[dm-devel] [PATCH 1/2] multipath-tools: delete trailing spaces and tabs
Xose Vazquez Perez
xose.vazquez at gmail.com
Tue Jun 14 20:59:34 UTC 2016
Cc: Christophe Varoqui <christophe.varoqui at opensvc.com>
Cc: device-mapper development <dm-devel at redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez at gmail.com>
diff --git a/Makefile.inc b/Makefile.inc
index ecc20ef..d7fc444 100644
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -39,7 +39,7 @@ ifndef SYSTEMDPATH
SYSTEMDPATH=usr/lib
endif
-prefix =
+prefix =
exec_prefix = $(prefix)
bindir = $(exec_prefix)/sbin
libudevdir = $(prefix)/$(SYSTEMDPATH)/udev
diff --git a/kpartx/crc32.c b/kpartx/crc32.c
index 42d803d..cfbe8a5 100644
--- a/kpartx/crc32.c
+++ b/kpartx/crc32.c
@@ -1,4 +1,4 @@
-/*
+/*
* crc32.c
* This code is in the public domain; copyright abandoned.
* Liability for non-performance of this code is limited to the amount
@@ -48,7 +48,7 @@
* other uses, or the previous crc32 value if computing incrementally.
* @p - pointer to buffer over which CRC is run
* @len - length of buffer @p
- *
+ *
*/
uint32_t attribute((pure)) crc32_le(uint32_t crc, unsigned char const *p, size_t len)
{
@@ -106,7 +106,7 @@ crc32cleanup_le(void)
* other uses, or the previous crc32 value if computing incrementally.
* @p - pointer to buffer over which CRC is run
* @len - length of buffer @p
- *
+ *
*/
uint32_t attribute((pure)) crc32_le(uint32_t crc, unsigned char const *p, size_t len)
{
@@ -151,7 +151,7 @@ uint32_t attribute((pure)) crc32_le(uint32_t crc, unsigned char const *p, size_t
* other uses, or the previous crc32 value if computing incrementally.
* @p - pointer to buffer over which CRC is run
* @len - length of buffer @p
- *
+ *
*/
uint32_t attribute((pure)) crc32_be(uint32_t crc, unsigned char const *p, size_t len)
{
@@ -209,7 +209,7 @@ crc32cleanup_be(void)
* other uses, or the previous crc32 value if computing incrementally.
* @p - pointer to buffer over which CRC is run
* @len - length of buffer @p
- *
+ *
*/
uint32_t attribute((pure)) crc32_be(uint32_t crc, unsigned char const *p, size_t len)
{
@@ -340,7 +340,7 @@ uint32_t attribute((pure)) crc32_be(uint32_t crc, unsigned char const *p, size_t
* in the correct multiple to subtract, we can shift a byte at a time.
* This produces a 40-bit (rather than a 33-bit) intermediate remainder,
* but again the multiple of the polynomial to subtract depends only on
- * the high bits, the high 8 bits in this case.
+ * the high bits, the high 8 bits in this case.
*
* The multile we need in that case is the low 32 bits of a 40-bit
* value whose high 8 bits are given, and which is a multiple of the
@@ -362,7 +362,7 @@ uint32_t attribute((pure)) crc32_be(uint32_t crc, unsigned char const *p, size_t
/**
* init_crc32(): generates CRC32 tables
- *
+ *
* On successful initialization, use count is increased.
* This guarantees that the library functions will stay resident
* in memory, and prevents someone from 'rmmod crc32' while
diff --git a/kpartx/dasd.c b/kpartx/dasd.c
index 14c35b1..ef13709 100644
--- a/kpartx/dasd.c
+++ b/kpartx/dasd.c
@@ -65,7 +65,7 @@ typedef unsigned int __attribute__((__may_alias__)) label_ints_t;
/*
*/
-int
+int
read_dasd_pt(int fd, struct slice all, struct slice *sp, int ns)
{
int retval = -1;
diff --git a/kpartx/dasd.h b/kpartx/dasd.h
index 6fa64e6..1f6c99f 100644
--- a/kpartx/dasd.h
+++ b/kpartx/dasd.h
@@ -27,33 +27,33 @@
#ifndef _DASD_H
#define _DASD_H
-typedef struct ttr
+typedef struct ttr
{
uint16_t tt;
uint8_t r;
} __attribute__ ((packed)) ttr_t;
-typedef struct cchhb
+typedef struct cchhb
{
uint16_t cc;
uint16_t hh;
uint8_t b;
} __attribute__ ((packed)) cchhb_t;
-typedef struct cchh
+typedef struct cchh
{
uint16_t cc;
uint16_t hh;
} __attribute__ ((packed)) cchh_t;
-typedef struct labeldate
+typedef struct labeldate
{
uint8_t year;
uint16_t day;
} __attribute__ ((packed)) labeldate_t;
-typedef struct volume_label
+typedef struct volume_label
{
char volkey[4]; /* volume key = volume label */
char vollbl[4]; /* volume label */
@@ -73,7 +73,7 @@ typedef struct volume_label
} __attribute__ ((packed)) volume_label_t;
-typedef struct extent
+typedef struct extent
{
uint8_t typeind; /* extent type indicator */
uint8_t seqno; /* extent sequence number */
@@ -82,7 +82,7 @@ typedef struct extent
} __attribute__ ((packed)) extent_t;
-typedef struct dev_const
+typedef struct dev_const
{
uint16_t DS4DSCYL; /* number of logical cyls */
uint16_t DS4DSTRK; /* number of tracks in a logical cylinder */
@@ -97,7 +97,7 @@ typedef struct dev_const
} __attribute__ ((packed)) dev_const_t;
-typedef struct format1_label
+typedef struct format1_label
{
char DS1DSNAM[44]; /* data set name */
uint8_t DS1FMTID; /* format identifier */
@@ -243,12 +243,12 @@ static unsigned char EBCtoASC[256] =
0x38, 0x39, 0x07, 0x07, 0x9A, 0x07, 0x07, 0x07
};
-static inline void
+static inline void
vtoc_ebcdic_dec (const char *source, char *target, int l)
{
int i;
- for (i = 0; i < l; i++)
+ for (i = 0; i < l; i++)
target[i]=(char)EBCtoASC[(unsigned char)(source[i])];
}
diff --git a/kpartx/dos.c b/kpartx/dos.c
index f252d0a..64b27b6 100644
--- a/kpartx/dos.c
+++ b/kpartx/dos.c
@@ -1,7 +1,7 @@
/*
* Source: copy of util-linux' partx dos.c
*
- * Copyrights of the original file apply
+ * Copyrights of the original file apply
* Copyright (c) 2005 Bastian Blank
*/
#include "kpartx.h"
diff --git a/kpartx/gpt.c b/kpartx/gpt.c
index 5a54970..ef4092b 100644
--- a/kpartx/gpt.c
+++ b/kpartx/gpt.c
@@ -1,7 +1,7 @@
/*
gpt.[ch]
- Copyright (C) 2000-2001 Dell Computer Corporation <Matt_Domsch at dell.com>
+ Copyright (C) 2000-2001 Dell Computer Corporation <Matt_Domsch at dell.com>
EFI GUID Partition Table handling
Per Intel EFI Specification v1.02
@@ -77,7 +77,7 @@ struct blkdev_ioctl_param {
* @len - length of buf
*
* Description: Returns EFI-style CRC32 value for @buf
- *
+ *
* This function uses the little endian Ethernet polynomial
* but seeds the function with ~0, and xor's with ~0 at the end.
