[dm-devel] [PATCH 01/15] multipathd: warn when configuration has been changed.
Martin Wilck
Martin.Wilck at suse.com
Fri Jan 17 15:45:34 UTC 2020
On Thu, 2020-01-16 at 20:18 -0600, Benjamin Marzinski wrote:
> It would be helpful if multipathd could log a message when
> multipath.conf or files in the config_dir have been written to, both
> so
> that it can be used to send a notification to users, and to help with
> determining after the fact if multipathd was running with an older
> config, when the logs of multipathd's behaviour don't match with the
> current multipath.conf.
>
> To do this, the multipathd uxlsnr thread now sets up inotify watches
> on
> both /etc/multipath.conf and the config_dir to watch if the files are
> deleted or closed after being opened for writing. In order to keep
> uxlsnr from polling repeatedly if the multipath.conf or the
> config_dir
> aren't present, it will only set up the watches once per reconfigure.
> However, since multipath.conf is far more likely to be replaced by a
> text editor than modified in place, if it gets removed, multipathd
> will
> immediately try to restart the watch on it (which will succeed if the
> file was simply replaced by a new copy). This does mean that if
> multipath.conf or the config_dir are actually removed and then later
> re-added, multipathd won't log any more messages for changes until
> the
> next reconfigure. But that seems like a fair trade-off to avoid
> repeatedly polling for files that aren't likely to appear.
>
> Signed-off-by: Benjamin Marzinski <bmarzins at redhat.com>
> ---
> libmultipath/config.h | 1 +
> multipathd/main.c | 1 +
> multipathd/uxlsnr.c | 134
> ++++++++++++++++++++++++++++++++++++++++--
> 3 files changed, 130 insertions(+), 6 deletions(-)
I know I reviewed this already, but this time I have some more remarks,
mostly style.
>
> diff --git a/libmultipath/config.h b/libmultipath/config.h
> index ffec3103..e69aa07c 100644
> --- a/libmultipath/config.h
> +++ b/libmultipath/config.h
> @@ -188,6 +188,7 @@ struct config {
> int find_multipaths_timeout;
> int marginal_pathgroups;
> unsigned int version[3];
> + unsigned int sequence_nr;
>
> char * multipath_dir;
> char * selector;
> diff --git a/multipathd/main.c b/multipathd/main.c
> index 34a57689..7b364cfe 100644
> --- a/multipathd/main.c
> +++ b/multipathd/main.c
> @@ -2618,6 +2618,7 @@ reconfigure (struct vectors * vecs)
> uxsock_timeout = conf->uxsock_timeout;
>
> old = rcu_dereference(multipath_conf);
> + conf->sequence_nr = old->sequence_nr + 1;
> rcu_assign_pointer(multipath_conf, conf);
> call_rcu(&old->rcu, rcu_free_config);
>
> diff --git a/multipathd/uxlsnr.c b/multipathd/uxlsnr.c
> index bc71679e..92d9a79a 100644
> --- a/multipathd/uxlsnr.c
> +++ b/multipathd/uxlsnr.c
> @@ -23,6 +23,7 @@
> #include <sys/time.h>
> #include <signal.h>
> #include <stdbool.h>
> +#include <sys/inotify.h>
> #include "checkers.h"
> #include "memory.h"
> #include "debug.h"
> @@ -51,6 +52,8 @@ struct client {
> LIST_HEAD(clients);
> pthread_mutex_t client_lock = PTHREAD_MUTEX_INITIALIZER;
> struct pollfd *polls;
> +int notify_fd = -1;
> +char *config_dir;
Nit: please declare these as static, as they are used only in this
file. Also, naming the variable differently, e.g. conf_dir, would
decrease the number of false hits when grepping for the variable name.
>
> static bool _socket_client_is_root(int fd);
>
> @@ -151,6 +154,8 @@ void uxsock_cleanup(void *arg)
> long ux_sock = (long)arg;
>
> close(ux_sock);
> + close(notify_fd);
> + free(config_dir);
>
> pthread_mutex_lock(&client_lock);
> list_for_each_entry_safe(client_loop, client_tmp, &clients,
> node) {
> @@ -162,6 +167,106 @@ void uxsock_cleanup(void *arg)
> free_polls();
> }
>
> +/* failing to set the watch descriptor is o.k. we just miss a
> warning
> + * message */
> +void reset_watch(int notify_fd, int *wds, unsigned int *sequence_nr)
This function could also be static.
