[edk2-devel] [Patch v3 4/6] UefiCpuPkg: Add new EDKII_PEI_MP_SERVICES2_PPI
Dong, Eric
eric.dong at intel.com
Wed Jul 24 07:07:25 UTC 2019
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1973
Add definition for new EDKII_PEI_MP_SERVICES2_PPI.
It includes all APIs existed in EFI_PEI_MP_SERVICES_PPI
and add new API EDKII_PEI_MP_SERVICES_STARTUP_ALL_CPUS.
Cc: Ray Ni <ray.ni at intel.com>
Cc: Laszlo Ersek <lersek at redhat.com>
Cc: Chandana Kumar <chandana.c.kumar at intel.com>
Cc: Star Zeng <star.zeng at intel.com>
Signed-off-by: Eric Dong <eric.dong at intel.com>
---
UefiCpuPkg/Include/Ppi/MpServices2.h | 279 +++++++++++++++++++++++++++
UefiCpuPkg/UefiCpuPkg.dec | 3 +
2 files changed, 282 insertions(+)
create mode 100644 UefiCpuPkg/Include/Ppi/MpServices2.h
diff --git a/UefiCpuPkg/Include/Ppi/MpServices2.h b/UefiCpuPkg/Include/Ppi/MpServices2.h
new file mode 100644
index 0000000000..83a56588a5
--- /dev/null
+++ b/UefiCpuPkg/Include/Ppi/MpServices2.h
@@ -0,0 +1,279 @@
+/** @file
+ This file declares edkii Multi-processor service PPI.
+
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __EDKII_PEI_MP_SERVICES2_PPI_H__
+#define __EDKII_PEI_MP_SERVICES2_PPI_H__
+
+#include <Ppi/MpServices.h>
+
+#define EDKII_PEI_MP_SERVICES2_PPI_GUID \
+ { \
+ 0x5cb9cb3d, 0x31a4, 0x480c, { 0x94, 0x98, 0x29, 0xd2, 0x69, 0xba, 0xcf, 0xba} \
+ }
+
+typedef struct _EDKII_PEI_MP_SERVICES2_PPI EDKII_PEI_MP_SERVICES2_PPI;
+
+/**
+ Get the number of CPU's.
+
+ @param[in] This Pointer to this instance of the PPI.
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in
+ the system, including the BSP and disabled APs.
+ @param[out] NumberOfEnabledProcessors
+ Number of processors in the system that are enabled.
+
+ @retval EFI_SUCCESS The number of logical processors and enabled
+ logical processors was retrieved.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.
+ NumberOfEnabledProcessors is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ OUT UINTN *NumberOfProcessors,
+ OUT UINTN *NumberOfEnabledProcessors
+ );
+
+/**
+ Get information on a specific CPU.
+
+ @param[in] This Pointer to this instance of the PPI.
+ @param[in] ProcessorNumber Pointer to the total number of logical processors in
+ the system, including the BSP and disabled APs.
+ @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled.
+
+ @retval EFI_SUCCESS Processor information was returned.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist in the platform.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_GET_PROCESSOR_INFO) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN UINTN ProcessorNumber,
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer
+ );
+
+/**
+ Activate all of the application proessors.
+
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] Procedure A pointer to the function to be run on enabled APs of
+ the system.
+ @param[in] SingleThread If TRUE, then all the enabled APs execute the function
+ specified by Procedure one by one, in ascending order
+ of processor handle number. If FALSE, then all the
+ enabled APs execute the function specified by Procedure
+ simultaneously.
+ @param[in] TimeoutInMicroSeconds
+ Indicates the time limit in microseconds for APs to
+ return from Procedure, for blocking mode only. Zero
+ means infinity. If the timeout expires before all APs
+ return from Procedure, then Procedure on the failed APs
+ is terminated. All enabled APs are available for next
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the
+ timeout expires in blocking mode, BSP returns
+ EFI_TIMEOUT.
