[dm-devel] ERROR: asr: reading /dev/sdo[Input/output error]
Heinz Mauelshagen
heinzm at redhat.com
Wed Dec 7 16:20:53 UTC 2011
On 12/07/2011 04:21 PM, Christian May wrote:
> Hi,
>
> I've setup an IBM HS21 blade with RHEL6.1. The OS installed on a
> DS5100 storage server (SAN boot).
> During booting I'm recognizing the following messages:
>
> Starting udev: OK
> Setting hostname elm8a203.beaverton.ibm.com:
> ERROR: asr: reading /dev/sdo[Input/output error]
> ERROR: ddf1: reading /dev/sdo[Input/output error]
> ERROR: ddf1: reading /dev/sdo[Input/output error]
> ERROR: hpt37x: reading /dev/sdo[Input/output error]
> ERROR: hpt45x: reading /dev/sdo[Input/output error]
> ERROR: isw: reading /dev/sdo[Input/output error]
> ERROR: jmicron: reading /dev/sdo[Input/output error]
> ERROR: lsi: reading /dev/sdo[Input/output error]
> ERROR: nvidia: reading /dev/sdo[Input/output error]
> ERROR: pdc: reading /dev/sdo[Input/output error]
> ...
>
> ERROR: sil: reading /dev/sdf[Input/output error]
> ERROR: via: reading /dev/sdf[Input/output error]
> ERROR: asr: reading /dev/sde[Input/output error]
> ERROR: ddf1: reading /dev/sde[Input/output error]
> ERROR: ddf1: reading /dev/sde[Input/output error]
> ERROR: hpt37x: reading /dev/sde[Input/output error]
> ERROR: hpt45x: reading /dev/sde[Input/output error]
> ERROR: isw: reading /dev/sde[Input/output error]
> ERROR: jmicron: reading /dev/sde[Input/output error]
> ERROR: lsi: reading /dev/sde[Input/output error]
> ERROR: nvidia: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
> ERROR: pdc: reading /dev/sde[Input/output error]
>
>
> etc.
>
> All those device /dev/sd...are part of a multipath devices, e.g.:
>
>
> mpathh (3600a0b800047e4e4000008b54ebc91c3) dm-6 IBM,1818 FAStT
> size=25G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
> |-+- policy='round-robin 0' prio=6 status=active
> | `- 3:0:3:0 sdh 8:112 active ready running
> `-+- policy='round-robin 0' prio=1 status=enabled
> `- 4:0:2:0 sdo 8:224 active ghost running
> mpathg (3600a0b800011573a00006da14a648a22) dm-0 IBM,1815 FAStT
> size=4.8G features='1 queue_if_no_path' hwhandler='1 rdac' wp=rw
> |-+- policy='round-robin 0' prio=6 status=active
> | `- 4:0:1:1 sdn 8:208 active ready running
> `-+- policy='round-robin 0' prio=1 status=enabled
> `- 3:0:0:1 sdc 8:32 active ghost running
>
>
> OS is booting but how can I get rid of those messages? Is it
> udev-rules related?
You have to deactivate dmraid with the "nodmraid" kernel command line
option in order to avoid its scanning leading to the above error messages.
Regards,
Heinz
>
> Regards,
>
> Christian May (IBM)
>
>
>
> --
> dm-devel mailing list
> dm-devel at redhat.com
> https://www.redhat.com/mailman/listinfo/dm-devel
--
===============================================================
Heinz Mauelshagen +49 2626 141200
Consulting Development Engineer FAX +49 2626 924446
Red Hat GmbH
Am Sonnenhang 11
56242 Marienrachdorf
Germany heinzm at redhat.com
===============================================================
More information about the dm-devel
mailing list