[dm-devel] [Multipath] Round-robin performance limit
Adam Chasen
adam at chasen.name
Thu Apr 28 15:55:55 UTC 2011
I am very pleased with the features and even some of the documentation
(once I found the RedHat docs) surrounding the latest .49 multipath
tools.
I would imagine that the multipath driver would attempt to max out the
links available to it, but I am not seeing that behavior. I am unable
to achieve bandwidth greater than the value of one of the four links.
Is this the expected behavior?
It is balancing the traffic between the links and when a path fails
the bandwidth increases proportionately between the remaining links. I
originally thought this may be a problem outside of multipath, but
accessing the devices directly allows me to max out all of my links.
If there is a more appropriate venue for this question, I would
appreciate a redirection.
The current setup is as follows:
* iSCSI with 4 portals with two LUNs defined
* server connected to each portal over 4 Gigabit ports (1 to 1 mapping
of ports) yielding 4 devices for each LUN, 8 devices total
There is one device per LUN per portal connection. Multipathing is
enabled with multibus so the round robin will leverage all (4) devices
available per LUN.
I have experienced the following scenarios. I used dd (reading from
device) and bmon (network interface monitor) for all of these tests.
Note that the bandwidth never exceeds 113MB/s.
* direct (no multipath)
** all links fully saturated
** bandwidth close to theoretical max of the gigabit connection (113MB/s).
* all dvices active (multipath)
** all links equally balanced
** links show 1/4 saturation (~30MB/s)
** bandwidth ~113MB/s
* 3 of 4 devices active (multipath)
** remaining links equally balanced
** remaining links show 1/3 saturation (~40MB/s)
** bandwidth ~113MB/s
* 2 of 4 devices active (multipath)
** active links equally balanced
** active links show 1/2 saturation (~60MB/s)
** bandwidth ~113MB/s
* 1 of 4 devices active (multipath)
** active links equally balanced
** active link shows full saturation (~113MB/s)
** bandwidth ~113MB/s
To ensure that it is not the transport or backing storage, I dd from
the direct device, during the tests where the links were not fully
saturated and I was able to fully saturate the link.
[root at zed ~]# multipath -ll
3600c0ff000111346d473554d01000000 dm-3 DotHill,DH3000
size=1.1T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 88:0:0:0 sdd 8:48 active ready running
|- 86:0:0:0 sdc 8:32 active ready running
|- 89:0:0:0 sdg 8:96 active ready running
`- 87:0:0:0 sdf 8:80 active ready running
3600c0ff00011148af973554d01000000 dm-2 DotHill,DH3000
size=1.1T features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
|- 89:0:0:1 sdk 8:160 active ready running
|- 88:0:0:1 sdi 8:128 active ready running
|- 86:0:0:1 sdh 8:112 active ready running
`- 87:0:0:1 sdl 8:176 active ready running
/etc/multipath.conf
defaults {
path_grouping_policy multibus
rr_min_io 100
}
multipath-tools v0.4.9 (05/33, 2016)
2.6.35.11-2-fl.smp.gcc4.4.x86_64
Thanks,
Adam
More information about the dm-devel
mailing list