* Note, the EFI Specification, v1.02, has a reference to
@@ -122,7 +122,7 @@ is_pmbr_valid(legacy_mbr *mbr)
* - filedes is an open file descriptor, suitable for reading
* Modifies: nothing
* Returns:
- * Last LBA value on success
+ * Last LBA value on success
* 0 on error
*
* Try getting BLKGETSIZE64 and BLKSSZGET first,
@@ -146,9 +146,9 @@ _get_num_sectors(int filedes)
/************************************************************
* last_lba(): return number of last logical block of device
- *
+ *
* @fd
- *
+ *
* Description: returns Last LBA value on success, 0 on error.
* Notes: The value st_blocks gives the size of the file
* in 512-byte blocks, which is OK if
@@ -188,7 +188,7 @@ read_lastoddsector(int fd, uint64_t lba, void *buffer, size_t count)
int rc;
struct blkdev_ioctl_param ioctl_param;
- if (!buffer) return 0;
+ if (!buffer) return 0;
ioctl_param.block = 0; /* read the last sector */
ioctl_param.content_length = count;
@@ -229,7 +229,7 @@ read_lba(int fd, uint64_t lba, void *buffer, size_t bytes)
/**
* alloc_read_gpt_entries(): reads partition entries from disk
* @fd is an open file descriptor to the whole disk
- * @gpt is a buffer into which the GPT will be put
+ * @gpt is a buffer into which the GPT will be put
* Description: Returns ptes on success, NULL on error.
* Allocates space for PTEs based on information found in @gpt.
* Notes: remember to free pte when you're done!
@@ -260,7 +260,7 @@ alloc_read_gpt_entries(int fd, gpt_header * gpt)
* alloc_read_gpt_header(): Allocates GPT header, reads into it from disk
* @fd is an open file descriptor to the whole disk
* @lba is the Logical Block Address of the partition table
- *
+ *
* Description: returns GPT header on success, NULL on error. Allocates
* and fills a GPT header starting at @ from @bdev.
* Note: remember to free gpt when finished with it.
@@ -306,7 +306,7 @@ is_gpt_valid(int fd, uint64_t lba,
/* Check the GUID Partition Table signature */
if (__le64_to_cpu((*gpt)->signature) != GPT_HEADER_SIGNATURE) {
- /*
+ /*
printf("GUID Partition Table Header signature is wrong: %" PRIx64" != %" PRIx64 "\n",
__le64_to_cpu((*gpt)->signature), GUID_PT_HEADER_SIGNATURE);
*/
@@ -387,7 +387,7 @@ is_gpt_valid(int fd, uint64_t lba,
* @lastlba is the last LBA number
* Description: Returns nothing. Sanity checks pgpt and agpt fields
* and prints warnings on discrepancies.
- *
+ *
*/
static void
compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
@@ -397,7 +397,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
return;
if (__le64_to_cpu(pgpt->my_lba) != __le64_to_cpu(agpt->alternate_lba)) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:Primary header LBA != Alt. header alternate_lba\n");
#ifdef DEBUG
fprintf(stderr, "GPT:%" PRIx64 " != %" PRIx64 "\n",
@@ -407,7 +407,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
}
if (__le64_to_cpu(pgpt->alternate_lba) != __le64_to_cpu(agpt->my_lba)) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:Primary header alternate_lba != Alt. header my_lba\n");
#ifdef DEBUG
fprintf(stderr, "GPT:%" PRIx64 " != %" PRIx64 "\n",
@@ -450,7 +450,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
if (__le32_to_cpu(pgpt->sizeof_partition_entry) !=
__le32_to_cpu(agpt->sizeof_partition_entry)) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:sizeof_partition_entry values don't match: "
"0x%x != 0x%x\n",
__le32_to_cpu(pgpt->sizeof_partition_entry),
@@ -459,7 +459,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
if (__le32_to_cpu(pgpt->partition_entry_array_crc32) !=
__le32_to_cpu(agpt->partition_entry_array_crc32)) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:partition_entry_array_crc32 values don't match: "
"0x%x != 0x%x\n",
__le32_to_cpu(pgpt->partition_entry_array_crc32),
@@ -467,7 +467,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
}
if (__le64_to_cpu(pgpt->alternate_lba) != lastlba) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:Primary header thinks Alt. header is not at the end of the disk.\n");
#ifdef DEBUG
fprintf(stderr, "GPT:%" PRIx64 " != %" PRIx64 "\n",
@@ -477,7 +477,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
if (__le64_to_cpu(agpt->my_lba) != lastlba) {
error_found++;
- fprintf(stderr,
+ fprintf(stderr,
"GPT:Alternate GPT header not at the end of the disk.\n");
#ifdef DEBUG
fprintf(stderr, "GPT:%" PRIx64 " != %" PRIx64 "\n",
@@ -486,7 +486,7 @@ compare_gpts(gpt_header *pgpt, gpt_header *agpt, uint64_t lastlba)
}
if (error_found)
