[edk2-devel] [Patch v4 2/2] UefiCpuPkg/PiSmmCpuDxeSmm: Enable MM MP Protocol.
Dong, Eric
eric.dong at intel.com
Mon Jul 8 14:01:30 UTC 2019
v4 changes:
1. Use link list to save the token info.
v3 changes:
1. Fix Token clean up too early caused CheckProcedure return error.
v2 changes:
1. Remove some duplicated global variables.
2. Enhance token design to support multiple task trig for different APs at the same time.
V1 changes:
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1937
Add MM Mp Protocol in PiSmmCpuDxeSmm driver.
Cc: Ray Ni <ray.ni at intel.com>
Cc: Laszlo Ersek <lersek at redhat.com>
Signed-off-by: Eric Dong <eric.dong at intel.com>
---
UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c | 558 ++++++++++++++++++-
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c | 16 +
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 175 +++++-
UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf | 3 +
UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c | 376 +++++++++++++
UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.h | 286 ++++++++++
6 files changed, 1392 insertions(+), 22 deletions(-)
create mode 100644 UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c
create mode 100644 UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.h
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
index 64fb4d6344..8652ae1696 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c
@@ -22,6 +22,8 @@ UINTN mSemaphoreSize;
SPIN_LOCK *mPFLock = NULL;
SMM_CPU_SYNC_MODE mCpuSmmSyncMode;
BOOLEAN mMachineCheckSupported = FALSE;
+PROCEDURE_WRAPPER *mApWrapperFunc;
+LIST_ENTRY gTokenList;
/**
Performs an atomic compare exchange operation to get semaphore.
@@ -347,6 +349,128 @@ ReplaceOSMtrrs (
MtrrSetAllMtrrs (&gSmiMtrrs);
}
+/**
+ Wheck whether task has been finished by all APs.
+
+ @param BlockMode Whether did it in block mode or non-block mode.
+
+ @retval TRUE Task has been finished by all APs.
+ @retval FALSE Task not has been finished by all APs.
+
+**/
+BOOLEAN
+WaitForAllAPsNotBusy (
+ IN BOOLEAN BlockMode
+ )
+{
+ UINTN Index;
+
+ for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ //
+ // Ignore BSP and APs which not call in SMM.
+ //
+ if ((Index == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) || (!*(mSmmMpSyncData->CpuData[Index].Present))) {
+ continue;
+ }
+
+ if (BlockMode) {
+ AcquireSpinLock(mSmmMpSyncData->CpuData[Index].Busy);
+ ReleaseSpinLock(mSmmMpSyncData->CpuData[Index].Busy);
+ } else {
+ if (AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[Index].Busy)) {
+ ReleaseSpinLock(mSmmMpSyncData->CpuData[Index].Busy);
+ } else {
+ return FALSE;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ Check whether execute in single AP or all APs.
+
+ Compare two Tokens used by different APs to know whether in StartAllAps call.
+
+ Whether is an valid AP base on AP's Present flag.
+
+ @retval TRUE IN StartAllAps call.
+ @retval FALSE Not in StartAllAps call.
+
+**/
+BOOLEAN
+InStartAllApsCall (
+ VOID
+ )
+{
+ UINTN ApIndex;
+ UINTN ApIndex2;
+
+ for (ApIndex = mMaxNumberOfCpus; ApIndex-- > 0;) {
+ if ((ApIndex != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) &&
+ *(mSmmMpSyncData->CpuData[ApIndex].Present) &&
+ (mSmmMpSyncData->CpuData[ApIndex].Token != NULL)) {
+ for (ApIndex2 = ApIndex; ApIndex2-- > 0;) {
+ if ((ApIndex2 != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) &&
+ *(mSmmMpSyncData->CpuData[ApIndex2].Present) &&
+ (mSmmMpSyncData->CpuData[ApIndex2].Token != NULL)) {
+ return mSmmMpSyncData->CpuData[ApIndex2].Token == mSmmMpSyncData->CpuData[ApIndex].Token;
+ }
+ }
+ }
+ }
+
+ return FALSE;
+}
+
+/**
+ Clean up the status flags used during executing the procedure.
+
+ @param CpuIndex The AP index which calls this function.
+
+**/
+VOID
+ReleaseToken (
+ IN UINTN CpuIndex
+ )
+{
+ UINTN Index;
+ BOOLEAN Released;
+
+ if (InStartAllApsCall ()) {
+ //
+ // In Start All APs mode, make sure all APs have finished task.
+ //
+ if (WaitForAllAPsNotBusy (FALSE)) {
+ //
+ // Clean the flags update in the function call.
+ //
+ Released = FALSE;
+ for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ //
+ // Only In SMM APs need to be clean up.
+ //
+ if (mSmmMpSyncData->CpuData[Index].Present && mSmmMpSyncData->CpuData[Index].Token != NULL) {
+ if (!Released) {
+ ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Token);
+ Released = TRUE;
+ }
+ mSmmMpSyncData->CpuData[Index].Token = NULL;
+ }
+ }
+ }
+ } else {
+ //
+ // In single AP mode.
+ //
+ if (mSmmMpSyncData->CpuData[CpuIndex].Token != NULL) {
+ ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Token);
+ mSmmMpSyncData->CpuData[CpuIndex].Token = NULL;
+ }
+ }
+}
+
/**
SMI handler for BSP.
@@ -476,12 +600,7 @@ BSPHandler (
//
// Make sure all APs have completed their pending none-block tasks
//
- for (Index = mMaxNumberOfCpus; Index-- > 0;) {
- if (Index != CpuIndex && *(mSmmMpSyncData->CpuData[Index].Present)) {
- AcquireSpinLock (mSmmMpSyncData->CpuData[Index].Busy);
- ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Busy);
- }
- }
+ WaitForAllAPsNotBusy (TRUE);
//
// Perform the remaining tasks
@@ -604,6 +723,7 @@ APHandler (
UINT64 Timer;
UINTN BspIndex;
MTRR_SETTINGS Mtrrs;
+ EFI_STATUS ProcedureStatus;
//
// Timeout BSP
@@ -730,14 +850,19 @@ APHandler (
//
// Invoke the scheduled procedure
//
- (*mSmmMpSyncData->CpuData[CpuIndex].Procedure) (
- (VOID*)mSmmMpSyncData->CpuData[CpuIndex].Parameter
- );
+ ProcedureStatus = (*mSmmMpSyncData->CpuData[CpuIndex].Procedure) (
+ (VOID*)mSmmMpSyncData->CpuData[CpuIndex].Parameter
+ );
+ if (mSmmMpSyncData->CpuData[CpuIndex].Status != NULL) {
+ *mSmmMpSyncData->CpuData[CpuIndex].Status = ProcedureStatus;
+ }
//
// Release BUSY
//
ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);
+
+ ReleaseToken (CpuIndex);
}
if (SmmCpuFeaturesNeedConfigureMtrrs()) {
@@ -906,13 +1031,136 @@ Gen4GPageTable (
return (UINT32)(UINTN)PageTable;
}
+/**
+ Checks whether the input token is the current used token.
