[edk2-devel] [PATCH v1 07/11] ShellPkg: acpiview: MADT: Add error-checking in the parsing logic
Krzysztof Koch
krzysztof.koch at arm.com
Fri Jul 12 06:52:39 UTC 2019
1. Check if the global pointers (in the scope of this ACPI table parser)
have been successfully updated before they are later used to control
the parsing logic.
2. Give forward progress guarantee when parsing the MADT table. Report
an error if a MADT structure is too small to be valid. Without this
check, there is a possibility for the parser to enter an ifninite loop.
3. Test against buffer overruns.
4. Remove redundant forward function declarations by repositioning
blocks of code.
5. Allow silencing ACPI table content validation errors which do not
cause table parsing to fail.
Signed-off-by: Krzysztof Koch <krzysztof.koch at arm.com>
---
Changes can be seen at: https://github.com/KrzysztofKoch1/edk2/commit/ef11738efc94a9c3d7270d376a2cb273bbadbba2
Notes:
v1:
- improve the logic in the MADT parser [Krzysztof]
ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Madt/MadtParser.c | 187 ++++++++++----------
1 file changed, 94 insertions(+), 93 deletions(-)
diff --git a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Madt/MadtParser.c b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Madt/MadtParser.c
index 59c3df0cc8a080497b517baf36fc63f1e4ab866f..54f9fddc5426de5383b747ec7afd21396bcccfc9 100644
--- a/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Madt/MadtParser.c
+++ b/ShellPkg/Library/UefiShellAcpiViewCommandLib/Parsers/Madt/MadtParser.c
@@ -15,6 +15,7 @@
#include <Library/UefiLib.h>
#include "AcpiParser.h"
#include "AcpiTableParser.h"
+#include "AcpiView.h"
#include "MadtParser.h"
// Local Variables
@@ -35,7 +36,15 @@ EFIAPI
ValidateGICDSystemVectorBase (
IN UINT8* Ptr,
IN VOID* Context
- );
+)
+{
+ if (*(UINT32*)Ptr != 0) {
+ IncrementErrorCount ();
+ Print (
+ L"\nERROR: System Vector Base must be zero."
+ );
+ }
+}
/**
This function validates the SPE Overflow Interrupt in the GICC.
@@ -50,7 +59,41 @@ EFIAPI
ValidateSpeOverflowInterrupt (
IN UINT8* Ptr,
IN VOID* Context
- );
+ )
+{
+ UINT16 SpeOverflowInterrupt;
+
+ SpeOverflowInterrupt = *(UINT16*)Ptr;
+
+ // SPE not supported by this processor
+ if (SpeOverflowInterrupt == 0) {
+ return;
+ }
+
+ if ((SpeOverflowInterrupt < ARM_PPI_ID_MIN) ||
+ ((SpeOverflowInterrupt > ARM_PPI_ID_MAX) &&
+ (SpeOverflowInterrupt < ARM_PPI_ID_EXTENDED_MIN)) ||
+ (SpeOverflowInterrupt > ARM_PPI_ID_EXTENDED_MAX)) {
+ IncrementErrorCount ();
+ Print (
+ L"\nERROR: SPE Overflow Interrupt ID of %d is not in the allowed PPI ID "
+ L"ranges of %d-%d or %d-%d (for GICv3.1 or later).",
+ SpeOverflowInterrupt,
+ ARM_PPI_ID_MIN,
+ ARM_PPI_ID_MAX,
+ ARM_PPI_ID_EXTENDED_MIN,
+ ARM_PPI_ID_EXTENDED_MAX
+ );
+ } else if (SpeOverflowInterrupt != ARM_PPI_ID_PMBIRQ) {
+ IncrementWarningCount();
+ Print (
+ L"\nWARNING: SPE Overflow Interrupt ID of %d is not compliant with SBSA "
+ L"Level 3 PPI ID assignment: %d.",
+ SpeOverflowInterrupt,
+ ARM_PPI_ID_PMBIRQ
+ );
+ }
+}
/**
An ACPI_PARSER array describing the GICC Interrupt Controller Structure.
@@ -158,78 +201,6 @@ STATIC CONST ACPI_PARSER MadtInterruptControllerHeaderParser[] = {
{L"Reserved", 2, 2, NULL, NULL, NULL, NULL, NULL}
};
-/**
- This function validates the System Vector Base in the GICD.
-
- @param [in] Ptr Pointer to the start of the field data.
- @param [in] Context Pointer to context specific information e.g. this
- could be a pointer to the ACPI table header.
-**/
-STATIC
-VOID
-EFIAPI
-ValidateGICDSystemVectorBase (
- IN UINT8* Ptr,
- IN VOID* Context
-)
-{
- if (*(UINT32*)Ptr != 0) {
- IncrementErrorCount ();
- Print (
- L"\nERROR: System Vector Base must be zero."
- );
- }
-}
-
-/**
- This function validates the SPE Overflow Interrupt in the GICC.
-
- @param [in] Ptr Pointer to the start of the field data.
- @param [in] Context Pointer to context specific information e.g. this
- could be a pointer to the ACPI table header.