- fprintf(stderr,
+ fprintf(stderr,
"GPT: Use GNU Parted to correct GPT errors.\n");
return;
}
@@ -560,7 +560,7 @@ find_valid_gpt(int fd, gpt_header ** gpt, gpt_entry ** ptes)
/* Would fail due to bad PMBR, but force GPT anyhow */
if ((good_pgpt || good_agpt) && !good_pmbr && force_gpt) {
- fprintf(stderr,
+ fprintf(stderr,
" Warning: Disk has a valid GPT signature but "
"invalid PMBR.\n"
" Use GNU Parted to correct disk.\n"
@@ -576,7 +576,7 @@ find_valid_gpt(int fd, gpt_header ** gpt, gpt_entry ** ptes)
if (agpt) { free(agpt); agpt = NULL; }
if (aptes) { free(aptes); aptes = NULL; }
if (!good_agpt) {
- fprintf(stderr,
+ fprintf(stderr,
"Alternate GPT is invalid, "
"using primary GPT.\n");
}
@@ -587,7 +587,7 @@ find_valid_gpt(int fd, gpt_header ** gpt, gpt_entry ** ptes)
*ptes = aptes;
if (pgpt) { free(pgpt); pgpt = NULL; }
if (pptes) { free(pptes); pptes = NULL; }
- fprintf(stderr,
+ fprintf(stderr,
"Primary GPT is invalid, using alternate GPT.\n");
return 1;
}
@@ -603,7 +603,7 @@ find_valid_gpt(int fd, gpt_header ** gpt, gpt_entry ** ptes)
}
/**
- * read_gpt_pt()
+ * read_gpt_pt()
* @fd
* @all - slice with start/size of whole disk
*
diff --git a/kpartx/gpt.h b/kpartx/gpt.h
index a073b42..1f35fa0 100644
--- a/kpartx/gpt.h
+++ b/kpartx/gpt.h
@@ -1,7 +1,7 @@
/*
gpt.[ch]
- Copyright (C) 2000-2001 Dell Computer Corporation <Matt_Domsch at dell.com>
+ Copyright (C) 2000-2001 Dell Computer Corporation <Matt_Domsch at dell.com>
EFI GUID Partition Table handling
Per Intel EFI Specification v1.02
@@ -76,15 +76,15 @@ typedef struct _gpt_entry {
} __attribute__ ((packed)) gpt_entry;
-/*
+/*
These values are only defaults. The actual on-disk structures
may define different sizes, so use those unless creating a new GPT disk!
*/
#define GPT_DEFAULT_RESERVED_PARTITION_ENTRY_ARRAY_SIZE 16384
-/*
+/*
Number of actual partition entries should be calculated
- as:
+ as:
*/
#define GPT_DEFAULT_RESERVED_PARTITION_ENTRIES \
(GPT_DEFAULT_RESERVED_PARTITION_ENTRY_ARRAY_SIZE / \
@@ -118,7 +118,7 @@ int read_gpt_pt (int fd, struct slice all, struct slice *sp, int ns);
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
- * c-indent-level: 4
+ * c-indent-level: 4
* c-brace-imaginary-offset: 0
* c-brace-offset: -4
* c-argdecl-indent: 4
diff --git a/kpartx/kpartx.8 b/kpartx/kpartx.8
index 021ddc0..7d1e71d 100644
--- a/kpartx/kpartx.8
+++ b/kpartx/kpartx.8
@@ -9,8 +9,8 @@ kpartx \- Create device maps from partition tables
.RB wholedisk
.SH DESCRIPTION
This tool, derived from util-linux' partx, reads partition
-tables on specified device and create device maps over partitions
-segments detected. It is called from hotplug upon device maps
+tables on specified device and create device maps over partitions
+segments detected. It is called from hotplug upon device maps
creation and deletion.
.SH OPTIONS
.TP
@@ -52,9 +52,9 @@ This will output lines such as:
.IP
loop3p1 : 0 20964762 /dev/loop3 63
.PP
-The
+The
.I loop3p1
-is the name of a device file under
+is the name of a device file under
.I /dev/mapper
which you can use to access the partition, for example to fsck it:
.IP
diff --git a/kpartx/lopart.c b/kpartx/lopart.c
index 39add44..a160d29 100644
--- a/kpartx/lopart.c
+++ b/kpartx/lopart.c
@@ -285,7 +285,7 @@ set_loop (const char *device, const char *file, int offset, int *loopro)
return 0;
}
-extern int
+extern int
del_loop (const char *device)
{
int retries = 5;
diff --git a/libmpathpersist/Makefile b/libmpathpersist/Makefile
index 59db73a..dd02158 100644
--- a/libmpathpersist/Makefile
+++ b/libmpathpersist/Makefile
@@ -10,21 +10,21 @@ DEVLIB = libmpathpersist.so
LIBS = $(DEVLIB).$(SONAME)
-CFLAGS += -I$(multipathdir) -I$(mpathpersistdir) -I$(mpathcmddir)
+CFLAGS += -I$(multipathdir) -I$(mpathpersistdir) -I$(mpathcmddir)
LIBDEPS += -lpthread -ldevmapper -ldl -L$(multipathdir) -lmultipath \
-L$(mpathcmddir) -lmpathcmd
-OBJS = mpath_persist.o mpath_updatepr.o mpath_pr_ioctl.o
+OBJS = mpath_persist.o mpath_updatepr.o mpath_pr_ioctl.o
all: $(LIBS)
-$(LIBS):
- $(CC) -Wall -fPIC -c $(CFLAGS) *.c
+$(LIBS):
+ $(CC) -Wall -fPIC -c $(CFLAGS) *.c
$(CC) -shared $(LIBDEPS) -Wl,-soname=$@ $(CFLAGS) -o $@ $(OBJS)
ln -s $(LIBS) $(DEVLIB)
- $(GZIP) mpath_persistent_reserve_in.3 > mpath_persistent_reserve_in.3.gz
- $(GZIP) mpath_persistent_reserve_out.3 > mpath_persistent_reserve_out.3.gz
+ $(GZIP) mpath_persistent_reserve_in.3 > mpath_persistent_reserve_in.3.gz
+ $(GZIP) mpath_persistent_reserve_out.3 > mpath_persistent_reserve_out.3.gz
