[dm-devel] [PATCH v2 1/8] libmultipath: load_config: skip setting unnecessary defaults
Benjamin Marzinski
bmarzins at redhat.com
Tue Jun 20 16:25:03 UTC 2017
On Tue, Jun 20, 2017 at 04:36:47PM +0200, Hannes Reinecke wrote:
> On 06/20/2017 01:46 PM, Martin Wilck wrote:
> > We have the logic for setting defaults for paths and maps
> > in propsel.c. By pre-setting conf values with defaults in
> > load_config(), we generate irritating log messages like
> > 'features = "0" (setting: multipath.conf defaults/devices section)'
> > if multipath.conf doesn't contain a features setting at all.
> >
> > For some config settings, we need to use declare_def_snprint_defint()
> > now to make sure "multipathd show config" prints all defaults correctly.
> > To avoid confusion, we don't do this for "max_sectors", because
> > multipathd leaves this untouched by default.
> >
> > Signed-off-by: Martin Wilck <mwilck at suse.com>
> > ---
> > libmultipath/config.c | 16 ----------------
> > libmultipath/dict.c | 11 +++++++----
> > libmultipath/propsel.c | 5 +++++
> > 3 files changed, 12 insertions(+), 20 deletions(-)
> >
> > diff --git a/libmultipath/config.c b/libmultipath/config.c
> > index bb6619b3..61bbba91 100644
> > --- a/libmultipath/config.c
> > +++ b/libmultipath/config.c
> > @@ -599,40 +599,24 @@ load_config (char * file)
> > if (!conf->verbosity)
> > conf->verbosity = DEFAULT_VERBOSITY;
> >
> > - conf->minio = DEFAULT_MINIO;
> > - conf->minio_rq = DEFAULT_MINIO_RQ;
> > get_sys_max_fds(&conf->max_fds);
> > conf->bindings_file = set_default(DEFAULT_BINDINGS_FILE);
> > conf->wwids_file = set_default(DEFAULT_WWIDS_FILE);
> > conf->multipath_dir = set_default(DEFAULT_MULTIPATHDIR);
> > - conf->features = set_default(DEFAULT_FEATURES);
> > - conf->flush_on_last_del = DEFAULT_FLUSH;
> > conf->attribute_flags = 0;
> > conf->reassign_maps = DEFAULT_REASSIGN_MAPS;
> > conf->checkint = DEFAULT_CHECKINT;
> > conf->max_checkint = 0;
> > - conf->pgfailback = DEFAULT_FAILBACK;
> > - conf->fast_io_fail = DEFAULT_FAST_IO_FAIL;
> > - conf->retain_hwhandler = DEFAULT_RETAIN_HWHANDLER;
> > - conf->detect_prio = DEFAULT_DETECT_PRIO;
> > - conf->detect_checker = DEFAULT_DETECT_CHECKER;
> > conf->force_sync = DEFAULT_FORCE_SYNC;
> > conf->partition_delim = DEFAULT_PARTITION_DELIM;
> > conf->processed_main_config = 0;
> > conf->find_multipaths = DEFAULT_FIND_MULTIPATHS;
> > conf->uxsock_timeout = DEFAULT_REPLY_TIMEOUT;
> > - conf->uid_attribute = set_default(DEFAULT_UID_ATTRIBUTE);
> > conf->retrigger_tries = DEFAULT_RETRIGGER_TRIES;
> > conf->retrigger_delay = DEFAULT_RETRIGGER_DELAY;
> > conf->uev_wait_timeout = DEFAULT_UEV_WAIT_TIMEOUT;
> > - conf->deferred_remove = DEFAULT_DEFERRED_REMOVE;
> > - conf->skip_kpartx = DEFAULT_SKIP_KPARTX;
> > conf->disable_changed_wwids = DEFAULT_DISABLE_CHANGED_WWIDS;
> > conf->remove_retries = 0;
> > - conf->max_sectors_kb = DEFAULT_MAX_SECTORS_KB;
> > - conf->san_path_err_threshold = DEFAULT_ERR_CHECKS;
> > - conf->san_path_err_forget_rate = DEFAULT_ERR_CHECKS;
> > - conf->san_path_err_recovery_time = DEFAULT_ERR_CHECKS;
> >
> > /*
> > * preload default hwtable
> > diff --git a/libmultipath/dict.c b/libmultipath/dict.c
> > index 82066f67..9dc10904 100644
> > --- a/libmultipath/dict.c
> > +++ b/libmultipath/dict.c
> > @@ -630,7 +630,7 @@ print_fast_io_fail(char * buff, int len, void *ptr)
> > }
> >
> > declare_def_handler(fast_io_fail, set_fast_io_fail)
> > -declare_def_snprint(fast_io_fail, print_fast_io_fail)
> > +declare_def_snprint_defint(fast_io_fail, print_fast_io_fail, DEFAULT_FAST_IO_FAIL)
