[dm-devel] [PATCH v6 1/4] dm-replicator: documentation and module registry
张宇
chaimvy at gmail.com
Thu Jan 7 10:18:10 UTC 2010
Is there any command-line example to explain how to use this patch?
I have compiled it and loaded the modules, the '<start><length>' target
parameters in both replicator ant replicator-dev targets means what?
how can I construct these target?
I haven't read the source code in detail till now, sorry.
2009/12/18 <heinzm at redhat.com>
> From: Heinz Mauelshagen <heinzm at redhat.com>
>
> The dm-registry module is a general purpose registry for modules.
>
> The remote replicator utilizes it to register its ringbuffer log and
> site link handlers in order to avoid duplicating registry code and logic.
>
>
> Signed-off-by: Heinz Mauelshagen <heinzm at redhat.com>
> Reviewed-by: Jon Brassow <jbrassow at redhat.com>
> Tested-by: Jon Brassow <jbrassow at redhat.com>
> ---
> Documentation/device-mapper/replicator.txt | 203
> +++++++++++++++++++++++++
> drivers/md/Kconfig | 8 +
> drivers/md/Makefile | 1 +
> drivers/md/dm-registry.c | 224
> ++++++++++++++++++++++++++++
> drivers/md/dm-registry.h | 38 +++++
> 5 files changed, 474 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/device-mapper/replicator.txt
> create mode 100644 drivers/md/dm-registry.c
> create mode 100644 drivers/md/dm-registry.h
>
> diff --git 2.6.33-rc1.orig/Documentation/device-mapper/replicator.txt
> 2.6.33-rc1/Documentation/device-mapper/replicator.txt
> new file mode 100644
> index 0000000..1d408a6
> --- /dev/null
> +++ 2.6.33-rc1/Documentation/device-mapper/replicator.txt
> @@ -0,0 +1,203 @@
> +dm-replicator
> +=============
> +
> +Device-mapper replicator is designed to enable redundant copies of
> +storage devices to be made - preferentially, to remote locations.
> +RAID1 (aka mirroring) is often used to maintain redundant copies of
> +storage for fault tolerance purposes. Unlike RAID1, which often
> +assumes similar device characteristics, dm-replicator is designed to
> +handle devices with different latency and bandwidth characteristics
> +which are often the result of the geograhic disparity of multi-site
> +architectures. Simply put, you might choose RAID1 to protect from
> +a single device failure, but you would choose remote replication
> +via dm-replicator for protection against a site failure.
> +
> +dm-replicator works by first sending write requests to the "replicator
> +log". Not to be confused with the device-mapper dirty log, this
> +replicator log behaves similarly to that of a journal. Write requests
> +go to this log first and then are copied to all the replicate devices
> +at their various locations. Requests are cleared from the log once all
> +replicate devices confirm the data is received/copied. This architecture
> +allows dm-replicator to be flexible in terms of device characteristics.
> +If one device should fall behind the others - perhaps due to high latency
> -
> +the slack is picked up by the log. The user has a great deal of
> +flexibility in specifying to what degree a particular site is allowed to
> +fall behind - if at all.
> +
> +Device-Mapper's dm-replicator has two targets, "replicator" and
> +"replicator-dev". The "replicator" target is used to setup the
> +aforementioned log and allow the specification of site link properties.
> +Through the "replicator" target, the user might specify that writes
> +that are copied to the local site must happen synchronously (i.e the
> +writes are complete only after they have passed through the log device
> +and have landed on the local site's disk). They may also specify that
> +a remote link should asynchronously complete writes, but that the remote
> +link should never fall more than 100MB behind in terms of processing.
> +Again, the "replicator" target is used to define the replicator log and
> +the characteristics of each site link.
> +
> +The "replicator-dev" target is used to define the devices used and
> +associate them with a particular replicator log. You might think of
> +this stage in a similar way to setting up RAID1 (mirroring). You
> +define a set of devices which will be copies of each other, but
> +access the device through the mirror virtual device which takes care
> +of the copying. The user accessible replicator device is analogous
> +to the mirror virtual device, while the set of devices being copied
> +to are analogous to the mirror images (sometimes called 'legs').