install: $(LIBS)
$(INSTALL_PROGRAM) -d $(DESTDIR)$(syslibdir)
@@ -34,8 +34,8 @@ install: $(LIBS)
$(INSTALL_PROGRAM) -m 755 -d $(DESTDIR)$(incdir)
$(INSTALL_PROGRAM) -m 755 -d $(DESTDIR)/usr/share/doc/mpathpersist/
ln -sf $(DESTDIR)$(syslibdir)/$(LIBS) $(DESTDIR)$(syslibdir)/$(DEVLIB)
- install -m 644 mpath_persistent_reserve_in.3.gz $(DESTDIR)$(man3dir)
- install -m 644 mpath_persistent_reserve_out.3.gz $(DESTDIR)$(man3dir)
+ install -m 644 mpath_persistent_reserve_in.3.gz $(DESTDIR)$(man3dir)
+ install -m 644 mpath_persistent_reserve_out.3.gz $(DESTDIR)$(man3dir)
install -m 644 mpath_persist.h $(DESTDIR)$(incdir)
uninstall:
@@ -44,7 +44,7 @@ uninstall:
rm $(DESTDIR)$(man3dir)/mpath_persistent_reserve_out.3.gz
clean:
- rm -f core *.a *.o
+ rm -f core *.a *.o
rm -f libmpathpersist.so.0
rm -f libmpathpersist.so
rm -f mpath_persistent_reserve_in.3.gz mpath_persistent_reserve_out.3.gz
diff --git a/libmpathpersist/mpath_persist.c b/libmpathpersist/mpath_persist.c
index b23e116..819c3af 100644
--- a/libmpathpersist/mpath_persist.c
+++ b/libmpathpersist/mpath_persist.c
@@ -530,7 +530,7 @@ int mpath_prout_reg(struct multipath *mpp,int rq_servact, int rq_scope,
memcpy(&thread[i].param.paramp->key, &thread[i].param.paramp->sa_key, 8);
memset(&thread[i].param.paramp->sa_key, 0, 8);
thread[i].param.status = MPATH_PR_SUCCESS;
- rc = pthread_create(&thread[i].id, &attr, mpath_prout_pthread_fn,
+ rc = pthread_create(&thread[i].id, &attr, mpath_prout_pthread_fn,
(void *)(&thread[i].param));
if (rc){
condlog (0, "%s: failed to create thread for rollback. %d", mpp->wwid, rc);
diff --git a/libmpathpersist/mpath_persistent_reserve_in.3 b/libmpathpersist/mpath_persistent_reserve_in.3
index c404e13..8601645 100644
--- a/libmpathpersist/mpath_persistent_reserve_in.3
+++ b/libmpathpersist/mpath_persistent_reserve_in.3
@@ -1,5 +1,5 @@
.\"
-.TH MPATH_PERSISTENT_RESERVE_IN 3 2011-04-08 "Linux Manpage"
+.TH MPATH_PERSISTENT_RESERVE_IN 3 2011-04-08 "Linux Manpage"
.SH NAME
mpath_persistent_reserve_in
.SH SYNOPSIS
@@ -34,10 +34,10 @@ sends PRIN command to the DM device and gets the response.
.I MPATH_PR_SUCCESS
.B if PR command successful
.br
-.I MPATH_PR_SYNTAX_ERROR
+.I MPATH_PR_SYNTAX_ERROR
.B if syntax error or invalid parameter
.br
-.I MPATH_PR_SENSE_NOT_READY
+.I MPATH_PR_SENSE_NOT_READY
.B if command fails with [sk,asc,ascq: 0x2,*,*]
.br
.I MPATH_PR_SENSE_MEDIUM_ERROR
@@ -61,14 +61,14 @@ sends PRIN command to the DM device and gets the response.
.I MPATH_PR_NO_SENSE
.B if command fails with [sk,asc,ascq: 0x0,*,*]
.br
-.I MPATH_PR_SENSE_MALFORMED
+.I MPATH_PR_SENSE_MALFORMED
.B if command fails with SCSI command malformed
.br
.I MPATH_PR_FILE_ERROR
.B if command fails while accessing file (device node) problems(e.g. not found)
.br
.I MPATH_PR_DMMP_ERROR
-.B if Device Mapper related error.(e.g Error in getting dm info)
+.B if Device Mapper related error.(e.g Error in getting dm info)
.br
.I MPATH_PR_OTHER
.B if other error/warning has occurred(e.g transport or driver error)
diff --git a/libmpathpersist/mpath_persistent_reserve_out.3 b/libmpathpersist/mpath_persistent_reserve_out.3
index f7f84ff..7e57d2b 100644
--- a/libmpathpersist/mpath_persistent_reserve_out.3
+++ b/libmpathpersist/mpath_persistent_reserve_out.3
@@ -1,5 +1,5 @@
.\"
-.TH MPATH_PERSISTENT_RESERVE_OUT 3 2011-04-08 "Linux Manpage"
+.TH MPATH_PERSISTENT_RESERVE_OUT 3 2011-04-08 "Linux Manpage"
.SH NAME
mpath_persistent_reserve_out
.SH SYNOPSIS
@@ -14,7 +14,7 @@ sends PR OUT command to the DM device and gets the response.
.br
.BI Parameters:
.br
-.I fd
+.I fd
.B The file descriptor of a multipath device. Input argument.
.br
.I rq_servact
@@ -43,10 +43,10 @@ sends PR OUT command to the DM device and gets the response.
.I MPATH_PR_SUCCESS
.B if PR command successful else returns any one of the status mentioned below
.br
-.I MPATH_PR_SYNTAX_ERROR
+.I MPATH_PR_SYNTAX_ERROR
.B if syntax error or invalid parameter
.br
-.I MPATH_PR_SENSE_NOT_READY
+.I MPATH_PR_SENSE_NOT_READY
.B if command fails with [sk,asc,ascq: 0x2,*,*]
.br
.I MPATH_PR_SENSE_MEDIUM_ERROR
@@ -70,7 +70,7 @@ sends PR OUT command to the DM device and gets the response.
.I MPATH_PR_NO_SENSE
.B if command fails with [sk,asc,ascq: 0x0,*,*]
.br
-.I MPATH_PR_SENSE_MALFORMED
+.I MPATH_PR_SENSE_MALFORMED
.B if command fails with SCSI command malformed
.br
.I MPATH_PR_RESERV_CONFLICT
@@ -80,7 +80,7 @@ sends PR OUT command to the DM device and gets the response.