+
+ @param[in] Token This parameter describes the token that was passed into DispatchProcedure or
+ BroadcastProcedure.
+
+ @retval TRUE The input token is the current used token.
+ @retval FALSE The input token is not the current used token.
+**/
+BOOLEAN
+IsTokenInUse (
+ IN SPIN_LOCK *Token
+ )
+{
+ LIST_ENTRY *Link;
+ PROCEDURE_TOKEN *ProcToken;
+
+ if (Token == NULL) {
+ return FALSE;
+ }
+
+ for (Link = gTokenList.ForwardLink; Link != &gTokenList; Link = Link->ForwardLink) {
+ ProcToken = PROCEDURE_TOKEN_FROM_LINK (Link);
+
+ if (ProcToken->ProcedureToken == Token) {
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/**
+ Insert the token to the maintained list.
+
+ @param[in] Token This parameter describes the token that was passed into DispatchProcedure or
+ BroadcastProcedure.
+
+**/
+VOID
+InsertToken (
+ IN SPIN_LOCK *Token
+ )
+{
+ PROCEDURE_TOKEN *ProcToken;
+
+ ProcToken = AllocatePool (sizeof (PROCEDURE_TOKEN));
+ ASSERT (ProcToken != NULL);
+
+ ProcToken->Signature = PROCEDURE_TOKEN_SIGNATURE;
+ ProcToken->ProcedureToken = Token;
+
+ InsertTailList (&gTokenList, &ProcToken->Link);
+}
+
+/**
+ Free the tokens in the maintained list.
+
+**/
+VOID
+FreeToken (
+ VOID
+ )
+{
+ LIST_ENTRY *Link;
+ PROCEDURE_TOKEN *ProcToken;
+
+ while (!IsListEmpty (&gTokenList)) {
+ Link = GetFirstNode (&gTokenList);
+ ProcToken = PROCEDURE_TOKEN_FROM_LINK (Link);
+
+ RemoveEntryList (&ProcToken->Link);
+
+ FreePool ((VOID *)ProcToken->ProcedureToken);
+ FreePool (ProcToken);
+ }
+}
+
+/**
+ Checks status of specified AP.
+
+ This function checks whether the specified AP has finished the task assigned
+ by StartupThisAP(), and whether timeout expires.
+
+ @param[in] Token This parameter describes the token that was passed into DispatchProcedure or
+ BroadcastProcedure.
+
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
+**/
+EFI_STATUS
+IsApReady (
+ IN SPIN_LOCK *Token
+ )
+{
+ if (AcquireSpinLockOrFail (Token)) {
+ ReleaseSpinLock (Token);
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_READY;
+}
+
/**
Schedule a procedure to run on the specified CPU.
@param[in] Procedure The address of the procedure to run
@param[in] CpuIndex Target CPU Index
- @param[in, out] ProcArguments The parameter to pass to the procedure
- @param[in] BlockingMode Startup AP in blocking mode or not
+ @param[in,out] ProcArguments The parameter to pass to the procedure
+ @param[in] Token This is an optional parameter that allows the caller to execute the
+ procedure in a blocking or non-blocking fashion. If it is NULL the
+ call is blocking, and the call will not return until the AP has
+ completed the procedure. If the token is not NULL, the call will
+ return immediately. The caller can check whether the procedure has
+ completed with CheckOnProcedure or WaitForProcedure.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for the APs to finish
+ execution of Procedure, either for blocking or non-blocking mode.
+ Zero means infinity. If the timeout expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. If
+ the timeout expires in blocking mode, the call returns EFI_TIMEOUT.
+ If the timeout expires in non-blocking mode, the timeout determined
+ can be through CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an implementation
+ supports this feature can be determined via the Attributes data
+ member.
+ @param[in,out] CpuStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
@retval EFI_INVALID_PARAMETER CpuNumber not valid
@retval EFI_INVALID_PARAMETER CpuNumber specifying BSP
@@ -923,10 +1171,12 @@ Gen4GPageTable (
**/
EFI_STATUS
InternalSmmStartupThisAp (
- IN EFI_AP_PROCEDURE Procedure,
- IN UINTN CpuIndex,
- IN OUT VOID *ProcArguments OPTIONAL,
- IN BOOLEAN BlockingMode
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN CpuIndex,
+ IN OUT VOID *ProcArguments OPTIONAL,
+ IN SPIN_LOCK *Token,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT EFI_STATUS *CpuStatus
)
{
if (CpuIndex >= gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus) {
@@ -952,24 +1202,195 @@ InternalSmmStartupThisAp (
}
return EFI_INVALID_PARAMETER;
}
+ if ((TimeoutInMicroseconds != 0) && ((mSmmMp.Attributes & EFI_MM_MP_TIMEOUT_SUPPORTED) == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (IsTokenInUse (Token)) {
+ return EFI_ALREADY_STARTED;
+ }
- if (BlockingMode) {
+ if (Token == NULL) {
AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);
} else {
if (!AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy)) {
- DEBUG((DEBUG_ERROR, "mSmmMpSyncData->CpuData[%d].Busy\n", CpuIndex));
- return EFI_INVALID_PARAMETER;
+ DEBUG((DEBUG_ERROR, "Can't acquire mSmmMpSyncData->CpuData[%d].Busy\n", CpuIndex));
+ ReleaseSpinLock (Token);
+ return EFI_NOT_READY;
}
+
+ AcquireSpinLock (Token);
+ InsertToken (Token);
}
mSmmMpSyncData->CpuData[CpuIndex].Procedure = Procedure;
mSmmMpSyncData->CpuData[CpuIndex].Parameter = ProcArguments;
+ mSmmMpSyncData->CpuData[CpuIndex].Token = Token;
+ mSmmMpSyncData->CpuData[CpuIndex].Status = CpuStatus;
+ if (mSmmMpSyncData->CpuData[CpuIndex].Status != NULL) {
+ *mSmmMpSyncData->CpuData[CpuIndex].Status = EFI_NOT_READY;
+ }
+
ReleaseSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);
- if (BlockingMode) {
+ if (Token == NULL) {
AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);
ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);
}
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Worker function to execute a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in,out] ProcedureArguments The parameter passed into Procedure for
+ all APs.
+ @param[in,out] Token This is an optional parameter that allows the caller to execute the
+ procedure in a blocking or non-blocking fashion. If it is NULL the
+ call is blocking, and the call will not return until the AP has
+ completed the procedure. If the token is not NULL, the call will
+ return immediately. The caller can check whether the procedure has
+ completed with CheckOnProcedure or WaitForProcedure.