> +When creating a replicator device via the "replicator-dev" target,
> +it must be associated with the replicator log (created with the
> +aforementioned "replicator" target). When each redundant device
> +is specified as part of the replicator device, it is associated with
> +a site link whose properties were defined when the "replicator"
> +target was created.
> +
> +The user can go farther than simply replicating one device. They
> +can continue to add replicator devices - associating them with a
> +particular replicator log. Writes that go through the replicator
> +log are guarenteed to have their write ordering preserved. So, if
> +you associate more than one replicator device to a particular
> +replicator log, you are preserving write ordering across multiple
> +devices. This might be useful if you had a database that spanned
> +multiple disks and write ordering must be preserved or any transaction
> +accounting scheme would be foiled. (You can imagine this like
> +preserving write ordering across a number of mirrored devices, where
> +each mirror has images/legs in different geographic locations.)
> +
> +dm-replicator has a modular architecture. Future implementations for
> +the replicator log and site link modules are allowed. The current
> +replication log is ringbuffer - utilized to store all writes being
> +subject to replication and enforce write ordering. The current site
> +link code is based on accessing block devices (iSCSI, FC, etc) and
> +does device recovery including (initial) resynchronization.
> +
> +
> +Picture of a 2 site configuration with 3 local devices (LDs) in a
> +primary site being resycnhronied to 3 remotes sites with 3 remote
> +devices (RDs) each via site links (SLINK) 1-2 with site link 0
> +as a special case to handle the local devices:
> +
> + |
> + Local (primary) site | Remote sites
> + -------------------- | ------------
> + |
> + D1 D2 Dn |
> + | | | |
> + +---+- ... -+ |
> + | |
> + REPLOG-----------------+- SLINK1 ------------+
> + | | | |
> + SLINK0 (special case) | | |
> + | | | |
> + +-----+ ... + | | +----+- ... -+
> + | | | | | | | |
> + LD1 LD2 LDn | | RD1 RD2 RDn
> + | |
> + +-- SLINK2------------+
> + | | |
> + | | +----+- ... -+
> + | | | | |
> + | | RD1 RD2 RDn
> + | |
> + | |
> + | |
> + +- SLINKm ------------+
> + | |
> + | +----+- ... -+
> + | | | |
> + | RD1 RD2 RDn
> +
> +
> +
> +
> +The following are descriptions of the device-mapper tables used to
> +construct the "replicator" and "replicator-dev" targets.
> +
> +"replicator" target parameters:
> +-------------------------------
> +<start> <length> replicator \
> + <replog_type> <#replog_params> <replog_params> \
> + [<slink_type_0> <#slink_params_0> <slink_params_0>]{1..N}
> +
> +<replog_type> = "ringbuffer" is currently the only available type
> +<#replog_params> = # of args following this one intended for the replog (2
> or 4)
> +<replog_params> = <dev_path> <dev_start> [auto/create/open <size>]
> + <dev_path> = device path of replication log (REPLOG) backing store
> + <dev_start> = offset to REPLOG header
> + create = The replication log will be initialized if not active
> + and sized to "size". (If already active, the create
> + will fail.) Size is always in sectors.
> + open = The replication log must be initialized and valid or
> + the constructor will fail.
> + auto = If a valid replication log header is found on the
> + replication device, this will behave like 'open'.
> + Otherwise, this option behaves like 'create'.
> +
> +<slink_type> = "blockdev" is currently the only available type
> +<#slink_params> = 1/2/4
> +<slink_params> = <slink_nr> [<slink_policy> [<fall_behind> <N>]]
> + <slink_nr> = This is a unique number that is used to identify a
> + particular site/location. '0' is always used to
> + identify the local site, while increasing integers
> + are used to identify remote sites.
> + <slink_policy> = The policy can be either 'sync' or 'async'.
> + 'sync' means write requests will not return until
> + the data is on the storage device. 'async' allows
> + a device to "fall behind"; that is, outstanding
> + write requests are waiting in the replication log
> + to be processed for this site, but it is not
> delaying
> + the writes of other sites.
> + <fall_behind> = This field is used to specify how far the user is
> + willing to allow write requests to this specific
> site
> + to "fall behind" in processing before switching to
> + a 'sync' policy. This "fall behind" threshhold
> can
> + be specified in three ways: ios, size, or timeout.
