[edk2-devel] [edk2-platforms PATCH v1 3/3] NetsecDxe: SnpInitialize() waits for media linking up

Leif Lindholm leif.lindholm at linaro.org
Tue Jul 23 16:14:05 UTC 2019


On Mon, Jul 22, 2019 at 08:56:36PM +0900, Masahisa Kojima wrote:
> The latest NetsecDxe requires issueing phy reset at the
> last stage of initialization to safely exit loopback mode.
> However, as a result, it takes a couple of seconds for link state
> to get stable, which could cause auto-chosen pxeboot to fail
> due to MediaPresent check error.
> 
> This patch adds link state check with 5s timeout in NetsecDxe
> initialization. The timeout value can be adjustable via
> configuration file.
> 
> Signed-off-by: Masahisa Kojima <masahisa.kojima at linaro.org>
> Signed-off-by: Satoru Okamoto <okamoto.satoru at socionext.com>
> ---
>  .../Socionext/DeveloperBox/DeveloperBox.dsc   |   1 +
>  .../Drivers/Net/NetsecDxe/NetsecDxe.c         | 232 ++++++++----------
>  .../Drivers/Net/NetsecDxe/NetsecDxe.dec       |   1 +
>  .../Drivers/Net/NetsecDxe/NetsecDxe.inf       |   1 +
>  4 files changed, 110 insertions(+), 125 deletions(-)

Please run edk2/BaseTools/Scripts/SetupGit.py from within this
repository. It sets up some common options that help with reviewing
patches.

(--stat=1000 is one option that can unfortunately not be overridden in
this way)

> 
> diff --git a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc b/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> index 97fb8c410c60..af149607f3ce 100644
> --- a/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> +++ b/Platform/Socionext/DeveloperBox/DeveloperBox.dsc
> @@ -138,6 +138,7 @@
>    gNetsecDxeTokenSpaceGuid.PcdFlowCtrlStartThreshold|36
>    gNetsecDxeTokenSpaceGuid.PcdFlowCtrlStopThreshold|48
>    gNetsecDxeTokenSpaceGuid.PcdPauseTime|256
> +  gNetsecDxeTokenSpaceGuid.PcdMediaDetectTimeoutOnBoot|5

Please insert alphabetically sorted.