+ @param[in,out] CPUStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
+
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval others Failed to Startup all APs.
+
+**/
+EFI_STATUS
+InternalSmmStartupAllAPs (
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT SPIN_LOCK *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ )
+{
+ UINTN Index;
+ UINTN CpuCount;
+
+ if ((TimeoutInMicroseconds != 0) && ((mSmmMp.Attributes & EFI_MM_MP_TIMEOUT_SUPPORTED) == 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (Procedure == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (IsTokenInUse (Token)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ CpuCount = 0;
+ for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ if (*mSmmMpSyncData->CpuData[Index].Present && (Index != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu)) {
+ CpuCount ++;
+
+ if (gSmmCpuPrivate->Operation[Index] == SmmCpuRemove) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!AcquireSpinLockOrFail(mSmmMpSyncData->CpuData[Index].Busy)) {
+ return EFI_NOT_READY;
+ }
+ ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Busy);
+ }
+ }
+ if (CpuCount == 0) {
+ return EFI_NOT_STARTED;
+ }
+
+ //
+ // Make sure all BUSY should be acquired.
+ //
+ // Because former code already check mSmmMpSyncData->CpuData[***].Busy for each AP.
+ // Here code always use AcquireSpinLock instead of AcquireSpinLockOrFail for not
+ // block mode.
+ //
+ for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ if (Index != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu && *(mSmmMpSyncData->CpuData[Index].Present)) {
+ AcquireSpinLock (mSmmMpSyncData->CpuData[Index].Busy);
+ }
+ }
+
+ if (Token != NULL) {
+ AcquireSpinLock (Token);
+ InsertToken (Token);
+ }
+
+ for (Index = mMaxNumberOfCpus; Index-- > 0;) {
+ if (Index != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu && *(mSmmMpSyncData->CpuData[Index].Present)) {
+ mSmmMpSyncData->CpuData[Index].Procedure = (EFI_AP_PROCEDURE2) Procedure;
+ mSmmMpSyncData->CpuData[Index].Parameter = ProcedureArguments;
+ mSmmMpSyncData->CpuData[Index].Token = Token;
+ if (CPUStatus != NULL) {
+ mSmmMpSyncData->CpuData[Index].Status = &CPUStatus[Index];
+ if (mSmmMpSyncData->CpuData[Index].Status != NULL) {
+ *mSmmMpSyncData->CpuData[Index].Status = EFI_NOT_READY;
+ }
+ }
+ } else {
+ //
+ // PI spec requirement:
+ // For every excluded processor, the array entry must contain a value of EFI_NOT_STARTED.
+ //
+ if (CPUStatus != NULL) {
+ CPUStatus[Index] = EFI_NOT_STARTED;
+ }
+ }
+ }
+
+ ReleaseAllAPs ();
+
+ if (Token == NULL) {
+ //
+ // Make sure all APs have completed their tasks.
+ //
+ WaitForAllAPsNotBusy (TRUE);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ ISO C99 6.5.2.2 "Function calls", paragraph 9:
+ If the function is defined with a type that is not compatible with
+ the type (of the expression) pointed to by the expression that
+ denotes the called function, the behavior is undefined.
+
+ So add below wrapper function to convert between EFI_AP_PROCEDURE
+ and EFI_AP_PROCEDURE2.
+
+ Wrapper for Procedures.
+
+ @param[in] Buffer Pointer to PROCEDURE_WRAPPER buffer.
+
+**/
+EFI_STATUS
+EFIAPI
+ProcedureWrapper (
+ IN OUT VOID *Buffer
+ )
+{
+ PROCEDURE_WRAPPER *Wrapper;
+
+ Wrapper = Buffer;
+ Wrapper->Procedure (Wrapper->ProcedureArgument);
+
return EFI_SUCCESS;
}
@@ -995,7 +1416,18 @@ SmmBlockingStartupThisAp (
IN OUT VOID *ProcArguments OPTIONAL
)
{
- return InternalSmmStartupThisAp(Procedure, CpuIndex, ProcArguments, TRUE);
+ PROCEDURE_WRAPPER Wrapper;
+ EFI_STATUS Status;
+
+ Wrapper.Procedure = Procedure;
+ Wrapper.ProcedureArgument = ProcArguments;
+
+ //
+ // Use wrapper function to convert EFI_AP_PROCEDURE to EFI_AP_PROCEDURE2.
+ //
+ Status = InternalSmmStartupThisAp (ProcedureWrapper, CpuIndex, &Wrapper, NULL, 0, NULL);
+
+ return Status;
}
/**
@@ -1020,7 +1452,28 @@ SmmStartupThisAp (
IN OUT VOID *ProcArguments OPTIONAL
)
{
- return InternalSmmStartupThisAp(Procedure, CpuIndex, ProcArguments, FeaturePcdGet (PcdCpuSmmBlockStartupThisAp));
+ SPIN_LOCK *CpuToken;
+ UINTN SpinLockSize;
+
+ mApWrapperFunc[CpuIndex].Procedure = Procedure;
+ mApWrapperFunc[CpuIndex].ProcedureArgument = ProcArguments;
+
+ if (FeaturePcdGet (PcdCpuSmmBlockStartupThisAp)) {
+ CpuToken = NULL;
+ } else {
+ SpinLockSize = GetSpinLockProperties ();
+ CpuToken = AllocatePool (SpinLockSize);
+ ASSERT (CpuToken != NULL);
+ if (CpuToken == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ InitializeSpinLock ((SPIN_LOCK *)(CpuToken));
+ }
+
+ //
+ // Use wrapper function to convert EFI_AP_PROCEDURE to EFI_AP_PROCEDURE2.
+ //
+ return InternalSmmStartupThisAp (ProcedureWrapper, CpuIndex, &mApWrapperFunc[CpuIndex], CpuToken, 0, NULL);
}
/**
@@ -1112,6 +1565,13 @@ SmiRendezvous (
Cr2 = 0;
SaveCr2 (&Cr2);
+ //
+ // Call the user register Startup function first.
+ //
+ if (mSmmMpSyncData->StartupProcedure != NULL) {
+ mSmmMpSyncData->StartupProcedure (mSmmMpSyncData->StartupProcArgs);
+ }
+
//
// Perform CPU specific entry hooks
//
@@ -1250,12 +1710,31 @@ SmiRendezvous (
Exit:
SmmCpuFeaturesRendezvousExit (CpuIndex);
+ if (CpuIndex == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) {
+ FreeToken ();
+ }
+
//
// Restore Cr2
//
RestoreCr2 (Cr2);
}
+/**
+ Allocate buffer for SpinLock and Wrapper function buffer.
+
+**/
+VOID
+InitializeDataForMmMp (
+ VOID
+ )
+{
+ mApWrapperFunc = AllocatePool (sizeof (PROCEDURE_WRAPPER) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);
+ ASSERT (mApWrapperFunc != NULL);
+
+ InitializeListHead (&gTokenList);
+}
+
/**
Allocate buffer for all semaphores and spin locks.