> > declare_ovr_handler(fast_io_fail, set_fast_io_fail)
> > declare_ovr_snprint(fast_io_fail, print_fast_io_fail)
> > declare_hw_handler(fast_io_fail, set_fast_io_fail)
> > @@ -1082,7 +1082,8 @@ declare_hw_snprint(delay_wait_checks, print_off_int_undef)
> > declare_mp_handler(delay_wait_checks, set_off_int_undef)
> > declare_mp_snprint(delay_wait_checks, print_off_int_undef)
> > declare_def_handler(san_path_err_threshold, set_off_int_undef)
> > -declare_def_snprint(san_path_err_threshold, print_off_int_undef)
> > +declare_def_snprint_defint(san_path_err_threshold, print_off_int_undef,
> > + DEFAULT_ERR_CHECKS)
> > declare_ovr_handler(san_path_err_threshold, set_off_int_undef)
> > declare_ovr_snprint(san_path_err_threshold, print_off_int_undef)
> > declare_hw_handler(san_path_err_threshold, set_off_int_undef)
> > @@ -1090,7 +1091,8 @@ declare_hw_snprint(san_path_err_threshold, print_off_int_undef)
> > declare_mp_handler(san_path_err_threshold, set_off_int_undef)
> > declare_mp_snprint(san_path_err_threshold, print_off_int_undef)
> > declare_def_handler(san_path_err_forget_rate, set_off_int_undef)
> > -declare_def_snprint(san_path_err_forget_rate, print_off_int_undef)
> > +declare_def_snprint_defint(san_path_err_forget_rate, print_off_int_undef,
> > + DEFAULT_ERR_CHECKS)
> > declare_ovr_handler(san_path_err_forget_rate, set_off_int_undef)
> > declare_ovr_snprint(san_path_err_forget_rate, print_off_int_undef)
> > declare_hw_handler(san_path_err_forget_rate, set_off_int_undef)
> > @@ -1098,7 +1100,8 @@ declare_hw_snprint(san_path_err_forget_rate, print_off_int_undef)
> > declare_mp_handler(san_path_err_forget_rate, set_off_int_undef)
> > declare_mp_snprint(san_path_err_forget_rate, print_off_int_undef)
> > declare_def_handler(san_path_err_recovery_time, set_off_int_undef)
> > -declare_def_snprint(san_path_err_recovery_time, print_off_int_undef)
> > +declare_def_snprint_defint(san_path_err_recovery_time, print_off_int_undef,
> > + DEFAULT_ERR_CHECKS)
> > declare_ovr_handler(san_path_err_recovery_time, set_off_int_undef)
> > declare_ovr_snprint(san_path_err_recovery_time, print_off_int_undef)
> > declare_hw_handler(san_path_err_recovery_time, set_off_int_undef)
> > diff --git a/libmultipath/propsel.c b/libmultipath/propsel.c
> > index 385063aa..68436433 100644
> > --- a/libmultipath/propsel.c
> > +++ b/libmultipath/propsel.c
> > @@ -752,6 +752,11 @@ int select_max_sectors_kb(struct config *conf, struct multipath * mp)
> > mp_set_ovr(max_sectors_kb);
> > mp_set_hwe(max_sectors_kb);
> > mp_set_conf(max_sectors_kb);
> > + mp_set_default(max_sectors_kb, DEFAULT_MAX_SECTORS_KB);
> > + /*
> > + * In the default case, we will not modify max_sectors_kb.
> > + * Don't print a log message to avoid user confusion.
> > + */
> > return 0;
> > out:
> > condlog(3, "%s: max_sectors_kb = %i %s", mp->alias, mp->max_sectors_kb,
> >
> Errm. You just set the default value, no?
> Care to clarify this comment?
The default value is "undefined". This isn't strictly necessary if all
the other code is correct, but in case mpp->max_sectors_kb was
previously set to something (or never zeroed out initially), this will
correctly set it back to undefined.
-Ben
>
> Cheers,
>
> Hannes
> --
> Dr. Hannes Reinecke Teamlead Storage & Networking
> hare at suse.de +49 911 74053 688
> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
> GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
> HRB 21284 (AG Nürnberg)
More information about the dm-devel
mailing list