> + 'ios' is the number of pending I/Os allowed (e.g.
> + "ios 10000"). 'size' is the amount of pending
> data
> + allowed (e.g. "size 200m"). Size labels include:
> + s (sectors), k, m, g, t, p, and e. 'timeout' is
> + the amount of time allowed for writes to be
> + outstanding. Time labels include: s, m, h, and d.
> +
> +
> +"replicator-dev" target parameters:
> +-----------------------------------
> +start> <length> replicator-dev
> + <replicator_device> <dev_nr> \
> + [<slink_nr> <#dev_params> <dev_params>
> + <dlog_type> <#dlog_params> <dlog_params>]{1..N}
> +
> +<replicator_device> = device previously constructed via "replication"
> target
> +<dev_nr> = An integer that is used to 'tag' write requests as
> + belonging to a particular set of devices -
> specifically,
> + the devices that follow this argument (i.e. the site
> + link devices).
> +<slink_nr> = This number identifies the site/location where the
> next
> + device to be specified comes from. It is exactly the
> + same number used to identify the site/location (and
> its
> + policies) in the "replicator" target. Interestingly,
> + while one might normally expect a "dev_type" argument
> + here, it can be deduced from the site link number and
> + the 'slink_type' given in the "replication" target.
> +<#dev_params> = '1' (The number of allowed parameters actually
> depends
> + on the 'slink_type' given in the "replication"
> target.
> + Since our only option there is "blockdev", the only
> + allowable number here is currently '1'.)
> +<dev_params> = 'dev_path' (Again, since "blockdev" is the only
> + 'slink_type' available, the only allowable argument
> here
> + is the path to the device.)
> +<dlog_type> = Not to be confused with the "replicator log", this is
> + the type of dirty log associated with this particular
> + device. Dirty logs are used for synchronization,
> during
> + initialization or fall behind conditions, to bring
> devices
> + into a coherent state with its peers - analogous to
> + rebuilding a RAID1 (mirror) device. Available dirty
> + log types include: 'nolog', 'core', and 'disk'
> +<#dlog_params> = The number of arguments required for a particular log
> + type - 'nolog' = 0, 'core' = 1/2, 'disk' = 2/3.
> +<dlog_params> = 'nolog' => ~no arguments~
> + 'core' => <region_size> [sync | nosync]
> + 'disk' => <dlog_dev_path> <region_size> [sync |
> nosync]
> + <region_size> = This sets the granularity at which the dirty log
> + tracks what areas of the device is in-sync.
> + [sync | nosync] = Optionally specify whether the sync should be
> forced
> + or avoided initially.
> diff --git 2.6.33-rc1.orig/drivers/md/Kconfig 2.6.33-rc1/drivers/md/Kconfig
> index acb3a4e..62c9766 100644
> --- 2.6.33-rc1.orig/drivers/md/Kconfig
> +++ 2.6.33-rc1/drivers/md/Kconfig
> @@ -313,6 +313,14 @@ config DM_DELAY
>
> If unsure, say N.
>
> +config DM_REPLICATOR
> + tristate "Replication target (EXPERIMENTAL)"
> + depends on BLK_DEV_DM && EXPERIMENTAL
> + ---help---
> + A target that supports replication of local devices to remote
> sites.
> +
> + If unsure, say N.
> +
> config DM_UEVENT
> bool "DM uevents (EXPERIMENTAL)"
> depends on BLK_DEV_DM && EXPERIMENTAL
> diff --git 2.6.33-rc1.orig/drivers/md/Makefile
> 2.6.33-rc1/drivers/md/Makefile
> index e355e7f..be05b39 100644
> --- 2.6.33-rc1.orig/drivers/md/Makefile
> +++ 2.6.33-rc1/drivers/md/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
> obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o
> dm-region-hash.o
> obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
> obj-$(CONFIG_DM_ZERO) += dm-zero.o
> +obj-$(CONFIG_DM_REPLICATOR) += dm-log.o dm-registry.o
>
> quiet_cmd_unroll = UNROLL $@
> cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
> diff --git 2.6.33-rc1.orig/drivers/md/dm-registry.c
> 2.6.33-rc1/drivers/md/dm-registry.c
> new file mode 100644
> index 0000000..fb8abbf
> --- /dev/null
> +++ 2.6.33-rc1/drivers/md/dm-registry.c
> @@ -0,0 +1,224 @@
> +/*
> + * Copyright (C) 2009 Red Hat, Inc. All rights reserved.