@@ -1469,3 +1948,40 @@ RegisterSmmEntry (
gSmmCpuPrivate->SmmCoreEntry = SmmEntryPoint;
return EFI_SUCCESS;
}
+
+/**
+
+ Register the SMM Foundation entry point.
+
+ @param[in] Procedure A pointer to the code stream to be run on the designated target AP
+ of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2
+ with the related definitions of
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.
+ If caller may pass a value of NULL to deregister any existing
+ startup procedure.
+ @param[in] ProcedureArguments Allows the caller to pass a list of parameters to the code that is
+ run by the AP. It is an optional common mailbox between APs and
+ the caller to share information
+
+ @retval EFI_SUCCESS The Procedure has been set successfully.
+ @retval EFI_INVALID_PARAMETER The Procedure is NULL but ProcedureArguments not NULL.
+
+**/
+EFI_STATUS
+RegisterStartupProcedure (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN VOID *ProcedureArguments OPTIONAL
+ )
+{
+ if (Procedure == NULL && ProcedureArguments != NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (mSmmMpSyncData == NULL) {
+ return EFI_NOT_READY;
+ }
+
+ mSmmMpSyncData->StartupProcedure = Procedure;
+ mSmmMpSyncData->StartupProcArgs = ProcedureArguments;
+
+ return EFI_SUCCESS;
+}
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c
index 2f7d777ee7..bb9b0822f8 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c
@@ -996,6 +996,22 @@ PiCpuSmmEntry (
);
ASSERT_EFI_ERROR (Status);
+ //
+ // Initialize global buffer for MM MP.
+ //
+ InitializeDataForMmMp ();
+
+ //
+ // Install the SMM Mp Protocol into SMM protocol database
+ //
+ Status = gSmst->SmmInstallProtocolInterface (
+ &mSmmCpuHandle,
+ &gEfiMmMpProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mSmmMp
+ );
+ ASSERT_EFI_ERROR (Status);
+
//
// Expose address of CPU Hot Plug Data structure if CPU hot plug is supported.
//
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
index 2bb35a424d..eb7e38ea94 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
@@ -20,6 +20,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
#include <Protocol/SmmReadyToLock.h>
#include <Protocol/SmmCpuService.h>
#include <Protocol/SmmMemoryAttribute.h>
+#include <Protocol/MmMp.h>
#include <Guid/AcpiS3Context.h>
#include <Guid/MemoryAttributesTable.h>
@@ -221,11 +222,31 @@ typedef struct {
EFI_SMM_CONFIGURATION_PROTOCOL SmmConfiguration;
} SMM_CPU_PRIVATE_DATA;
+//
+// Wrapper used to convert EFI_AP_PROCEDURE2 and EFI_AP_PROCEDURE.
+//
+typedef struct {
+ EFI_AP_PROCEDURE Procedure;
+ VOID *ProcedureArgument;
+} PROCEDURE_WRAPPER;
+
+#define PROCEDURE_TOKEN_SIGNATURE SIGNATURE_32 ('P', 'R', 'T', 'S')
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link;
+
+ SPIN_LOCK *ProcedureToken;
+} PROCEDURE_TOKEN;
+
+#define PROCEDURE_TOKEN_FROM_LINK(a) CR (a, PROCEDURE_TOKEN, Link, PROCEDURE_TOKEN_SIGNATURE)
+
extern SMM_CPU_PRIVATE_DATA *gSmmCpuPrivate;
extern CPU_HOT_PLUG_DATA mCpuHotPlugData;
extern UINTN mMaxNumberOfCpus;
extern UINTN mNumberOfCpus;
extern EFI_SMM_CPU_PROTOCOL mSmmCpu;
+extern EFI_MM_MP_PROTOCOL mSmmMp;
///
/// The mode of the CPU at the time an SMI occurs
@@ -363,10 +384,12 @@ SmmRelocationSemaphoreComplete (
///
typedef struct {
SPIN_LOCK *Busy;
- volatile EFI_AP_PROCEDURE Procedure;
+ volatile EFI_AP_PROCEDURE2 Procedure;
volatile VOID *Parameter;
volatile UINT32 *Run;
volatile BOOLEAN *Present;
+ SPIN_LOCK *Token;
+ EFI_STATUS *Status;
} SMM_CPU_DATA_BLOCK;
typedef enum {
@@ -388,6 +411,8 @@ typedef struct {
volatile SMM_CPU_SYNC_MODE EffectiveSyncMode;
volatile BOOLEAN SwitchBsp;
volatile BOOLEAN *CandidateBsp;
+ EFI_AP_PROCEDURE StartupProcedure;
+ VOID *StartupProcArgs;
} SMM_DISPATCHER_MP_SYNC_DATA;
#define SMM_PSD_OFFSET 0xfb00
@@ -410,6 +435,7 @@ typedef struct {
SPIN_LOCK *Busy;
volatile UINT32 *Run;
volatile BOOLEAN *Present;
+ SPIN_LOCK *Token;
} SMM_CPU_SEMAPHORE_CPU;
///
@@ -1259,4 +1285,151 @@ RestoreCr2 (
IN UINTN Cr2
);
+/**
+ Schedule a procedure to run on the specified CPU.
+
+ @param[in] Procedure The address of the procedure to run
+ @param[in] CpuIndex Target CPU Index
+ @param[in,out] ProcArguments The parameter to pass to the procedure
+ @param[in,out] Token This is an optional parameter that allows the caller to execute the
+ procedure in a blocking or non-blocking fashion. If it is NULL the
+ call is blocking, and the call will not return until the AP has
+ completed the procedure. If the token is not NULL, the call will
+ return immediately. The caller can check whether the procedure has
+ completed with CheckOnProcedure or WaitForProcedure.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for the APs to finish
+ execution of Procedure, either for blocking or non-blocking mode.
+ Zero means infinity. If the timeout expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. If
+ the timeout expires in blocking mode, the call returns EFI_TIMEOUT.
+ If the timeout expires in non-blocking mode, the timeout determined
+ can be through CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an implementation
+ supports this feature can be determined via the Attributes data
+ member.
+ @param[in,out] CPUStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
+
+ @retval EFI_INVALID_PARAMETER CpuNumber not valid
+ @retval EFI_INVALID_PARAMETER CpuNumber specifying BSP
+ @retval EFI_INVALID_PARAMETER The AP specified by CpuNumber did not enter SMM
+ @retval EFI_INVALID_PARAMETER The AP specified by CpuNumber is busy
+ @retval EFI_SUCCESS The procedure has been successfully scheduled
+
+**/
+EFI_STATUS
+InternalSmmStartupThisAp (
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN CpuIndex,
+ IN OUT VOID *ProcArguments OPTIONAL,
+ IN SPIN_LOCK *Token,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT EFI_STATUS *CpuStatus
+ );
+
+/**
+ Checks whether the input token is the current used token.