.B if command fails while accessing file (device node) problems(e.g. not found)
.br
.I MPATH_PR_DMMP_ERROR
-.B if Device Mapper related error.(e.g Error in getting dm info)
+.B if Device Mapper related error.(e.g Error in getting dm info)
.br
.I MPATH_PR_OTHER
.B if other error/warning has occurred(e.g transport or driver error)
diff --git a/libmpathpersist/mpath_pr_ioctl.c b/libmpathpersist/mpath_pr_ioctl.c
index c85fd10..5f80f66 100644
--- a/libmpathpersist/mpath_pr_ioctl.c
+++ b/libmpathpersist/mpath_pr_ioctl.c
@@ -64,7 +64,7 @@ int prout_do_scsi_ioctl(char * dev, int rq_servact, int rq_scope,
{
translen = format_transportids(paramp);
paramlen = 24 + translen;
- }
+ }
else
paramlen = 24;
@@ -75,7 +75,7 @@ int prout_do_scsi_ioctl(char * dev, int rq_servact, int rq_scope,
cdb[8] = (unsigned char)(paramlen & 0xff);
retry :
- condlog(3, "%s: rq_servact = %d", dev, rq_servact);
+ condlog(3, "%s: rq_servact = %d", dev, rq_servact);
condlog(3, "%s: rq_scope = %d ", dev, rq_scope);
condlog(3, "%s: rq_type = %d ", dev, rq_type);
condlog(3, "%s: paramlen = %d", dev, paramlen);
@@ -119,7 +119,7 @@ retry :
if (status == MPATH_PR_SENSE_UNIT_ATTENTION && (retry > 0))
{
--retry;
- condlog(2, "%s: retrying for Unit Attention. Remaining retries = %d",
+ condlog(2, "%s: retrying for Unit Attention. Remaining retries = %d",
dev, retry);
goto retry;
}
@@ -134,13 +134,13 @@ retry :
goto retry;
}
- close(fd);
+ close(fd);
return status;
}
uint32_t format_transportids(struct prout_param_descriptor *paramp)
{
- int i = 0, len;
+ int i = 0, len;
uint32_t buff_offset = 4;
memset(paramp->private_buffer, 0, MPATH_MAX_PARAM_LEN);
for (i=0; i < paramp->num_transportid; i++ )
@@ -163,20 +163,20 @@ uint32_t format_transportids(struct prout_param_descriptor *paramp)
break;
case MPATH_PROTOCOL_ID_ISCSI:
buff_offset += 1;
- len = (paramp->trnptid_list[i]->iscsi_name[1] & 0xff)+2;
+ len = (paramp->trnptid_list[i]->iscsi_name[1] & 0xff)+2;
memcpy(¶mp->private_buffer[buff_offset], ¶mp->trnptid_list[i]->iscsi_name,len);
- buff_offset += len ;
+ buff_offset += len ;
break;
}
}
- buff_offset -= 4;
+ buff_offset -= 4;
paramp->private_buffer[0] = (unsigned char)((buff_offset >> 24) & 0xff);
paramp->private_buffer[1] = (unsigned char)((buff_offset >> 16) & 0xff);
paramp->private_buffer[2] = (unsigned char)((buff_offset >> 8) & 0xff);
paramp->private_buffer[3] = (unsigned char)(buff_offset & 0xff);
- buff_offset += 4;
- return buff_offset;
+ buff_offset += 4;
+ return buff_offset;
}
void mpath_format_readkeys( struct prin_resp *pr_buff, int len, int noisy)
@@ -400,7 +400,7 @@ out:
int mpath_translate_response (char * dev, struct sg_io_hdr io_hdr, SenseData_t Sensedata, int noisy)
{
- condlog(3, "%s: status driver:%02x host:%02x scsi:%02x", dev,
+ condlog(3, "%s: status driver:%02x host:%02x scsi:%02x", dev,
io_hdr.driver_status, io_hdr.host_status ,io_hdr.status);
io_hdr.status &= 0x7e;
if ((0 == io_hdr.status) && (0 == io_hdr.host_status) &&
diff --git a/libmultipath/hwtable.c b/libmultipath/hwtable.c
index 66b5123..1c0ad06 100644
--- a/libmultipath/hwtable.c
+++ b/libmultipath/hwtable.c
@@ -11,7 +11,7 @@
/*
* Tuning suggestions on these parameters should go to
* dm-devel at redhat.com
- *
+ *
* You are welcome to claim maintainership over a controller
* family. Please mail the currently enlisted maintainer and
* the upstream package maintainer.
diff --git a/libmultipath/list.h b/libmultipath/list.h
index a0d8184..6d1e949 100644
--- a/libmultipath/list.h
+++ b/libmultipath/list.h
@@ -54,7 +54,7 @@ struct list_head {
} while (0)
/*
- * Insert a new entry between two known consecutive entries.
+ * Insert a new entry between two known consecutive entries.
*
* This is only for internal list manipulation where we know
* the prev/next entries already!
@@ -128,7 +128,7 @@ static inline void list_del(struct list_head *entry)
static inline void list_del_init(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
- INIT_LIST_HEAD(entry);
+ INIT_LIST_HEAD(entry);
}
/**
diff --git a/libmultipath/parser.h b/libmultipath/parser.h
index ba6859e..70697f4 100644
--- a/libmultipath/parser.h
+++ b/libmultipath/parser.h
@@ -1,10 +1,10 @@
-/*
+/*
* Soft: Keepalived is a failover program for the LVS project
* <www.linuxvirtualserver.org>. It monitor & manipulate
* a loadbalanced server pool using multi-layer checks.
- *
+ *
* Part: cfreader.c include file.
- *
+ *
* Version: $Id: parser.h,v 1.0.3 2003/05/11 02:28:03 acassen Exp $
*
* Author: Alexandre Cassen, <acassen at linux-vs.org>
diff --git a/libmultipath/pgpolicies.h b/libmultipath/pgpolicies.h
index 1f010a3..c0eaa7f 100644
--- a/libmultipath/pgpolicies.h
+++ b/libmultipath/pgpolicies.h
@@ -10,7 +10,7 @@
#define POLICY_NAME_SIZE 32
/* Storage controllers capabilities */
-enum iopolicies {
+enum iopolicies {
IOPOLICY_UNDEF,
FAILOVER,
MULTIBUS,
diff --git a/libmultipath/prioritizers/alua.c b/libmultipath/prioritizers/alua.c
index cd4aafc..90dfb71 100644
--- a/libmultipath/prioritizers/alua.c
+++ b/libmultipath/prioritizers/alua.c
@@ -9,7 +9,7 @@
*
* Author(s): Jan Kunigk
* S. Bader <shbader at de.ibm.com>
- *
+ *
* This file is released under the GPL.
*/
#include <stdio.h>
diff --git a/libmultipath/prioritizers/alua_rtpg.c b/libmultipath/prioritizers/alua_rtpg.c
index 636aae5..3293e4d 100644
--- a/libmultipath/prioritizers/alua_rtpg.c
+++ b/libmultipath/prioritizers/alua_rtpg.c
@@ -9,7 +9,7 @@
*
* Author(s): Jan Kunigk
* S. Bader <shbader at de.ibm.com>
- *
+ *
* This file is released under the GPL.