> + *
> + * Module Author: Heinz Mauelshagen (heinzm at redhat.com)
> + *
> + * Generic registry for arbitrary structures
> + * (needs dm_registry_type structure upfront each registered structure).
> + *
> + * This file is released under the GPL.
> + *
> + * FIXME: use as registry for e.g. dirty log types as well.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +
> +#include "dm-registry.h"
> +
> +#define DM_MSG_PREFIX "dm-registry"
> +
> +static const char *version = "0.001";
> +
> +/* Sizable class registry. */
> +static unsigned num_classes;
> +static struct list_head *_classes;
> +static rwlock_t *_locks;
> +
> +void *
> +dm_get_type(const char *type_name, enum dm_registry_class class)
> +{
> + struct dm_registry_type *t;
> +
> + read_lock(_locks + class);
> + list_for_each_entry(t, _classes + class, list) {
> + if (!strcmp(type_name, t->name)) {
> + if (!t->use_count && !try_module_get(t->module)) {
> + read_unlock(_locks + class);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + t->use_count++;
> + read_unlock(_locks + class);
> + return t;
> + }
> + }
> +
> + read_unlock(_locks + class);
> + return ERR_PTR(-ENOENT);
> +}
> +EXPORT_SYMBOL(dm_get_type);
> +
> +void
> +dm_put_type(void *type, enum dm_registry_class class)
> +{
> + struct dm_registry_type *t = type;
> +
> + read_lock(_locks + class);
> + if (!--t->use_count)
> + module_put(t->module);
> +
> + read_unlock(_locks + class);
> +}
> +EXPORT_SYMBOL(dm_put_type);
> +
> +/* Add a type to the registry. */
> +int
> +dm_register_type(void *type, enum dm_registry_class class)
> +{
> + struct dm_registry_type *t = type, *tt;
> +
> + if (unlikely(class >= num_classes))
> + return -EINVAL;
> +
> + tt = dm_get_type(t->name, class);
> + if (unlikely(!IS_ERR(tt))) {
> + dm_put_type(t, class);
> + return -EEXIST;
> + }
> +
> + write_lock(_locks + class);
> + t->use_count = 0;
> + list_add(&t->list, _classes + class);
> + write_unlock(_locks + class);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(dm_register_type);
> +
> +/* Remove a type from the registry. */
> +int
> +dm_unregister_type(void *type, enum dm_registry_class class)
> +{
> + struct dm_registry_type *t = type;
> +
> + if (unlikely(class >= num_classes)) {
> + DMERR("Attempt to unregister invalid class");
> + return -EINVAL;
> + }
> +
> + write_lock(_locks + class);
> +
> + if (unlikely(t->use_count)) {
> + write_unlock(_locks + class);
> + DMWARN("Attempt to unregister a type that is still in
> use");
> + return -ETXTBSY;
> + } else
> + list_del(&t->list);
> +
> + write_unlock(_locks + class);
> + return 0;
> +}
> +EXPORT_SYMBOL(dm_unregister_type);
> +
> +/*
> + * Return kmalloc'ed NULL terminated pointer
> + * array of all type names of the given class.
> + *
> + * Caller has to kfree the array!.
> + */
> +const char **dm_types_list(enum dm_registry_class class)
> +{
> + unsigned i = 0, count = 0;
> + const char **r;
> + struct dm_registry_type *t;
> +
> + /* First count the registered types in the class. */
> + read_lock(_locks + class);
> + list_for_each_entry(t, _classes + class, list)
> + count++;
> + read_unlock(_locks + class);
> +
> + /* None registered in this class. */
> + if (!count)
> + return NULL;
> +
> + /* One member more for array NULL termination. */
> + r = kzalloc((count + 1) * sizeof(*r), GFP_KERNEL);
> + if (!r)
> + return ERR_PTR(-ENOMEM);
> +
> + /*
> + * Go with the counted ones.
> + * Any new added ones after we counted will be ignored!