-**/
-STATIC
-VOID
-EFIAPI
-ValidateSpeOverflowInterrupt (
- IN UINT8* Ptr,
- IN VOID* Context
- )
-{
- UINT16 SpeOverflowInterrupt;
-
- SpeOverflowInterrupt = *(UINT16*)Ptr;
-
- // SPE not supported by this processor
- if (SpeOverflowInterrupt == 0) {
- return;
- }
-
- if ((SpeOverflowInterrupt < ARM_PPI_ID_MIN) ||
- ((SpeOverflowInterrupt > ARM_PPI_ID_MAX) &&
- (SpeOverflowInterrupt < ARM_PPI_ID_EXTENDED_MIN)) ||
- (SpeOverflowInterrupt > ARM_PPI_ID_EXTENDED_MAX)) {
- IncrementErrorCount ();
- Print (
- L"\nERROR: SPE Overflow Interrupt ID of %d is not in the allowed PPI ID "
- L"ranges of %d-%d or %d-%d (for GICv3.1 or later).",
- SpeOverflowInterrupt,
- ARM_PPI_ID_MIN,
- ARM_PPI_ID_MAX,
- ARM_PPI_ID_EXTENDED_MIN,
- ARM_PPI_ID_EXTENDED_MAX
- );
- } else if (SpeOverflowInterrupt != ARM_PPI_ID_PMBIRQ) {
- IncrementWarningCount();
- Print (
- L"\nWARNING: SPE Overflow Interrupt ID of %d is not compliant with SBSA "
- L"Level 3 PPI ID assignment: %d.",
- SpeOverflowInterrupt,
- ARM_PPI_ID_PMBIRQ
- );
- }
-}
-
/**
This function parses the ACPI MADT table.
When trace is enabled this function parses the MADT table and
@@ -286,20 +257,47 @@ ParseAcpiMadt (
0,
NULL,
InterruptContollerPtr,
- 2, // Length is 1 byte at offset 1
+ AcpiTableLength - Offset,
PARSER_PARAMS (MadtInterruptControllerHeaderParser)
);
- if (((Offset + (*MadtInterruptControllerLength)) > AcpiTableLength) ||
- (*MadtInterruptControllerLength < 4)) {
+ // Check if the values used to control the parsing logic have been
+ // successfully read.
+ if ((MadtInterruptControllerType == NULL) ||
+ (MadtInterruptControllerLength == NULL)) {
IncrementErrorCount ();
Print (
- L"ERROR: Invalid Interrupt Controller Length,"
- L" Type = %d, Length = %d\n",
- *MadtInterruptControllerType,
- *MadtInterruptControllerLength
- );
- break;
+ L"ERROR: Insufficient remaining table buffer length to read the " \
+ L"Interrupt Controller Structure header. Length = %d.\n",
+ AcpiTableLength - Offset
+ );
+ return;
+ }
+
+ // Make sure forward progress is made.
+ if (*MadtInterruptControllerLength < 2) {
+ IncrementErrorCount ();
+ Print (
+ L"ERROR: Structure length is too small: " \
+ L"MadtInterruptControllerLength = %d. " \
+ L"MadtInterruptControllerType = %d. MADT parsing aborted.\n",
+ *MadtInterruptControllerLength,
+ *MadtInterruptControllerType
+ );
+ return;
+ }
+
+ // Make sure the MADT structure lies inside the table
+ if ((Offset + *MadtInterruptControllerLength) > AcpiTableLength) {
+ IncrementErrorCount ();
+ Print (
+ L"ERROR: Invalid MADT structure length. " \
+ L"MadtInterruptControllerLength = %d. " \
+ L"RemainingTableBufferLength = %d. MADT parsing aborted.\n",
+ *MadtInterruptControllerLength,
+ AcpiTableLength - Offset
+ );
+ return;
}
switch (*MadtInterruptControllerType) {
@@ -316,11 +314,11 @@ ParseAcpiMadt (
}
case EFI_ACPI_6_3_GICD: {
- if (++GICDCount > 1) {
+ if (GetConsistencyChecking() &&
+ (++GICDCount > 1)) {
IncrementErrorCount ();
Print (
- L"ERROR: Only one GICD must be present,"
- L" GICDCount = %d\n",
+ L"ERROR: Only one GICD must be present. GICDCount = %d\n",
GICDCount
);
}
@@ -372,13 +370,16 @@ ParseAcpiMadt (
}
default: {
- IncrementErrorCount ();
- Print (
- L"ERROR: Unknown Interrupt Controller Structure,"
- L" Type = %d, Length = %d\n",
- *MadtInterruptControllerType,
- *MadtInterruptControllerLength
- );
+ if (GetConsistencyChecking ()) {
+ IncrementErrorCount ();
+ Print (
+ L"ERROR: Unknown Interrupt Controller Structure,"
+ L" Type = %d, Length = %d\n",
+ *MadtInterruptControllerType,
+ *MadtInterruptControllerLength
+ );
+ }
+ break;
}
} // switch
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#43647): https://edk2.groups.io/g/devel/message/43647
Mute This Topic: https://groups.io/mt/32439510/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list