>  
>    gSynQuacerTokenSpaceGuid.PcdNetsecEepromBase|0x08080000
>    gSynQuacerTokenSpaceGuid.PcdNetsecPhyAddress|7
> diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.c b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.c
> index 0b91d4af44a3..a304e02208fa 100644
> --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.c
> +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.c
> @@ -169,6 +169,98 @@ ExitUnlock:
>    return Status;
>  }
>  
> +EFI_STATUS
> +EFIAPI
> +NetsecUpdateLink (
> +  IN  EFI_SIMPLE_NETWORK_PROTOCOL    *Snp
> +  )
> +{
> +  NETSEC_DRIVER                 *LanDriver;
> +  ogma_phy_link_status_t        phy_link_status;
> +  ogma_gmac_mode_t              ogma_gmac_mode;
> +  ogma_err_t                    ogma_err;
> +  BOOLEAN                       ValidFlag;
> +  ogma_gmac_mode_t              GmacMode;
> +  BOOLEAN                       RxRunningFlag;
> +  BOOLEAN                       TxRunningFlag;
> +  EFI_STATUS                    ErrorStatus;
> +
> +  LanDriver = INSTANCE_FROM_SNP_THIS (Snp);
> +
> +  // Update the media status
> +  ogma_err = ogma_get_phy_link_status (LanDriver->Handle,
> +               &phy_link_status);
> +  if (ogma_err != OGMA_ERR_OK) {
> +    DEBUG ((DEBUG_ERROR,
> +      "NETSEC: ogma_get_phy_link_status failed with error code: %d\n",
> +      (INT32)ogma_err));
> +    ErrorStatus = EFI_DEVICE_ERROR;
> +    goto Fail;
> +  }
> +
> +  // Update the GMAC status
> +  ogma_err = ogma_get_gmac_status (LanDriver->Handle, &ValidFlag, &GmacMode,
> +               &RxRunningFlag, &TxRunningFlag);
> +  if (ogma_err != OGMA_ERR_OK) {
> +    DEBUG ((DEBUG_ERROR,
> +      "NETSEC: ogma_get_gmac_status failed with error code: %d\n",
> +      (INT32)ogma_err));
> +    ErrorStatus = EFI_DEVICE_ERROR;
> +    goto Fail;
> +  }
> +
> +  // Stop GMAC when GMAC is running and physical link is down
> +  if (RxRunningFlag && TxRunningFlag && !phy_link_status.up_flag) {
> +    ogma_err = ogma_stop_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> +    if (ogma_err != OGMA_ERR_OK) {
> +      DEBUG ((DEBUG_ERROR,
> +        "NETSEC: ogma_stop_gmac() failed with error status %d\n",
> +        ogma_err));
> +      ErrorStatus = EFI_DEVICE_ERROR;
> +      goto Fail;
> +    }
> +  }
> +
> +  // Start GMAC when GMAC is stopped and physical link is up
> +  if (!RxRunningFlag && !TxRunningFlag && phy_link_status.up_flag) {
> +    ZeroMem (&ogma_gmac_mode, sizeof (ogma_gmac_mode_t));
> +    ogma_gmac_mode.link_speed = phy_link_status.link_speed;
> +    ogma_gmac_mode.half_duplex_flag = (ogma_bool)phy_link_status.half_duplex_flag;
> +    if (!phy_link_status.half_duplex_flag && FixedPcdGet8 (PcdFlowCtrl)) {
> +      ogma_gmac_mode.flow_ctrl_enable_flag     = FixedPcdGet8 (PcdFlowCtrl);
> +      ogma_gmac_mode.flow_ctrl_start_threshold = FixedPcdGet16 (PcdFlowCtrlStartThreshold);
> +      ogma_gmac_mode.flow_ctrl_stop_threshold  = FixedPcdGet16 (PcdFlowCtrlStopThreshold);
> +      ogma_gmac_mode.pause_time                = FixedPcdGet16 (PcdPauseTime);
> +    }
> +
> +    ogma_err = ogma_set_gmac_mode (LanDriver->Handle, &ogma_gmac_mode);
> +    if (ogma_err != OGMA_ERR_OK) {
> +      DEBUG ((DEBUG_ERROR,
> +        "NETSEC: ogma_set_gmac() failed with error status %d\n",
> +        (INT32)ogma_err));
> +      ErrorStatus = EFI_DEVICE_ERROR;
> +      goto Fail;
> +    }
> +
> +    ogma_err = ogma_start_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> +    if (ogma_err != OGMA_ERR_OK) {
> +      DEBUG ((DEBUG_ERROR,
> +        "NETSEC: ogma_start_gmac() failed with error status %d\n",
> +        (INT32)ogma_err));
> +      ErrorStatus = EFI_DEVICE_ERROR;
> +      goto Fail;
> +    }
> +  }
> +
> +  /* Updating link status for external guery */
> +  Snp->Mode->MediaPresent = phy_link_status.up_flag;
> +  return EFI_SUCCESS;
> +
> +Fail:
> +  Snp->Mode->MediaPresent = FALSE;
> +  return ErrorStatus;
> +}
> +
>  /*
>   *  UEFI Initialize() function
>   */
