[dm-devel] [PATCH v2] dm table: Fix zoned model check and zone sectors check
Damien Le Moal
Damien.LeMoal at wdc.com
Tue Mar 16 06:14:14 UTC 2021
On 2021/03/16 13:36, Shin'ichiro Kawasaki wrote:
> Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device
> capability checks") triggered dm table load failure when dm-zoned device
> is set up for zoned block devices and a regular device for cache.
>
> The commit inverted logic of two callback functions for iterate_devices:
> device_is_zoned_model() and device_matches_zone_sectors(). The logic of
> device_is_zoned_model() was inverted then all destination devices of all
> targets in dm table are required to have the expected zoned model. This
> is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
> since each target has only one destination device. However, this results
> in failure for dm-zoned with regular cache device since that target has
> both regular block device and zoned block devices.
>
> As for device_matches_zone_sectors(), the commit inverted the logic to
> require all zoned block devices in each target have the specified
> zone_sectors. This check also fails for regular block device which does
> not have zones.
>
> To avoid the check failures, fix the zone model check and the zone
> sectors check. For zone model check, introduce the new feature flag
> DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
> target has this flag, allow it to have destination devices with any
> zoned model. For zone sectors check, skip the check if the destination
> device is not a zoned block device. Also add comments and improve an
> error message to clarify expectations to the two checks.
>
> Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks")
> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki at wdc.com>
> Signed-off-by: Damien Le Moal <damien.lemoal at wdc.com>
> ---
> Changes from v1:
> * Added DM_TARGET_MIXED_ZONED_MODEL feature for zoned model check of dm-zoned
>
> drivers/md/dm-table.c | 34 ++++++++++++++++++++++++++--------
> drivers/md/dm-zoned-target.c | 2 +-
> include/linux/device-mapper.h | 15 ++++++++++++++-
> 3 files changed, 41 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
> index 95391f78b8d5..cc73d5b473eb 100644
> --- a/drivers/md/dm-table.c
> +++ b/drivers/md/dm-table.c
> @@ -1594,6 +1594,13 @@ static int device_not_zoned_model(struct dm_target *ti, struct dm_dev *dev,
> return blk_queue_zoned_model(q) != *zoned_model;
> }
>
> +/*
> + * Check the device zoned model based on the target feature flag. If the target
> + * has the DM_TARGET_ZONED_HM feature flag set, host-managed zoned devices are
> + * also accepted but all devices must have the same zoned model. If the target
> + * has the DM_TARGET_MIXED_ZONED_MODEL feature set, the devices can have any
> + * zoned model with all zoned devices having the same zone size.
> + */
> static bool dm_table_supports_zoned_model(struct dm_table *t,
> enum blk_zoned_model zoned_model)
> {
> @@ -1603,13 +1610,16 @@ static bool dm_table_supports_zoned_model(struct dm_table *t,
> for (i = 0; i < dm_table_get_num_targets(t); i++) {
> ti = dm_table_get_target(t, i);
>
> - if (zoned_model == BLK_ZONED_HM &&
> - !dm_target_supports_zoned_hm(ti->type))
> - return false;
> -
> - if (!ti->type->iterate_devices ||
> - ti->type->iterate_devices(ti, device_not_zoned_model, &zoned_model))
> - return false;
> + if (dm_target_supports_zoned_hm(ti->type)) {
> + if (!ti->type->iterate_devices ||
> + ti->type->iterate_devices(ti,
> + device_not_zoned_model,
> + &zoned_model))
> + return false;
> + } else if (!dm_target_supports_mixed_zoned_model(ti->type)) {
> + if (zoned_model == BLK_ZONED_HM)
> + return false;
> + }
> }
>
> return true;
> @@ -1621,9 +1631,17 @@ static int device_not_matches_zone_sectors(struct dm_target *ti, struct dm_dev *
> struct request_queue *q = bdev_get_queue(dev->bdev);
> unsigned int *zone_sectors = data;
>
> + if (!blk_queue_is_zoned(q))
> + return 0;
> +
> return blk_queue_zone_sectors(q) != *zone_sectors;
> }
>
> +/*
> + * Check consistency of zoned model and zone sectors across all targets. For
> + * zone sectors, if the destination device is a zoned block device, it shall
> + * have the specified zone_sectors.
> + */
> static int validate_hardware_zoned_model(struct dm_table *table,
> enum blk_zoned_model zoned_model,
> unsigned int zone_sectors)
> @@ -1642,7 +1660,7 @@ static int validate_hardware_zoned_model(struct dm_table *table,
> return -EINVAL;
>
> if (dm_table_any_dev_attr(table, device_not_matches_zone_sectors, &zone_sectors)) {
> - DMERR("%s: zone sectors is not consistent across all devices",
> + DMERR("%s: zone sectors is not consistent across all zoned devices",
> dm_device_name(table->md));
> return -EINVAL;
> }
> diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c
> index 697f9de37355..7e88df64d197 100644
> --- a/drivers/md/dm-zoned-target.c
> +++ b/drivers/md/dm-zoned-target.c
> @@ -1143,7 +1143,7 @@ static int dmz_message(struct dm_target *ti, unsigned int argc, char **argv,
> static struct target_type dmz_type = {
> .name = "zoned",
> .version = {2, 0, 0},
> - .features = DM_TARGET_SINGLETON | DM_TARGET_ZONED_HM,
> + .features = DM_TARGET_SINGLETON | DM_TARGET_MIXED_ZONED_MODEL,
Thinking about it, DM_TARGET_SINGLETON is wrong for dm-zoned now that we can
create devices using multiple devices... But it does not seem to matter much
since it really looks like this flag is totally unused/unchecked by DM core.
Maybe something we can remove in a followup cleanup ? Mike ?
> .module = THIS_MODULE,
> .ctr = dmz_ctr,
> .dtr = dmz_dtr,
> diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
> index 7f4ac87c0b32..5c641f930caf 100644
> --- a/include/linux/device-mapper.h
> +++ b/include/linux/device-mapper.h
> @@ -253,7 +253,11 @@ struct target_type {
> #define dm_target_passes_integrity(type) ((type)->features & DM_TARGET_PASSES_INTEGRITY)
>
> /*
> - * Indicates that a target supports host-managed zoned block devices.
> + * Indicates support for zoned block devices:
> + * - DM_TARGET_ZONED_HM: the target also supports host-managed zoned
> + * block devices but does not support combining different zoned models.
> + * - DM_TARGET_MIXED_ZONED_MODEL: the target supports combining multiple
> + * devices with different zoned models.
> */
> #ifdef CONFIG_BLK_DEV_ZONED
> #define DM_TARGET_ZONED_HM 0x00000040
> @@ -275,6 +279,15 @@ struct target_type {
> #define DM_TARGET_PASSES_CRYPTO 0x00000100
> #define dm_target_passes_crypto(type) ((type)->features & DM_TARGET_PASSES_CRYPTO)
>
> +#ifdef CONFIG_BLK_DEV_ZONED
> +#define DM_TARGET_MIXED_ZONED_MODEL 0x00000200
> +#define dm_target_supports_mixed_zoned_model(type) \
> + ((type)->features & DM_TARGET_MIXED_ZONED_MODEL)
> +#else
> +#define DM_TARGET_MIXED_ZONED_MODEL 0x00000000
> +#define dm_target_supports_mixed_zoned_model(type) (false)
> +#endif
> +
> struct dm_target {
> struct dm_table *table;
> struct target_type *type;
>
--
Damien Le Moal
Western Digital Research
More information about the dm-devel
mailing list