+
+ @param[in] Token This parameter describes the token that was passed into DispatchProcedure or
+ BroadcastProcedure.
+
+ @retval TRUE The input token is the current used token.
+ @retval FALSE The input token is not the current used token.
+**/
+BOOLEAN
+IsTokenInUse (
+ IN SPIN_LOCK *Token
+ );
+
+/**
+ Checks status of specified AP.
+
+ This function checks whether the specified AP has finished the task assigned
+ by StartupThisAP(), and whether timeout expires.
+
+ @param[in] Token This parameter describes the token that was passed into DispatchProcedure or
+ BroadcastProcedure.
+
+ @retval EFI_SUCCESS Specified AP has finished task assigned by StartupThisAPs().
+ @retval EFI_NOT_READY Specified AP has not finished task and timeout has not expired.
+**/
+EFI_STATUS
+IsApReady (
+ IN SPIN_LOCK *Token
+ );
+
+/**
+ Worker function to execute a caller provided function on all enabled APs.
+
+ @param[in] Procedure A pointer to the function to be run on
+ enabled APs of the system.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for
+ APs to return from Procedure, either for
+ blocking or non-blocking mode.
+ @param[in,out] ProcedureArgument The parameter passed into Procedure for
+ all APs.
+ @param[in,out] Token This is an optional parameter that allows the caller to execute the
+ procedure in a blocking or non-blocking fashion. If it is NULL the
+ call is blocking, and the call will not return until the AP has
+ completed the procedure. If the token is not NULL, the call will
+ return immediately. The caller can check whether the procedure has
+ completed with CheckOnProcedure or WaitForProcedure.
+ @param[in,out] CPUStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before
+ the timeout expired.
+ @retval EFI_SUCCESS In non-blocking mode, function has been dispatched
+ to all enabled APs.
+ @retval others Failed to Startup all APs.
+
+**/
+EFI_STATUS
+InternalSmmStartupAllAPs (
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT SPIN_LOCK *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ );
+
+/**
+
+ Register the SMM Foundation entry point.
+
+ @param[in] Procedure A pointer to the code stream to be run on the designated target AP
+ of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2
+ with the related definitions of
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.
+ If caller may pass a value of NULL to deregister any existing
+ startup procedure.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code that is
+ run by the AP. It is an optional common mailbox between APs and
+ the caller to share information
+
+ @retval EFI_SUCCESS The Procedure has been set successfully.
+ @retval EFI_INVALID_PARAMETER The Procedure is NULL but ProcedureArguments not NULL.
+
+**/
+EFI_STATUS
+RegisterStartupProcedure (
+ IN EFI_AP_PROCEDURE Procedure,
+ IN VOID *ProcedureArguments OPTIONAL
+ );
+
+/**
+ Allocate buffer for SpinLock and Wrapper function buffer.
+
+**/
+VOID
+InitializeDataForMmMp (
+ VOID
+ );
+
#endif
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
index 466c568d49..da0308c47f 100644
--- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
@@ -40,6 +40,8 @@
SmmProfileInternal.h
SmramSaveState.c
SmmCpuMemoryManagement.c
+ SmmMp.h
+ SmmMp.c
[Sources.Ia32]
Ia32/Semaphore.c
@@ -105,6 +107,7 @@
gEfiSmmReadyToLockProtocolGuid ## NOTIFY
gEfiSmmCpuServiceProtocolGuid ## PRODUCES
gEdkiiSmmMemoryAttributeProtocolGuid ## PRODUCES
+ gEfiMmMpProtocolGuid ## PRODUCES
[Guids]
gEfiAcpiVariableGuid ## SOMETIMES_CONSUMES ## HOB # it is used for S3 boot.
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c b/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c
new file mode 100644
index 0000000000..ac563ce02c
--- /dev/null
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.c
@@ -0,0 +1,376 @@
+/** @file
+SMM MP protocol implementation
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include "PiSmmCpuDxeSmm.h"
+#include "SmmMp.h"
+
+///
+/// SMM MP Protocol instance
+///
+EFI_MM_MP_PROTOCOL mSmmMp = {
+ EFI_MM_MP_PROTOCOL_REVISION,
+ 0,
+ SmmMpGetNumberOfProcessors,
+ SmmMpDispatchProcedure,
+ SmmMpBroadcastProcedure,
+ SmmMpSetStartupProcedure,
+ SmmMpCheckForProcedure,
+ SmmMpWaitForProcedure
+};
+
+/**
+ Service to retrieves the number of logical processor in the platform.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in the system,
+ including the BSP and all APs.
+
+ @retval EFI_SUCCESS The number of processors was retrieved successfully
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL
+**/
+EFI_STATUS
+EFIAPI
+SmmMpGetNumberOfProcessors (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors
+ )
+{
+ if (NumberOfProcessors == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *NumberOfProcessors = gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ This service allows the caller to invoke a procedure one of the application processors (AP). This
+ function uses an optional token parameter to support blocking and non-blocking modes. If the token
+ is passed into the call, the function will operate in a non-blocking fashion and the caller can
+ check for completion with CheckOnProcedure or WaitForProcedure.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the procedure to be run on the designated target
+ AP of the system. Type EFI_AP_PROCEDURE2 is defined below in
+ related definitions.
+ @param[in] CpuNumber The zero-based index of the processor number of the target
+ AP, on which the code stream is supposed to run. If the number
+ points to the calling processor then it will not run the
+ supplied code.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for this AP to
+ finish execution of Procedure, either for blocking or
+ non-blocking mode. Zero means infinity. If the timeout
+ expires before this AP returns from Procedure, then Procedure
+ on the AP is terminated. If the timeout expires in blocking
+ mode, the call returns EFI_TIMEOUT. If the timeout expires
+ in non-blocking mode, the timeout determined can be through
+ CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an
+ implementation supports this feature, can be determined via
+ the Attributes data member.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
+ that is run by the AP. It is an optional common mailbox
+ between APs and the caller to share information.
+ @param[in,out] Token This is parameter is broken into two components:
+ 1.Token->Completion is an optional parameter that allows the
+ caller to execute the procedure in a blocking or non-blocking
+ fashion. If it is NULL the call is blocking, and the call will
+ not return until the AP has completed the procedure. If the
+ token is not NULL, the call will return immediately. The caller
+ can check whether the procedure has completed with
+ CheckOnProcedure or WaitForProcedure.
+ 2.Token->Status The implementation updates the address pointed
+ at by this variable with the status code returned by Procedure
+ when it completes execution on the target AP, or with EFI_TIMEOUT
+ if the Procedure fails to complete within the optional timeout.
+ The implementation will update this variable with EFI_NOT_READY
+ prior to starting Procedure on the target AP
+ @param[in,out] CPUStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
+
+ @retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
+ execution on the target AP.