*/
#include <stdio.h>
diff --git a/libmultipath/prioritizers/alua_rtpg.h b/libmultipath/prioritizers/alua_rtpg.h
index 91a15a4..b1b177a 100644
--- a/libmultipath/prioritizers/alua_rtpg.h
+++ b/libmultipath/prioritizers/alua_rtpg.h
@@ -9,7 +9,7 @@
*
* Author(s): Jan Kunigk
* S. Bader <shbader at de.ibm.com>
- *
+ *
* This file is released under the GPL.
*/
#ifndef __RTPG_H__
diff --git a/libmultipath/prioritizers/alua_spc3.h b/libmultipath/prioritizers/alua_spc3.h
index e78b6c3..42d5ecf 100644
--- a/libmultipath/prioritizers/alua_spc3.h
+++ b/libmultipath/prioritizers/alua_spc3.h
@@ -9,7 +9,7 @@
*
* Author(s): Jan Kunigk
* S. Bader <shbader at de.ibm.com>
- *
+ *
* This file is released under the GPL.
*/
#ifndef __SPC3_H__
diff --git a/libmultipath/prioritizers/hds.c b/libmultipath/prioritizers/hds.c
index 8043b5b..6346c71 100644
--- a/libmultipath/prioritizers/hds.c
+++ b/libmultipath/prioritizers/hds.c
@@ -6,15 +6,15 @@
*
* Prioritizer for Device Mapper Multipath and HDS Storage
*
- * Hitachis Modular Storage contains two controllers for redundancy. The
- * Storage internal LUN (LDEV) will normally allocated via two pathes to the
- * server (one path per controller). For performance reasons should the server
+ * Hitachis Modular Storage contains two controllers for redundancy. The
+ * Storage internal LUN (LDEV) will normally allocated via two pathes to the
+ * server (one path per controller). For performance reasons should the server
* access to a LDEV only via one controller. The other path to the other
- * controller is stand-by. It is also possible to allocate more as one path
- * for a LDEV per controller. Here is active/active access allowed. The other
+ * controller is stand-by. It is also possible to allocate more as one path
+ * for a LDEV per controller. Here is active/active access allowed. The other
* pathes via the other controller are stand-by.
*
- * This prioritizer checks with inquiry command the represented LDEV and
+ * This prioritizer checks with inquiry command the represented LDEV and
* Controller number and gives back a priority followed by this scheme:
*
* CONTROLLER ODD and LDEV ODD: PRIORITY 1
@@ -22,19 +22,19 @@
* CONTROLLER EVEN and LDEV ODD: PRIORITY 0
* CONTROLLER EVEN and LDEV EVEN: PRIORITY 1
*
- * In the storage you can define for each LDEV a owner controller. If the
- * server makes IOs via the other controller the storage will switch the
- * ownership automatically. In this case you can see in the storage that the
+ * In the storage you can define for each LDEV a owner controller. If the
+ * server makes IOs via the other controller the storage will switch the
+ * ownership automatically. In this case you can see in the storage that the
* current controller is different from the default controller, but this is
* absolutely no problem.
*
- * With this prioritizer it is possible to establish a static load balancing.
- * Half of the LUNs are accessed via one HBA/storage controller and the other
+ * With this prioritizer it is possible to establish a static load balancing.
+ * Half of the LUNs are accessed via one HBA/storage controller and the other
* half via the other HBA/storage controller.
*
* In cluster environmemnts (RAC) it also guarantees that all cluster nodes have
* access to the LDEVs via the same controller.
- *
+ *
* You can run the prioritizer manually in verbose mode:
* # pp_hds_modular -v 8:224
* VENDOR: HITACHI
@@ -50,7 +50,7 @@
* Changes 2006-07-16:
* - Changed to forward declaration of functions
* - The switch-statement was changed to a logical expression
- * - unlinking of the devpath now also occurs at the end of
+ * - unlinking of the devpath now also occurs at the end of
* hds_modular_prio to avoid old /tmp/.pp_balance.%u.%u.devnode
* entries in /tmp-Directory
* - The for-statements for passing variables where changed to
diff --git a/libmultipath/prioritizers/iet.c b/libmultipath/prioritizers/iet.c
index 0bcc48b..c8f161b 100644
--- a/libmultipath/prioritizers/iet.c
+++ b/libmultipath/prioritizers/iet.c
@@ -16,7 +16,7 @@
// (It's a bit of a misnomer since supports the client side [eg. open-iscsi]
// instead of just "iet".)
//
-// Usage:
+// Usage:
// prio "iet"
// prio_args "preferredip=10.11.12.13"
//
diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
index 8abe360..4111fa5 100644
--- a/libmultipath/propsel.c
+++ b/libmultipath/propsel.c
@@ -422,7 +422,7 @@ out:
*/
if (!strncmp(prio_name(p), PRIO_ALUA, PRIO_NAME_LEN)) {
int tpgs = 0;
- if(!pp->tpgs &&
+ if(!pp->tpgs &&
(tpgs = get_target_port_group_support(pp->fd)) >= 0)
pp->tpgs = tpgs;
}
diff --git a/libmultipath/vector.h b/libmultipath/vector.h
index 7612b4c..5cfd4d0 100644
--- a/libmultipath/vector.h
+++ b/libmultipath/vector.h
@@ -1,10 +1,10 @@
-/*
+/*
* Soft: Keepalived is a failover program for the LVS project
* <www.linuxvirtualserver.org>. It monitor & manipulate
* a loadbalanced server pool using multi-layer checks.
- *
+ *
* Part: vector.c include file.
