (err != SCSI_DH_OK)
+ blk_put_request(rq);
+ if (err != SCSI_DH_OK) {
err = mode_select_handle_sense(sdev, h->sense);
+ if (err == SCSI_DH_RETRY && retry_cnt--)
+ goto retry;
+ }
if (err == SCSI_DH_OK)
h->state = RDAC_STATE_ACTIVE;
- blk_put_request(rq);
done:
return err;
}
More information about the dm-devel
mailing list