> @@ -185,9 +277,9 @@ SnpInitialize (
>    EFI_TPL                 SavedTpl;
>    EFI_STATUS              Status;
>  
> -  ogma_phy_link_status_t  phy_link_status;
>    ogma_err_t              ogma_err;
> -  ogma_gmac_mode_t        ogma_gmac_mode;
> +
> +  UINT32                  Index;
>  
>    // Check Snp Instance
>    if (Snp == NULL) {
> @@ -271,48 +363,18 @@ SnpInitialize (
>    ogma_disable_desc_ring_irq (LanDriver->Handle, OGMA_DESC_RING_ID_NRM_TX,
>                                OGMA_CH_IRQ_REG_EMPTY);
>  
> -  // Stop and restart the physical link
> -  ogma_err = ogma_stop_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_stop_gmac() failed with error status %d\n",
> -      ogma_err));
> -    ReturnUnlock (EFI_DEVICE_ERROR);
> -  }
> -
> -  ogma_err = ogma_get_phy_link_status (LanDriver->Handle,
> -               &phy_link_status);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_get_phy_link_status() failed error code %d\n",
> -      (INT32)ogma_err));
> -    ReturnUnlock (EFI_DEVICE_ERROR);
> -  }
> -
> -  SetMem (&ogma_gmac_mode, sizeof (ogma_gmac_mode_t), 0);
> -  ogma_gmac_mode.link_speed = phy_link_status.link_speed;
> -  ogma_gmac_mode.half_duplex_flag = (ogma_bool)phy_link_status.half_duplex_flag;
> -  if ((!phy_link_status.half_duplex_flag) && FixedPcdGet8 (PcdFlowCtrl)) {
> -    ogma_gmac_mode.flow_ctrl_enable_flag     = FixedPcdGet8 (PcdFlowCtrl);
> -    ogma_gmac_mode.flow_ctrl_start_threshold = FixedPcdGet16 (PcdFlowCtrlStartThreshold);
> -    ogma_gmac_mode.flow_ctrl_stop_threshold  = FixedPcdGet16 (PcdFlowCtrlStopThreshold);
> -    ogma_gmac_mode.pause_time                = FixedPcdGet16 (PcdPauseTime);
> -  }
> -
> -  ogma_err = ogma_set_gmac_mode (LanDriver->Handle, &ogma_gmac_mode);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_set_gmac() failed with error status %d\n",
> -      (INT32)ogma_err));
> -    ReturnUnlock (EFI_DEVICE_ERROR);
> -  }
> -
> -  ogma_err = ogma_start_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_start_gmac() failed with error status %d\n",
> -      (INT32)ogma_err));
> -    ReturnUnlock (EFI_DEVICE_ERROR);
> +  // Wait for media linking up
> +  for (Index = 0; Index < (UINT32)FixedPcdGet8 (PcdMediaDetectTimeoutOnBoot) * 10; Index++) {
> +    Status = NetsecUpdateLink (Snp);
> +    if (Status != EFI_SUCCESS) {
> +      ReturnUnlock (EFI_DEVICE_ERROR);
> +    }
> +
> +    if (Snp->Mode->MediaPresent) {
> +      break;
> +    }
> +
> +    MicroSecondDelay(100000);
>    }
>  
>    // Declare the driver as initialized
> @@ -420,14 +482,6 @@ NetsecPollPhyStatus (
>    )
>  {
>    EFI_SIMPLE_NETWORK_PROTOCOL   *Snp;
> -  NETSEC_DRIVER                 *LanDriver;
> -  ogma_phy_link_status_t        phy_link_status;
> -  ogma_gmac_mode_t              ogma_gmac_mode;
> -  ogma_err_t                    ogma_err;
> -  BOOLEAN                       ValidFlag;
> -  ogma_gmac_mode_t              GmacMode;
> -  BOOLEAN                       RxRunningFlag;
> -  BOOLEAN                       TxRunningFlag;
>  
>    Snp = (EFI_SIMPLE_NETWORK_PROTOCOL *)Context;
>    if (Snp == NULL) {
> @@ -435,66 +489,7 @@ NetsecPollPhyStatus (
>      return;
>    }
>  
> -  LanDriver = INSTANCE_FROM_SNP_THIS (Snp);
> -
> -  // Update the media status
> -  ogma_err = ogma_get_phy_link_status (LanDriver->Handle,
> -               &phy_link_status);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_get_phy_link_status failed with error code: %d\n",
> -      (INT32)ogma_err));
> -    return;
> -  }
> -
> -  // Update the GMAC status
> -  ogma_err = ogma_get_gmac_status (LanDriver->Handle, &ValidFlag, &GmacMode,
> -               &RxRunningFlag, &TxRunningFlag);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_get_gmac_status failed with error code: %d\n",
> -      (INT32)ogma_err));
> -    return;
> -  }
> -
> -  // Stop GMAC when GMAC is running and physical link is down
> -  if (RxRunningFlag && TxRunningFlag && !phy_link_status.up_flag) {