- *
+ *
* Version: $Id: vector.h,v 1.0.3 2003/05/11 02:28:03 acassen Exp $
*
* Author: Alexandre Cassen, <acassen at linux-vs.org>
diff --git a/mpathpersist/Makefile b/mpathpersist/Makefile
index 6f7a5cf..42a0830 100644
--- a/mpathpersist/Makefile
+++ b/mpathpersist/Makefile
@@ -2,9 +2,9 @@
#
include ../Makefile.inc
-OBJS = main.o
+OBJS = main.o
-CFLAGS += -I$(multipathdir) -I$(mpathpersistdir)
+CFLAGS += -I$(multipathdir) -I$(mpathpersistdir)
LDFLAGS += -lpthread -ldevmapper -L$(mpathpersistdir) -lmpathpersist -L$(multipathdir) -L$(mpathcmddir) -lmpathcmd -lmultipath -ludev
EXEC = mpathpersist
diff --git a/mpathpersist/main.c b/mpathpersist/main.c
index e3484b5..b80d3bc 100644
--- a/mpathpersist/main.c
+++ b/mpathpersist/main.c
@@ -29,12 +29,12 @@ static const char * pr_type_strs[] = {
};
int get_transportids_length(unsigned char * transportid_arr, int max_transportid, int num_transportids);
-void mpath_print_buf_readcap(struct prin_resp *pr_buff);
+void mpath_print_buf_readcap(struct prin_resp *pr_buff);
void mpath_print_buf_readfullstat(struct prin_resp *pr_buff);
void mpath_print_buf_readresv(struct prin_resp *pr_buff);
void mpath_print_buf_readkeys(struct prin_resp *pr_buff);
void dumpHex(const char* str, int len, int no_ascii);
-void * mpath_alloc_prin_response(int prin_sa);
+void * mpath_alloc_prin_response(int prin_sa);
void mpath_print_transport_id(struct prin_fulldescr *fdesc);
int construct_transportid(const char * inp, struct transportid transid[], int num_transportids);
@@ -236,7 +236,7 @@ int main (int argc, char * argv[])
break;
default:
- fprintf(stderr, "unrecognised switch " "code 0x%x ??\n", c);
+ fprintf(stderr, "unrecognised switch " "code 0x%x ??\n", c);
usage ();
ret = MPATH_PR_SYNTAX_ERROR;
goto out;
@@ -379,29 +379,29 @@ int main (int argc, char * argv[])
if (ret != MPATH_PR_SUCCESS )
{
fprintf (stderr, "Persistent Reserve IN command failed\n");
- goto out;
+ goto out;
}
switch(prin_sa)
- {
- case MPATH_PRIN_RKEY_SA:
- mpath_print_buf_readkeys(resp);
+ {
+ case MPATH_PRIN_RKEY_SA:
+ mpath_print_buf_readkeys(resp);
break;
- case MPATH_PRIN_RRES_SA:
+ case MPATH_PRIN_RRES_SA:
mpath_print_buf_readresv(resp);
break;
case MPATH_PRIN_RCAP_SA:
- mpath_print_buf_readcap(resp);
+ mpath_print_buf_readcap(resp);
break;
case MPATH_PRIN_RFSTAT_SA:
- mpath_print_buf_readfullstat(resp);
+ mpath_print_buf_readfullstat(resp);
break;
}
free(resp);
}
else if (prout)
{
- int j;
+ int j;
struct prout_param_descriptor *paramp;
paramp= malloc(sizeof(struct prout_param_descriptor) + (sizeof(struct transportid *)*(MPATH_MX_TIDS )));
@@ -423,7 +423,7 @@ int main (int argc, char * argv[])
if (param_aptpl)
paramp->sa_flags |= 0x1;
- if (num_transport)
+ if (num_transport)
{
paramp->sa_flags |= MPATH_F_SPEC_I_PT_MASK;
paramp->num_transportid = num_transport;
@@ -538,7 +538,7 @@ void mpath_print_buf_readresv( struct prin_resp *pr_buff)
{
int j, num, scope=0, type=0;
unsigned char *keyp;
- uint64_t prkey;
+ uint64_t prkey;
num = pr_buff->prin_descriptor.prin_readresv.additional_length / 8;
if (0 == num)
@@ -548,7 +548,7 @@ void mpath_print_buf_readresv( struct prin_resp *pr_buff)
}
else
printf(" PR generation=0x%x, Reservation follows:\n", pr_buff->prin_descriptor.prin_readresv.prgeneration);
- keyp = (unsigned char *)&pr_buff->prin_descriptor.prin_readkeys.key_list[0];
+ keyp = (unsigned char *)&pr_buff->prin_descriptor.prin_readkeys.key_list[0];
prkey = 0;
for (j = 0; j < 8; ++j) {
if (j > 0)
@@ -561,7 +561,7 @@ void mpath_print_buf_readresv( struct prin_resp *pr_buff)
scope = (pr_buff->prin_descriptor.prin_readresv.scope_type >> 4) & 0x0f;
type = pr_buff->prin_descriptor.prin_readresv.scope_type & 0x0f;
- if (scope == 0)
+ if (scope == 0)
printf(" scope = LU_SCOPE, type = %s", pr_type_strs[type]);
else
printf(" scope = %d, type = %s", scope, pr_type_strs[type]);
@@ -610,7 +610,7 @@ void mpath_print_buf_readfullstat( struct prin_resp *pr_buff)
uint16_t rel_pt_addr;
unsigned char * keyp;
- num = pr_buff->prin_descriptor.prin_readfd.number_of_descriptor;
+ num = pr_buff->prin_descriptor.prin_readfd.number_of_descriptor;
if (0 == num)
{
printf(" PR generation=0x%x \n", pr_buff->prin_descriptor.prin_readfd.prgeneration);
@@ -632,7 +632,7 @@ void mpath_print_buf_readfullstat( struct prin_resp *pr_buff)
}
printf(" Key = 0x%" PRIx64 "\n", prkey);
- if (pr_buff->prin_descriptor.prin_readfd.descriptors[i]->flag & 0x02)
+ if (pr_buff->prin_descriptor.prin_readfd.descriptors[i]->flag & 0x02)
printf(" All target ports bit set\n");
else {
printf(" All target ports bit clear\n");
@@ -705,7 +705,7 @@ mpath_print_transport_id(struct prin_fulldescr *fdesc)
case MPATH_PROTOCOL_ID_FC:
printf(" FCP-2 ");
if (0 != fdesc->trnptid.format_code)
- printf(" [Unexpected format code: %d]\n",
+ printf(" [Unexpected format code: %d]\n",
fdesc->trnptid.format_code);
dumpHex((const char *)fdesc->trnptid.n_port_name, 8, 0);
break;
diff --git a/mpathpersist/main.h b/mpathpersist/main.h
index 64686ec..84b10e0 100644
--- a/mpathpersist/main.h
+++ b/mpathpersist/main.h
@@ -18,7 +18,7 @@ static struct option long_options[] = {
{"register", 0, 0, 'G'},
{"register-ignore", 0, 0, 'I'},
{"release", 0, 0, 'L'},
- {"report-capabilities", 0, 0, 'c'},
+ {"report-capabilities", 0, 0, 'c'},
{"reserve", 0, 0, 'R'},
{"transport-id", 1, 0, 'X'},
{"alloc-length", 1, 0, 'l'},
diff --git a/multipath/01_udev b/multipath/01_udev
index 0f68996..c4e4c53 100755
--- a/multipath/01_udev
+++ b/multipath/01_udev
@@ -7,7 +7,7 @@ cp /bin/readlink $INITRDDIR/bin/
PROGS="/sbin/udev /sbin/udevstart /bin/mountpoint /bin/readlink"
LIBS=`ldd $PROGS | grep -v linux-gate.so | sort -u | \
-awk '{print $3}'`
+awk '{print $3}'`
for i in $LIBS
do
mkdir -p `dirname $INITRDDIR/$i`
diff --git a/multipath/02_multipath b/multipath/02_multipath
index 467a7cb..adf9e64 100755
--- a/multipath/02_multipath
+++ b/multipath/02_multipath
@@ -16,7 +16,7 @@ cp /bin/mountpoint $INITRDDIR/bin
PROGS="/lib/udev/scsi_id /bin/mountpoint"
LIBS=`ldd $PROGS | grep -v linux-gate.so | sort -u | \
-awk '{print $3}'`
+awk '{print $3}'`
for i in $LIBS
do
mkdir -p `dirname $INITRDDIR/$i`
diff --git a/multipath/multipath.conf.5 b/multipath/multipath.conf.5
index 2ff88c4..0c69b44 100644
--- a/multipath/multipath.conf.5
+++ b/multipath/multipath.conf.5
@@ -214,7 +214,7 @@ Generate the path priority for Hitachi HDS Modular storage arrays.