> +{
> + struct config *conf;
> + int dir_reset = 0;
> + int conf_reset = 0;
> +
> + if (notify_fd == -1)
> + return;
> +
> + conf = get_multipath_config();
> + /* instead of repeatedly try to reset the inotify watch if
> + * the config directory or multipath.conf isn't there, just
> + * do it once per reconfigure */
> + if (*sequence_nr != conf->sequence_nr) {
> + *sequence_nr = conf->sequence_nr;
> + if (wds[0] == -1)
> + conf_reset = 1;
> + if (!config_dir || !conf->config_dir ||
> + strcmp(config_dir, conf->config_dir)) {
> + dir_reset = 1;
> + if (config_dir)
> + free(config_dir);
> + if (conf->config_dir)
> + config_dir = strdup(conf->config_dir);
> + else
> + config_dir = NULL;
> + } else if (wds[1] == -1)
> + dir_reset = 1;
> + }
> + put_multipath_config(conf);
> +
> + if (dir_reset) {
> + if (wds[1] != -1) {
> + inotify_rm_watch(notify_fd, wds[1]);
> + wds[1] = -1;
> + }
> + if (config_dir) {
> + wds[1] = inotify_add_watch(notify_fd,
> config_dir,
> + IN_CLOSE_WRITE |
> IN_DELETE |
> + IN_ONLYDIR);
> + if (wds[1] == -1)
> + condlog(3, "didn't set up notifications
> on %s: %s", config_dir, strerror(errno));
Another nitpick: IMO we should be using "%m" for this in new code.
> + }
> + }
> + if (conf_reset) {
> + wds[0] = inotify_add_watch(notify_fd,
> DEFAULT_CONFIGFILE,
> + IN_CLOSE_WRITE);
> + if (wds[0] == -1)
> + condlog(3, "didn't set up notifications on
> /etc/multipath.conf: %s", strerror(errno));
> + }
> + return;
> +}
> +
> +void handle_inotify(int fd, int *wds)
Again, static.
> +{
> + char buff[1024]
> + __attribute__ ((aligned(__alignof__(struct
> inotify_event))));
> + const struct inotify_event *event;
> + ssize_t len;
> + char *ptr;
> + int i, got_notify = 0;
> +
> + for (;;) {
> + len = read(fd, buff, sizeof(buff));
> + if (len <= 0) {
> + if (len < 0 && errno != EAGAIN) {
> + condlog(3, "error reading from
> inotify_fd");
> + for (i = 0; i < 2; i++) {
> + if (wds[i] != -1) {
> + inotify_rm_watch(fd,
> wds[i]);
> + wds[i] = -1;
> + }
> + }
> + }
> + break;
> + }
> +
> + got_notify = 1;
> + for (ptr = buff; ptr < buff + len;
> + ptr += sizeof(struct inotify_event) + event->len)
> {
> + event = (const struct inotify_event *) ptr;
> +
> + if (event->mask & IN_IGNORED) {
> + /* multipathd.conf may have been
> overwritten.
> + * Try once to reset the notification
> */
> + if (wds[0] == event->wd)
> + wds[0] =
> inotify_add_watch(notify_fd,
> + DEFAULT_CONFIGF
> ILE,
> + IN_CLOSE_WRITE)
> ;
> + else if (wds[1] == event->wd)
> + wds[1] = -1;
> + }
> + }
> + }
> + if (got_notify)
> + condlog(1, "Multipath configuration updated.\nReload
> multipathd for changes to take effect");
> +}
> +
> /*
> * entry point
> */
> @@ -173,13 +278,19 @@ void * uxsock_listen(uxsock_trigger_fn
> uxsock_trigger, long ux_sock,
> char *reply;
> sigset_t mask;
> int old_clients = MIN_POLLS;
> + /* conf->sequence_nr will be 1 when uxsock_listen is first
> called */
> + unsigned int sequence_nr = 0;
> + int wds[2] = { -1, -1 };
Style issue: The code might be better readable if we used a struct for
this,
struct watch_descriptors {
int conf_wd;
int dir_wd;
};
--
Dr. Martin Wilck <mwilck at suse.com>, Tel. +49 (0)911 74053 2107
SUSE Software Solutions Germany GmbH
HRB 36809, AG Nürnberg GF: Felix
Imendörffer
More information about the dm-devel
mailing list