> -    ogma_err = ogma_stop_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> -    if (ogma_err != OGMA_ERR_OK) {
> -      DEBUG ((DEBUG_ERROR,
> -        "NETSEC: ogma_stop_gmac() failed with error status %d\n",
> -        ogma_err));
> -      return;
> -    }
> -  }
> -
> -  // Start GMAC when GMAC is stopped and physical link is up
> -  if (!RxRunningFlag && !TxRunningFlag && phy_link_status.up_flag) {
> -    ZeroMem (&ogma_gmac_mode, sizeof (ogma_gmac_mode_t));
> -    ogma_gmac_mode.link_speed = phy_link_status.link_speed;
> -    ogma_gmac_mode.half_duplex_flag = (ogma_bool)phy_link_status.half_duplex_flag;
> -    if (!phy_link_status.half_duplex_flag && FixedPcdGet8 (PcdFlowCtrl)) {
> -      ogma_gmac_mode.flow_ctrl_enable_flag     = FixedPcdGet8 (PcdFlowCtrl);
> -      ogma_gmac_mode.flow_ctrl_start_threshold = FixedPcdGet16 (PcdFlowCtrlStartThreshold);
> -      ogma_gmac_mode.flow_ctrl_stop_threshold  = FixedPcdGet16 (PcdFlowCtrlStopThreshold);
> -      ogma_gmac_mode.pause_time                = FixedPcdGet16 (PcdPauseTime);
> -    }
> -
> -    ogma_err = ogma_set_gmac_mode (LanDriver->Handle, &ogma_gmac_mode);
> -    if (ogma_err != OGMA_ERR_OK) {
> -      DEBUG ((DEBUG_ERROR,
> -        "NETSEC: ogma_set_gmac() failed with error status %d\n",
> -        (INT32)ogma_err));
> -      return;
> -    }
> -
> -    ogma_err = ogma_start_gmac (LanDriver->Handle, OGMA_TRUE, OGMA_TRUE);
> -    if (ogma_err != OGMA_ERR_OK) {
> -      DEBUG ((DEBUG_ERROR,
> -        "NETSEC: ogma_start_gmac() failed with error status %d\n",
> -        (INT32)ogma_err));
> -    }
> -  }
> +  NetsecUpdateLink (Snp);
>  }
>  
>  /*
> @@ -631,7 +626,6 @@ SnpGetStatus (
>    pfdep_pkt_handle_t        pkt_handle;
>    LIST_ENTRY                *Link;
>  
> -  ogma_phy_link_status_t  phy_link_status;
>    ogma_err_t              ogma_err;
>  
>    // Check preliminaries
> @@ -661,18 +655,6 @@ SnpGetStatus (
>    // Find the LanDriver structure
>    LanDriver = INSTANCE_FROM_SNP_THIS (Snp);
>  
> -  // Update the media status
> -  ogma_err = ogma_get_phy_link_status (LanDriver->Handle,
> -               &phy_link_status);
> -  if (ogma_err != OGMA_ERR_OK) {
> -    DEBUG ((DEBUG_ERROR,
> -      "NETSEC: ogma_get_phy_link_status failed with error code: %d\n",
> -      (INT32)ogma_err));
> -    ReturnUnlock (EFI_DEVICE_ERROR);
> -  }
> -
> -  Snp->Mode->MediaPresent = phy_link_status.up_flag;
> -
>    ogma_err = ogma_clean_tx_desc_ring (LanDriver->Handle,
>                                        OGMA_DESC_RING_ID_NRM_TX);
>  
> diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec
> index 6b9f60293879..016eba5ef695 100644
> --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec
> +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.dec
> @@ -38,3 +38,4 @@
>    gNetsecDxeTokenSpaceGuid.PcdFlowCtrlStartThreshold|0x0|UINT16|0x00000006
>    gNetsecDxeTokenSpaceGuid.PcdFlowCtrlStopThreshold|0x0|UINT16|0x00000007
>    gNetsecDxeTokenSpaceGuid.PcdPauseTime|0x0|UINT16|0x00000008
> +  gNetsecDxeTokenSpaceGuid.PcdMediaDetectTimeoutOnBoot|0x0|UINT8|0x00000009

Please insert alphabetically sorted.

> diff --git a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.inf b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.inf
> index 49dd28efc65b..818014e6d257 100644
> --- a/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.inf
> +++ b/Silicon/Socionext/SynQuacer/Drivers/Net/NetsecDxe/NetsecDxe.inf
> @@ -62,3 +62,4 @@
>    gNetsecDxeTokenSpaceGuid.PcdFlowCtrlStopThreshold
>    gNetsecDxeTokenSpaceGuid.PcdJumboPacket
>    gNetsecDxeTokenSpaceGuid.PcdPauseTime
> +  gNetsecDxeTokenSpaceGuid.PcdMediaDetectTimeoutOnBoot

Please insert slphabetcally sorted.

/
    Leif

> -- 
> 2.17.1
> 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#44264): https://edk2.groups.io/g/devel/message/44264
Mute This Topic: https://groups.io/mt/32557833/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-




More information about the edk2-devel-archive mailing list