Generate a random priority between 1 and 10.
.TP 12
.B weightedpath
-Generate the path priority based on the regular expression and the
+Generate the path priority based on the regular expression and the
priority provided as argument. requires prio_args keyword.
.TP
Default value is \fBnone\fR.
@@ -345,12 +345,12 @@ for never stop queueing. If unset no queueing is attempted.
Default is unset.
.TP
.B user_friendly_names
-If set to
+If set to
.I yes
, using the bindings file
.I /etc/multipath/bindings
to assign a persistent and unique alias to the multipath, in the form of mpath<n>.
-If set to
+If set to
.I no
use the WWID as the alias. In either case this be will
be overridden by any specific aliases in the \fImultipaths\fR section.
diff --git a/multipathd/main.c b/multipathd/main.c
index 0eadd70..11c518d 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -292,7 +292,7 @@ sync_map_state(struct multipath *mpp)
vector_foreach_slot (mpp->pg, pgp, i){
vector_foreach_slot (pgp->paths, pp, j){
- if (pp->state == PATH_UNCHECKED ||
+ if (pp->state == PATH_UNCHECKED ||
pp->state == PATH_WILD ||
pp->state == PATH_DELAYED)
continue;
diff --git a/multipathd/multipathd.8 b/multipathd/multipathd.8
index 77f6e72..96a8fdb 100644
--- a/multipathd/multipathd.8
+++ b/multipathd/multipathd.8
@@ -7,14 +7,14 @@ multipathd \- multipath daemon
.RB [\| options \|]
.SH DESCRIPTION
-The
-.B multipathd
+The
+.B multipathd
daemon is in charge of checking for failed paths. When this happens,
-it will reconfigure the multipath map the path belongs to, so that this map
+it will reconfigure the multipath map the path belongs to, so that this map
regains its maximum performance and redundancy.
-This daemon executes the external multipath config tool when events occur.
-In turn, the multipath tool signals the multipathd daemon when it is done with
+This daemon executes the external multipath config tool when events occur.
+In turn, the multipath tool signals the multipathd daemon when it is done with
devmap reconfiguration, so that it can refresh its failed path list.
.SH OPTIONS
@@ -26,14 +26,14 @@ Foreground Mode. Don't daemonize, and print all messages to stdout and stderr.
Suppress timestamps. Do not prefix logging messages with a timestamp.
.TP
.B -v "level"
-Verbosity level. Print additional information while running multipathd. A level of 0 means only print errors. A level of 3 or greater prints debugging information as well.
+Verbosity level. Print additional information while running multipathd. A level of 0 means only print errors. A level of 3 or greater prints debugging information as well.
.TP
.B -B
Read-only bindings file. Multipathd will not write to the user_friendly_names
bindings file. If a user_friendly_name doesn't already exist for a device, it
will use its WWID as its alias.
.TP
-.B -k
+.B -k
multipathd will enter interactive mode. From this mode, the available commands can be viewed by entering "help". When you are finished entering commands, press CTRL-D to quit.
.TP
.B -n
@@ -45,14 +45,14 @@ wwid for the device is already listed in the wwids file.
The following commands can be used in interactive mode:
.TP
.B list|show paths
-Show the paths that multipathd is monitoring, and their state.
+Show the paths that multipathd is monitoring, and their state.
.TP
.B list|show paths format $format
Show the paths that multipathd is monitoring, using a format string with path
format wildcards.
.TP
.B list|show maps|multipaths
-Show the multipath devices that the multipathd is monitoring.
+Show the multipath devices that the multipathd is monitoring.
.TP
.B list|show maps|multipaths format $format
Show the status of all multipath devices that the multipathd is monitoring,
@@ -94,19 +94,19 @@ Show the current state of the multipathd daemon
.TP
.B add path $path
Add a path to the list of monitored paths. $path is as listed in /sys/block (e.g. sda).
-.TP
+.TP
.B remove|del path $path
Stop monitoring a path. $path is as listed in /sys/block (e.g. sda).
.TP
.B add map|multipath $map
-Add a multipath device to the list of monitored devices. $map can either be a device-mapper device as listed in /sys/block (e.g. dm-0) or it can be the alias for the multipath device (e.g. mpath1) or the uid of the multipath device (e.g. 36005076303ffc56200000000000010aa).
+Add a multipath device to the list of monitored devices. $map can either be a device-mapper device as listed in /sys/block (e.g. dm-0) or it can be the alias for the multipath device (e.g. mpath1) or the uid of the multipath device (e.g. 36005076303ffc56200000000000010aa).
.TP
.B remove|del map|multipath $map
Stop monitoring a multipath device.
.TP
.B resize map|multipath $map
Resizes map $map to the given size
-.TP
+.TP
.B switch|switchgroup map|multipath $map group $group
Force a multipath device to switch to a specific path group. $group is the path group index, starting with 1.
.TP
--
2.5.5
More information about the dm-devel
mailing list