[dm-devel] [PATCH v3 1/2] md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone
NeilBrown
neilb at suse.de
Fri Aug 30 08:08:10 UTC 2019
On Thu, Aug 22 2019, Guilherme G. Piccoli wrote:
> Currently md raid0/linear are not provided with any mechanism to validate
> if an array member got removed or failed. The driver keeps sending BIOs
> regardless of the state of array members, and kernel shows state 'clean'
> in the 'array_state' sysfs attribute. This leads to the following
> situation: if a raid0/linear array member is removed and the array is
> mounted, some user writing to this array won't realize that errors are
> happening unless they check dmesg or perform one fsync per written file.
> Despite udev signaling the member device is gone, 'mdadm' cannot issue the
> STOP_ARRAY ioctl successfully, given the array is mounted.
>
> In other words, no -EIO is returned and writes (except direct ones) appear
> normal. Meaning the user might think the wrote data is correctly stored in
> the array, but instead garbage was written given that raid0 does stripping
> (and so, it requires all its members to be working in order to not corrupt
> data). For md/linear, writes to the available members will work fine, but
> if the writes go to the missing member(s), it'll cause a file corruption
> situation, whereas the portion of the writes to the missing devices aren't
> written effectively.
>
> This patch changes this behavior: we check if the block device's gendisk
> is UP when submitting the BIO to the array member, and if it isn't, we flag
> the md device as MD_BROKEN and fail subsequent I/Os to that device; a read
> request to the array requiring data from a valid member is still completed.
> While flagging the device as MD_BROKEN, we also show a rate-limited warning
> in the kernel log.
>
> A new array state 'broken' was added too: it mimics the state 'clean' in
> every aspect, being useful only to distinguish if the array has some member
> missing. We rely on the MD_BROKEN flag to put the array in the 'broken'
> state. This state cannot be written in 'array_state' as it just shows
> one or more members of the array are missing but acts like 'clean', it
> wouldn't make sense to write it.
>
> With this patch, the filesystem reacts much faster to the event of missing
> array member: after some I/O errors, ext4 for instance aborts the journal
> and prevents corruption. Without this change, we're able to keep writing
> in the disk and after a machine reboot, e2fsck shows some severe fs errors
> that demand fixing. This patch was tested in ext4 and xfs filesystems, and
> requires a 'mdadm' counterpart to handle the 'broken' state.
>
> Cc: NeilBrown <neilb at suse.com>
> Cc: Song Liu <songliubraving at fb.com>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli at canonical.com>
> ---
>
> v2 -> v3:
> * Rebased against md-next.
>
> * Merged both patches in a single one (thanks Song for the
> suggestion); now we fail BIOs and mark array as MD_BROKEN
> when a member is missing. We rely in the MD_BROKEN flag
> to set array to 'broken' state.
>
> * Function is_missing_dev() was removed due to the above.
>
> v1 -> v2:
> * Added handling for md/linear 'broken' state;
> * Check for is_missing_dev() instead of personality (thanks Neil for
> the suggestion);
> * Changed is_missing_dev() handlers to static;
> * Print rate-limited warning in case of more members go away, not only
> the first.
>
> Cover-letter from v1:
> lore.kernel.org/linux-block/20190729203135.12934-1-gpiccoli at canonical.com
>
>
> drivers/md/md-linear.c | 9 +++++++++
> drivers/md/md.c | 22 ++++++++++++++++++----
> drivers/md/md.h | 3 +++
> drivers/md/raid0.c | 10 ++++++++++
> 4 files changed, 40 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/md/md-linear.c b/drivers/md/md-linear.c
> index 7354466ddc90..0479ccdbdeeb 100644
> --- a/drivers/md/md-linear.c
> +++ b/drivers/md/md-linear.c
> @@ -258,6 +258,15 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)
> bio_sector < start_sector))
> goto out_of_bounds;
>
> + if (unlikely(!(tmp_dev->rdev->bdev->bd_disk->flags & GENHD_FL_UP))) {
> + if (!test_bit(MD_BROKEN, &mddev->flags))
> + pr_warn("md: %s: linear array has a missing/failed member\n",
> + mdname(mddev));
> + set_bit(MD_BROKEN, &mddev->flags);
It is a minor point, but I think this would look nicer as
if (!test_and_set_bit(MD_BROKEN, ....) { .. . }
> + bio_io_error(bio);
> + return true;
> + }
> +
> if (unlikely(bio_end_sector(bio) > end_sector)) {
> /* This bio crosses a device boundary, so we have to split it */
> struct bio *split = bio_split(bio, end_sector - bio_sector,
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index b46bb143e3c5..e7612033005f 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -376,6 +376,11 @@ static blk_qc_t md_make_request(struct request_queue *q, struct bio *bio)
> struct mddev *mddev = q->queuedata;
> unsigned int sectors;
>
> + if (unlikely(test_bit(MD_BROKEN, &mddev->flags)) && (rw == WRITE)) {
> + bio_io_error(bio);
> + return BLK_QC_T_NONE;
> + }
> +
> blk_queue_split(q, &bio);
>
> if (mddev == NULL || mddev->pers == NULL) {
> @@ -4158,12 +4163,17 @@ __ATTR_PREALLOC(resync_start, S_IRUGO|S_IWUSR,
> * active-idle
> * like active, but no writes have been seen for a while (100msec).