> + */
> + read_lock(_locks + class);
> + list_for_each_entry(t, _classes + class, list) {
> + r[i++] = t->name;
> + if (!--count)
> + break;
> + }
> + read_unlock(_locks + class);
> +
> + return r;
> +}
> +EXPORT_SYMBOL(dm_types_list);
> +
> +int __init
> +dm_registry_init(void)
> +{
> + unsigned n;
> +
> + BUG_ON(_classes);
> + BUG_ON(_locks);
> +
> + /* Module parameter given ? */
> + if (!num_classes)
> + num_classes = DM_REGISTRY_CLASS_END;
> +
> + n = num_classes;
> + _classes = kmalloc(n * sizeof(*_classes), GFP_KERNEL);
> + if (!_classes) {
> + DMERR("Failed to allocate classes registry");
> + return -ENOMEM;
> + }
> +
> + _locks = kmalloc(n * sizeof(*_locks), GFP_KERNEL);
> + if (!_locks) {
> + DMERR("Failed to allocate classes locks");
> + kfree(_classes);
> + _classes = NULL;
> + return -ENOMEM;
> + }
> +
> + while (n--) {
> + INIT_LIST_HEAD(_classes + n);
> + rwlock_init(_locks + n);
> + }
> +
> + DMINFO("initialized %s for max %u classes", version, num_classes);
> + return 0;
> +}
> +
> +void __exit
> +dm_registry_exit(void)
> +{
> + BUG_ON(!_classes);
> + BUG_ON(!_locks);
> +
> + kfree(_classes);
> + _classes = NULL;
> + kfree(_locks);
> + _locks = NULL;
> + DMINFO("exit %s", version);
> +}
> +
> +/* Module hooks */
> +module_init(dm_registry_init);
> +module_exit(dm_registry_exit);
> +module_param(num_classes, uint, 0);
> +MODULE_PARM_DESC(num_classes, "Maximum number of classes");
> +MODULE_DESCRIPTION(DM_NAME "device-mapper registry");
> +MODULE_AUTHOR("Heinz Mauelshagen <heinzm at redhat.com>");
> +MODULE_LICENSE("GPL");
> +
> +#ifndef MODULE
> +static int __init num_classes_setup(char *str)
> +{
> + num_classes = simple_strtol(str, NULL, 0);
> + return num_classes ? 1 : 0;
> +}
> +
> +__setup("num_classes=", num_classes_setup);
> +#endif
> diff --git 2.6.33-rc1.orig/drivers/md/dm-registry.h
> 2.6.33-rc1/drivers/md/dm-registry.h
> new file mode 100644
> index 0000000..1cb0ce8
> --- /dev/null
> +++ 2.6.33-rc1/drivers/md/dm-registry.h
> @@ -0,0 +1,38 @@
> +/*
> + * Copyright (C) 2009 Red Hat, Inc. All rights reserved.
> + *
> + * Module Author: Heinz Mauelshagen (heinzm at redhat.com)
> + *
> + * Generic registry for arbitrary structures.
> + * (needs dm_registry_type structure upfront each registered structure).
> + *
> + * This file is released under the GPL.
> + */
> +
> +#include "dm.h"
> +
> +#ifndef DM_REGISTRY_H
> +#define DM_REGISTRY_H
> +
> +enum dm_registry_class {
> + DM_REPLOG = 0,
> + DM_SLINK,
> + DM_LOG,
> + DM_REGION_HASH,
> + DM_REGISTRY_CLASS_END,
> +};
> +
> +struct dm_registry_type {
> + struct list_head list; /* Linked list of types in this class. */
> + const char *name;
> + struct module *module;
> + unsigned int use_count;
> +};
> +
> +void *dm_get_type(const char *type_name, enum dm_registry_class class);
> +void dm_put_type(void *type, enum dm_registry_class class);
> +int dm_register_type(void *type, enum dm_registry_class class);
> +int dm_unregister_type(void *type, enum dm_registry_class class);
> +const char **dm_types_list(enum dm_registry_class class);
> +
> +#endif
> --
> 1.6.2.5
>
> --
> dm-devel mailing list
> dm-devel at redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/dm-devel/attachments/20100107/026e76b0/attachment.htm>
More information about the dm-devel
mailing list