[dm-devel] [PATCH] multipathd: check and cleanup zombie paths
Chongyun Wu
wu.chongyun at h3c.com
Fri Mar 9 06:11:31 UTC 2018
On 2018/3/8 23:54, Xose Vazquez Perez wrote:
> On 03/08/2018 09:03 AM, Chongyun Wu wrote:
>
> [add dm-devel at redhat.com]
>
>> 360002ac000000000000004f40001e2d7 dm-5 3PARdata,VV
>> size=13G features='1 queue_if_no_path' hwhandler='0' wp=rw
>> `-+- policy='round-robin 0' prio=1 status=active
>> |- 3:0:0:3 sdk 8:160 active ready running
>> |- 4:0:0:3 sdn 8:208 active ready running
>> |- 3:0:0:6 sdo 8:224 failed faulty running
>> `- 4:0:0:6 sdp 8:240 failed faulty running
> 3PAR arrays are able to use ALUA, but with *all ports*
> *across all controllers* in *single Target Port Group* :
>
> 31000000000000a000000000000001000 dm-0 3PARdata,VV
> size=50G features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw
> `-+- policy='service-time 0' prio=50 status=active
> |- 0:0:0:0 sda 8:0 active ready running
> |- 0:0:1:0 sdf 8:80 active ready running
> |- 1:0:0:0 sdk 8:160 active ready running
> `- 1:0:1:0 sdp 8:240 active ready running
>
> And it's recommended by the manufacturer.
>
>
> From the StoreServ Management Console "Host:" should be changed to
> "Generic-ALUA" "Persona 2" "(UARepLun, SESLun, ALUA)".
>
> multipath-tools( *upstream* ) is already configured by default to use ALUA
> with 3PARdata, since c1b7f7f7: https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=commitdiff;h=c1b7f7f7
>
> Run "multipath -d -v3" to see the config by lun.
>
Hi Xose Vazquez Perez,
Thanks for your reminding, I will check it, thanks again~
Regards,
Chongyun
More information about the dm-devel
mailing list