+ In the non-blocking case this indicates that the procedure has
+ been successfully scheduled for execution on the target AP.
+ @retval EFI_INVALID_PARAMETER The input arguments are out of range. Either the target AP is the
+ caller of the function, or the Procedure or Token is NULL
+ @retval EFI_NOT_READY If the target AP is busy executing another procedure
+ @retval EFI_ALREADY_STARTED Token is already in use for another procedure
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
+ has finished
+ @retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpDispatchProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN CpuNumber,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT MM_COMPLETION *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ )
+{
+ SPIN_LOCK *CpuToken;
+ UINTN SpinLockSize;
+
+ if (Token != NULL) {
+ SpinLockSize = GetSpinLockProperties ();
+ CpuToken = AllocatePool (SpinLockSize);
+ ASSERT (CpuToken != NULL);
+ if (CpuToken == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ InitializeSpinLock ((SPIN_LOCK *)(CpuToken));
+
+ *Token = (MM_COMPLETION)CpuToken;
+ }
+
+ return InternalSmmStartupThisAp (
+ Procedure,
+ CpuNumber,
+ ProcedureArguments,
+ Token != NULL ? CpuToken : NULL,
+ TimeoutInMicroseconds,
+ CPUStatus
+ );
+}
+
+/**
+ This service allows the caller to invoke a procedure on all running application processors (AP)
+ except the caller. This function uses an optional token parameter to support blocking and
+ nonblocking modes. If the token is passed into the call, the function will operate in a non-blocking
+ fashion and the caller can check for completion with CheckOnProcedure or WaitForProcedure.
+
+ It is not necessary for the implementation to run the procedure on every processor on the platform.
+ Processors that are powered down in such a way that they cannot respond to interrupts, may be
+ excluded from the broadcast.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the code stream to be run on the APs that have
+ entered MM. Type EFI_AP_PROCEDURE is defined below in related
+ definitions.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for the APs to finish
+ execution of Procedure, either for blocking or non-blocking mode.
+ Zero means infinity. If the timeout expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. If
+ the timeout expires in blocking mode, the call returns EFI_TIMEOUT.
+ If the timeout expires in non-blocking mode, the timeout determined
+ can be through CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an implementation
+ supports this feature can be determined via the Attributes data
+ member.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
+ that is run by the AP. It is an optional common mailbox
+ between APs and the caller to share information.
+ @param[in,out] Token This is parameter is broken into two components:
+ 1.Token->Completion is an optional parameter that allows the
+ caller to execute the procedure in a blocking or non-blocking
+ fashion. If it is NULL the call is blocking, and the call will
+ not return until the AP has completed the procedure. If the
+ token is not NULL, the call will return immediately. The caller
+ can check whether the procedure has completed with
+ CheckOnProcedure or WaitForProcedure.
+ 2.Token->Status The implementation updates the address pointed
+ at by this variable with the status code returned by Procedure
+ when it completes execution on the target AP, or with EFI_TIMEOUT
+ if the Procedure fails to complete within the optional timeout.
+ The implementation will update this variable with EFI_NOT_READY
+ prior to starting Procedure on the target AP
+ @param[in,out] CPUStatus This optional pointer may be used to get the individual status
+ returned by every AP that participated in the broadcast. This
+ parameter if used provides the base address of an array to hold
+ the EFI_STATUS value of each AP in the system. The size of the
+ array can be ascertained by the GetNumberOfProcessors function.
+ As mentioned above, the broadcast may not include every processor
+ in the system. Some implementations may exclude processors that
+ have been powered down in such a way that they are not responsive
+ to interrupts. Additionally the broadcast excludes the processor
+ which is making the BroadcastProcedure call. For every excluded
+ processor, the array entry must contain a value of EFI_NOT_STARTED
+
+ @retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
+ execution on the APs.
+ In the non-blocking case this indicates that the procedure has
+ been successfully scheduled for execution on the APs.
+ @retval EFI_INVALID_PARAMETER The Procedure or Token is NULL
+ @retval EFI_NOT_READY If the target AP is busy executing another procedure
+ @retval EFI_ALREADY_STARTED Token is already in use for another procedure
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
+ has finished.
+ @retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpBroadcastProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT MM_COMPLETION *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ )
+{
+ SPIN_LOCK *CpuToken;
+ UINTN SpinLockSize;
+
+ if (Token != NULL) {
+ SpinLockSize = GetSpinLockProperties ();
+ CpuToken = AllocatePool (SpinLockSize);
+ ASSERT (CpuToken != NULL);
+ if (CpuToken == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ InitializeSpinLock ((SPIN_LOCK *)(CpuToken));
+
+ *Token = (MM_COMPLETION)CpuToken;
+ }
+
+ return InternalSmmStartupAllAPs(
+ Procedure,
+ TimeoutInMicroseconds,
+ ProcedureArguments,
+ Token != NULL ? CpuToken : NULL,
+ CPUStatus
+ );
+}
+
+
+/**
+ This service allows the caller to set a startup procedure that will be executed when an AP powers
+ up from a state where core configuration and context is lost. The procedure is execution has the
+ following properties:
+ 1. The procedure executes before the processor is handed over to the operating system.
+ 2. All processors execute the same startup procedure.
+ 3. The procedure may run in parallel with other procedures invoked through the functions in this
+ protocol, or with processors that are executing an MM handler or running in the operating system.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the code stream to be run on the designated target AP
+ of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2
+ with the related definitions of
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.
+ If caller may pass a value of NULL to deregister any existing
+ startup procedure.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code that is
+ run by the AP. It is an optional common mailbox between APs and
+ the caller to share information
+
+ @retval EFI_SUCCESS The Procedure has been set successfully.
+ @retval EFI_INVALID_PARAMETER The Procedure is NULL but ProcedureArguments not NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpSetStartupProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN OUT VOID *ProcedureArguments OPTIONAL
+ )
+{
+ return RegisterStartupProcedure (Procedure, ProcedureArguments);
+}
+
+/**
+ When non-blocking execution of a procedure on an AP is invoked with DispatchProcedure,
+ via the use of a token, this function can be used to check for completion of the procedure on the AP.
+ The function takes the token that was passed into the DispatchProcedure call. If the procedure
+ is complete, and therefore it is now possible to run another procedure on the same AP, this function
+ returns EFI_SUCESS. In this case the status returned by the procedure that executed on the AP is
+ returned in the token's Status field. If the procedure has not yet completed, then this function
+ returns EFI_NOT_READY.
+
+ When a non-blocking execution of a procedure is invoked with BroadcastProcedure, via the
+ use of a token, this function can be used to check for completion of the procedure on all the
+ broadcast APs. The function takes the token that was passed into the BroadcastProcedure
+ call. If the procedure is complete on all broadcast APs this function returns EFI_SUCESS. In this
+ case the Status field in the token passed into the function reflects the overall result of the
+ invocation, which may be EFI_SUCCESS, if all executions succeeded, or the first observed failure.