> *
> + * broken
> + * RAID0/LINEAR-only: same as clean, but array is missing a member.
> + * It's useful because RAID0/LINEAR mounted-arrays aren't stopped
> + * when a member is gone, so this state will at least alert the
> + * user that something is wrong.
> */
> enum array_state { clear, inactive, suspended, readonly, read_auto, clean, active,
> - write_pending, active_idle, bad_word};
> + write_pending, active_idle, broken, bad_word};
> static char *array_states[] = {
> "clear", "inactive", "suspended", "readonly", "read-auto", "clean", "active",
> - "write-pending", "active-idle", NULL };
> + "write-pending", "active-idle", "broken", NULL };
>
> static int match_word(const char *word, char **list)
> {
> @@ -4179,7 +4189,7 @@ array_state_show(struct mddev *mddev, char *page)
> {
> enum array_state st = inactive;
>
> - if (mddev->pers && !test_bit(MD_NOT_READY, &mddev->flags))
> + if (mddev->pers && !test_bit(MD_NOT_READY, &mddev->flags)) {
> switch(mddev->ro) {
> case 1:
> st = readonly;
> @@ -4199,7 +4209,10 @@ array_state_show(struct mddev *mddev, char *page)
> st = active;
> spin_unlock(&mddev->lock);
> }
> - else {
> +
> + if (unlikely(test_bit(MD_BROKEN, &mddev->flags)) && st == clean)
I prefer to keep "unlikely" for performance-sensitive code. This is not
performance sensitive.
Even without those changes:
Reviewed-by: NeilBrown <neilb at suse.de>
Thanks,
NeilBrown
> + st = broken;
> + } else {
> if (list_empty(&mddev->disks) &&
> mddev->raid_disks == 0 &&
> mddev->dev_sectors == 0)
> @@ -4313,6 +4326,7 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len)
> break;
> case write_pending:
> case active_idle:
> + case broken:
> /* these cannot be set */
> break;
> }
> diff --git a/drivers/md/md.h b/drivers/md/md.h
> index 1edcd967eb8e..240de65e15e8 100644
> --- a/drivers/md/md.h
> +++ b/drivers/md/md.h
> @@ -251,6 +251,9 @@ enum mddev_flags {
> MD_NOT_READY, /* do_md_run() is active, so 'array_state'
> * must not report that array is ready yet
> */
> + MD_BROKEN, /* This is used in RAID-0/LINEAR only, to stop
> + * I/O in case an array member is gone/failed.
> + */
> };
>
> enum mddev_sb_flags {
> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
> index bf5cf184a260..7772f5350bf2 100644
> --- a/drivers/md/raid0.c
> +++ b/drivers/md/raid0.c
> @@ -586,6 +586,16 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
>
> zone = find_zone(mddev->private, §or);
> tmp_dev = map_sector(mddev, zone, sector, §or);
> +
> + if (unlikely(!(tmp_dev->bdev->bd_disk->flags & GENHD_FL_UP))) {
> + if (!test_bit(MD_BROKEN, &mddev->flags))
> + pr_warn("md: %s: raid0 array has a missing/failed member\n",
> + mdname(mddev));
> + set_bit(MD_BROKEN, &mddev->flags);
> + bio_io_error(bio);
> + return true;
> + }
> +
> bio_set_dev(bio, tmp_dev->bdev);
> bio->bi_iter.bi_sector = sector + zone->dev_start +
> tmp_dev->data_offset;
> --
> 2.22.0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/dm-devel/attachments/20190830/e8de11eb/attachment.sig>
More information about the dm-devel
mailing list