[dm-devel] Poor iSCSI performance
John A. Sullivan III
jsullivan at opensourcedevel.com
Mon Mar 16 09:57:44 UTC 2009
Hello, all. We've been struggling to tweak performance between on Linux
iSCSI initiators (open-iscsi) and our opensolar iSCSI targets (Nexenta).
On top of our generally poor performance (max 7000 IOPS per GbE NIC), we
are seeing abysmal performance when we try to compensate by using either
dm-multipath or dmadm to use multiple iSCSI LUNs.
We have been testing using an eight processor Linux server with 6 GbE
network interfaces speaking to a Nexenta based Z200 storage system from
Pogo Linux with 10 GbE ports. I will attach a text file with some
results using disktest.
In summary, if we ran four completely independent tests against four
separate targets on four separate NICs, we achieved an aggregate 24940
IOPS with 512 byte blocks and 6713 IOPS with 64KB blocks.
However, we would prefer to treat the storage as a single disk and so
attempted to use software RAID, i.e., we created four LUNs, presented
them as four separate disks and then used software RAID0 to stripe
across all four targets. We expected slightly less than the performance
cited above. Instead, we received 4450 IOPS for 512 and for 64KB.
We then took a different approach and created one big LUN with eight
paths to the target using dm-multipath multibus with round-robin
scheduling and rr_min_io=100. Our numbers were 4350 IOPS for 512 and
1450 IOPS with 64KB.
We then suspected it might an issue of the number of threads rather than
just the number of disks, i.e., the four independent disk test was using
four separate processes. So we ran four separate, concurrent tests
against the RAID0 array and the multipath setup.
RAID0 increased to 11720 IOPS for 512 and 3188 IOPS for 64 KB - still a
far cry from 24900 and and 6713. dm-multipath numbers were 10140 IOPS
for 512 and 2563 IOPS for 64KB. Moreover, the CPU utilization was
brutal.
/etc/multipath.conf:
blacklist {
# devnode "*"
# sdb
wwid SATA_ST3250310NS_9SF0L234
#sda
wwid SATA_ST3250310NS_9SF0LVSR
# The above does not seem to be working thus we will do
devnode "^sd[ab]$"
# This is usually a bad idea as the device names can change
# However, since we add our iSCSI devices long after boot, I
think we are safe
}
defaults {
udev_dir /dev
polling_interval 5
selector "round-robin 0"
path_grouping_policy multibus
getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
prio_callout /bin/true
path_checker readsector0
rr_min_io 100
max_fds 8192
rr_weight priorities
failback immediate
no_path_retry fail
# user_friendly_names yes
}
multipaths {
multipath {
wwid
3600144f0e2824900000049b98e2b0001
alias isda
}
multipath {
wwid
3600144f0e2824900000049b062950002
alias isdplain
}
multipath {
wwid
3600144f0e2824900000049b9bb350001
alias isdb
}
multipath {
wwid
3600144f0e2824900000049b9bb350002
alias isdc
}
multipath {
wwid
3600144f0e2824900000049b9bb360003
alias isdd
}
multipath {
wwid
3600144f0e2824900000049b7878a0006
alias isdtest
}
}
devices {
device {
vendor "NEXENTA"
product "COMSTAR"
# vendor "SUN"
# product "SOLARIS"
getuid_callout "/sbin/scsi_id -g -u -s /block/%
n"
features "0"
hardware_handler "0"
# path_grouping_policy failover
rr_weight uniform
# rr_min_io 1000
path_checker readsector0
}
}
What would account for such miserable performance? How can we improve
it? We do not want to proliferate disks just to increase aggregate
performance. Thanks - John
--
John A. Sullivan III
Open Source Development Corporation
+1 207-985-7880
jsullivan at opensourcedevel.com
http://www.spiritualoutreach.com
Making Christianity intelligible to secular society
More information about the dm-devel
mailing list