+ If the procedure has not yet completed on the broadcast APs, the function returns
+ EFI_NOT_READY.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Token This parameter describes the token that was passed into
+ DispatchProcedure or BroadcastProcedure.
+
+ @retval EFI_SUCCESS Procedure has completed.
+ @retval EFI_NOT_READY The Procedure has not completed.
+ @retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
+ @retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpCheckForProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN MM_COMPLETION Token
+ )
+{
+ if (Token == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!IsTokenInUse ((SPIN_LOCK *)Token)) {
+ return EFI_NOT_FOUND;
+ }
+
+ return IsApReady ((SPIN_LOCK *)Token);
+}
+
+/**
+ When a non-blocking execution of a procedure on an AP is invoked via DispatchProcedure,
+ this function will block the caller until the remote procedure has completed on the designated AP.
+ The non-blocking procedure invocation is identified by the Token parameter, which must match the
+ token that used when DispatchProcedure was called. Upon completion the status returned by
+ the procedure that executed on the AP is used to update the token's Status field.
+
+ When a non-blocking execution of a procedure on an AP is invoked via BroadcastProcedure
+ this function will block the caller until the remote procedure has completed on all of the APs that
+ entered MM. The non-blocking procedure invocation is identified by the Token parameter, which
+ must match the token that used when BroadcastProcedure was called. Upon completion the
+ overall status returned by the procedures that executed on the broadcast AP is used to update the
+ token's Status field. The overall status may be EFI_SUCCESS, if all executions succeeded, or the
+ first observed failure.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Token This parameter describes the token that was passed into
+ DispatchProcedure or BroadcastProcedure.
+
+ @retval EFI_SUCCESS Procedure has completed.
+ @retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
+ @retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpWaitForProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN MM_COMPLETION Token
+ )
+{
+ EFI_STATUS Status;
+
+ do {
+ Status = SmmMpCheckForProcedure (This, Token);
+ } while (Status == EFI_NOT_READY);
+
+ return Status;
+}
+
diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.h b/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.h
new file mode 100644
index 0000000000..e0d823a4b1
--- /dev/null
+++ b/UefiCpuPkg/PiSmmCpuDxeSmm/SmmMp.h
@@ -0,0 +1,286 @@
+/** @file
+Include file for SMM MP protocol implementation.
+
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+
+SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef _SMM_MP_PROTOCOL_H_
+#define _SMM_MP_PROTOCOL_H_
+
+//
+// SMM MP Protocol function prototypes.
+//
+
+/**
+ Service to retrieves the number of logical processor in the platform.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in the system,
+ including the BSP and all APs.
+
+ @retval EFI_SUCCESS The number of processors was retrieved successfully
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL
+**/
+
+EFI_STATUS
+EFIAPI
+SmmMpGetNumberOfProcessors (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ OUT UINTN *NumberOfProcessors
+ );
+
+
+/**
+ This service allows the caller to invoke a procedure one of the application processors (AP). This
+ function uses an optional token parameter to support blocking and non-blocking modes. If the token
+ is passed into the call, the function will operate in a non-blocking fashion and the caller can
+ check for completion with CheckOnProcedure or WaitForProcedure.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the procedure to be run on the designated target
+ AP of the system. Type EFI_AP_PROCEDURE2 is defined below in
+ related definitions.
+ @param[in] CpuNumber The zero-based index of the processor number of the target
+ AP, on which the code stream is supposed to run. If the number
+ points to the calling processor then it will not run the
+ supplied code.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for this AP to
+ finish execution of Procedure, either for blocking or
+ non-blocking mode. Zero means infinity. If the timeout
+ expires before this AP returns from Procedure, then Procedure
+ on the AP is terminated. If the timeout expires in blocking
+ mode, the call returns EFI_TIMEOUT. If the timeout expires
+ in non-blocking mode, the timeout determined can be through
+ CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an
+ implementation supports this feature, can be determined via
+ the Attributes data member.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
+ that is run by the AP. It is an optional common mailbox
+ between APs and the caller to share information.
+ @param[in,out] Token This is parameter is broken into two components:
+ 1.Token->Completion is an optional parameter that allows the
+ caller to execute the procedure in a blocking or non-blocking
+ fashion. If it is NULL the call is blocking, and the call will
+ not return until the AP has completed the procedure. If the
+ token is not NULL, the call will return immediately. The caller
+ can check whether the procedure has completed with
+ CheckOnProcedure or WaitForProcedure.
+ 2.Token->Status The implementation updates the address pointed
+ at by this variable with the status code returned by Procedure
+ when it completes execution on the target AP, or with EFI_TIMEOUT
+ if the Procedure fails to complete within the optional timeout.
+ The implementation will update this variable with EFI_NOT_READY
+ prior to starting Procedure on the target AP
+ @param[in,out] CPUStatus This optional pointer may be used to get the status code returned
+ by Procedure when it completes execution on the target AP, or with
+ EFI_TIMEOUT if the Procedure fails to complete within the optional
+ timeout. The implementation will update this variable with
+ EFI_NOT_READY prior to starting Procedure on the target AP.
+
+ @retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
+ execution on the target AP.
+ In the non-blocking case this indicates that the procedure has
+ been successfully scheduled for execution on the target AP.
+ @retval EFI_INVALID_PARAMETER The input arguments are out of range. Either the target AP is the
+ caller of the function, or the Procedure or Token is NULL
+ @retval EFI_NOT_READY If the target AP is busy executing another procedure
+ @retval EFI_ALREADY_STARTED Token is already in use for another procedure
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
+ has finished
+ @retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpDispatchProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN CpuNumber,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT MM_COMPLETION *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ );
+
+/**
+ This service allows the caller to invoke a procedure on all running application processors (AP)
+ except the caller. This function uses an optional token parameter to support blocking and
+ nonblocking modes. If the token is passed into the call, the function will operate in a non-blocking
+ fashion and the caller can check for completion with CheckOnProcedure or WaitForProcedure.
+
+ It is not necessary for the implementation to run the procedure on every processor on the platform.
+ Processors that are powered down in such a way that they cannot respond to interrupts, may be
+ excluded from the broadcast.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the code stream to be run on the APs that have
+ entered MM. Type EFI_AP_PROCEDURE is defined below in related
+ definitions.
+ @param[in] TimeoutInMicroseconds Indicates the time limit in microseconds for the APs to finish
+ execution of Procedure, either for blocking or non-blocking mode.
+ Zero means infinity. If the timeout expires before all APs return
+ from Procedure, then Procedure on the failed APs is terminated. If
+ the timeout expires in blocking mode, the call returns EFI_TIMEOUT.
+ If the timeout expires in non-blocking mode, the timeout determined
+ can be through CheckOnProcedure or WaitForProcedure.
+ Note that timeout support is optional. Whether an implementation
+ supports this feature can be determined via the Attributes data
+ member.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code
+ that is run by the AP. It is an optional common mailbox
+ between APs and the caller to share information.
+ @param[in,out] Token This is parameter is broken into two components:
+ 1.Token->Completion is an optional parameter that allows the
+ caller to execute the procedure in a blocking or non-blocking
+ fashion. If it is NULL the call is blocking, and the call will
+ not return until the AP has completed the procedure. If the
+ token is not NULL, the call will return immediately. The caller
+ can check whether the procedure has completed with
+ CheckOnProcedure or WaitForProcedure.
+ 2.Token->Status The implementation updates the address pointed
+ at by this variable with the status code returned by Procedure
+ when it completes execution on the target AP, or with EFI_TIMEOUT
+ if the Procedure fails to complete within the optional timeout.
+ The implementation will update this variable with EFI_NOT_READY
+ prior to starting Procedure on the target AP
+ @param[in,out] CPUStatus This optional pointer may be used to get the individual status
+ returned by every AP that participated in the broadcast. This
+ parameter if used provides the base address of an array to hold
+ the EFI_STATUS value of each AP in the system. The size of the
+ array can be ascertained by the GetNumberOfProcessors function.
+ As mentioned above, the broadcast may not include every processor
+ in the system. Some implementations may exclude processors that
+ have been powered down in such a way that they are not responsive
+ to interrupts. Additionally the broadcast excludes the processor
+ which is making the BroadcastProcedure call. For every excluded
+ processor, the array entry must contain a value of EFI_NOT_STARTED
+
+ @retval EFI_SUCCESS In the blocking case, this indicates that Procedure has completed
+ execution on the APs.
+ In the non-blocking case this indicates that the procedure has
+ been successfully scheduled for execution on the APs.
+ @retval EFI_INVALID_PARAMETER The Procedure or Token is NULL
+ @retval EFI_NOT_READY If the target AP is busy executing another procedure
+ @retval EFI_ALREADY_STARTED Token is already in use for another procedure
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the specified AP
+ has finished
+ @retval EFI_OUT_OF_RESOURCES Could not allocate a required resource.
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpBroadcastProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE2 Procedure,
+ IN UINTN TimeoutInMicroseconds,
+ IN OUT VOID *ProcedureArguments OPTIONAL,
+ IN OUT MM_COMPLETION *Token,
+ IN OUT EFI_STATUS *CPUStatus
+ );
+
+
+/**
+ This service allows the caller to set a startup procedure that will be executed when an AP powers
+ up from a state where core configuration and context is lost. The procedure is execution has the
+ following properties:
+ 1. The procedure executes before the processor is handed over to the operating system.
+ 2. All processors execute the same startup procedure.
+ 3. The procedure may run in parallel with other procedures invoked through the functions in this
+ protocol, or with processors that are executing an MM handler or running in the operating system.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Procedure A pointer to the code stream to be run on the designated target AP
+ of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2
+ with the related definitions of
+ EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.
+ If caller may pass a value of NULL to deregister any existing
+ startup procedure.
+ @param[in,out] ProcedureArguments Allows the caller to pass a list of parameters to the code that is
+ run by the AP. It is an optional common mailbox between APs and
+ the caller to share information
+
+ @retval EFI_SUCCESS The Procedure has been set successfully.
+ @retval EFI_INVALID_PARAMETER The Procedure is NULL but ProcedureArguments not NULL.
+**/
+EFI_STATUS
+EFIAPI
+SmmMpSetStartupProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN OUT VOID *ProcedureArguments OPTIONAL
+ );
+
+/**
+ When non-blocking execution of a procedure on an AP is invoked with DispatchProcedure,
+ via the use of a token, this function can be used to check for completion of the procedure on the AP.
+ The function takes the token that was passed into the DispatchProcedure call. If the procedure
+ is complete, and therefore it is now possible to run another procedure on the same AP, this function
+ returns EFI_SUCESS. In this case the status returned by the procedure that executed on the AP is
+ returned in the token's Status field. If the procedure has not yet completed, then this function
+ returns EFI_NOT_READY.
+
+ When a non-blocking execution of a procedure is invoked with BroadcastProcedure, via the
+ use of a token, this function can be used to check for completion of the procedure on all the
+ broadcast APs. The function takes the token that was passed into the BroadcastProcedure
+ call. If the procedure is complete on all broadcast APs this function returns EFI_SUCESS. In this
+ case the Status field in the token passed into the function reflects the overall result of the
+ invocation, which may be EFI_SUCCESS, if all executions succeeded, or the first observed failure.
+ If the procedure has not yet completed on the broadcast APs, the function returns
+ EFI_NOT_READY.
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Token This parameter describes the token that was passed into
+ DispatchProcedure or BroadcastProcedure.
+
+ @retval EFI_SUCCESS Procedure has completed.
+ @retval EFI_NOT_READY The Procedure has not completed.
+ @retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
+ @retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpCheckForProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN MM_COMPLETION Token
+ );
+
+/**
+ When a non-blocking execution of a procedure on an AP is invoked via DispatchProcedure,
+ this function will block the caller until the remote procedure has completed on the designated AP.
+ The non-blocking procedure invocation is identified by the Token parameter, which must match the
+ token that used when DispatchProcedure was called. Upon completion the status returned by
+ the procedure that executed on the AP is used to update the token's Status field.
+
+ When a non-blocking execution of a procedure on an AP is invoked via BroadcastProcedure
+ this function will block the caller until the remote procedure has completed on all of the APs that
+ entered MM. The non-blocking procedure invocation is identified by the Token parameter, which
+ must match the token that used when BroadcastProcedure was called. Upon completion the
+ overall status returned by the procedures that executed on the broadcast AP is used to update the
+ token's Status field. The overall status may be EFI_SUCCESS, if all executions succeeded, or the
+ first observed failure.
+
+
+ @param[in] This The EFI_MM_MP_PROTOCOL instance.
+ @param[in] Token This parameter describes the token that was passed into
+ DispatchProcedure or BroadcastProcedure.
+
+ @retval EFI_SUCCESS Procedure has completed.
+ @retval EFI_INVALID_PARAMETER Token or Token->Completion is NULL
+ @retval EFI_NOT_FOUND Token is not currently in use for a non-blocking call
+
+**/
+EFI_STATUS
+EFIAPI
+SmmMpWaitForProcedure (
+ IN CONST EFI_MM_MP_PROTOCOL *This,
+ IN MM_COMPLETION Token
+ );
+
+#endif
--
2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#43401): https://edk2.groups.io/g/devel/message/43401
Mute This Topic: https://groups.io/mt/32392245/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list