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the
+ timeout expired.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all
+ enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_STARTUP_ALL_APS) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN BOOLEAN SingleThread,
+ IN UINTN TimeoutInMicroSeconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ );
+
+/**
+ Activate a specific application processor.
+
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] Procedure A pointer to the function to be run on enabled APs of
+ the system.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] TimeoutInMicroSeconds
+ Indicates the time limit in microseconds for APs to
+ return from Procedure, for blocking mode only. Zero
+ means infinity. If the timeout expires before all APs
+ return from Procedure, then Procedure on the failed APs
+ is terminated. All enabled APs are available for next
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the
+ timeout expires in blocking mode, BSP returns
+ EFI_TIMEOUT.
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.
+
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before the
+ timeout expires.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the
+ specified AP has finished.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_STARTUP_THIS_AP) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN ProcessorNumber,
+ IN UINTN TimeoutInMicroseconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ );
+
+/**
+ Switch the boot strap processor.
+
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled
+ AP. Otherwise, it will be disabled.
+
+ @retval EFI_SUCCESS BSP successfully switched.
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this
+ service returning.
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND The processor with the handle specified by
+ ProcessorNumber does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled
+ AP.
+ @retval EFI_NOT_READY The specified AP is busy.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_SWITCH_BSP) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableOldBSP
+ );
+
+/**
+ Enable or disable an application processor.
+
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+ @param[in] EnableAP Specifies the new state for the processor for enabled,
+ FALSE for disabled.
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies the
+ new health status of the AP. This flag corresponds to
+ StatusFlag defined in EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo().
+ Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other
+ bits are ignored. If it is NULL, this parameter is
+ ignored.
+
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior
+ to this service returning.
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber
+ does not exist.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_ENABLEDISABLEAP) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN UINTN ProcessorNumber,
+ IN BOOLEAN EnableAP,
+ IN UINT32 *HealthFlag OPTIONAL
+ );
+
+/**
+ Identify the currently executing processor.
+
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.
+ @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the
+ total number of logical processors minus 1. The total
+ number of logical processors can be retrieved by
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().
+
+ @retval EFI_SUCCESS The current processor handle number was returned in
+ ProcessorNumber.
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_WHOAMI) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ OUT UINTN *ProcessorNumber
+ );
+
+
+/**
+ Activate all of the application proessors.
+
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.
+ @param[in] Procedure A pointer to the function to be run on enabled APs of
+ the system.
+ @param[in] TimeoutInMicroSeconds
+ Indicates the time limit in microseconds for APs to
+ return from Procedure, for blocking mode only. Zero
+ means infinity. If the timeout expires in blocking
+ mode, BSP returns EFI_TIMEOUT.
+ @param[in] ProcedureArgument The parameter passed into Procedure for all CPUs.
+
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the
+ timeout expired.
+ @retval EFI_DEVICE_ERROR Caller processor is AP.
+ @retval EFI_NOT_READY Any enabled APs are busy.
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all
+ enabled APs have finished.
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EDKII_PEI_MP_SERVICES_STARTUP_ALL_CPUS) (
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,
+ IN EFI_AP_PROCEDURE Procedure,
+ IN UINTN TimeoutInMicroSeconds,
+ IN VOID *ProcedureArgument OPTIONAL
+ );
+
+struct _EDKII_PEI_MP_SERVICES2_PPI {
+ EDKII_PEI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors;
+ EDKII_PEI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo;
+ EDKII_PEI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs;
+ EDKII_PEI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP;
+ EDKII_PEI_MP_SERVICES_SWITCH_BSP SwitchBSP;
+ EDKII_PEI_MP_SERVICES_ENABLEDISABLEAP EnableDisableAP;
+ EDKII_PEI_MP_SERVICES_WHOAMI WhoAmI;
+ EDKII_PEI_MP_SERVICES_STARTUP_ALL_CPUS StartupAllCPUs;
+};
+
+extern EFI_GUID gEdkiiPeiMpServices2PpiGuid;
+
+#endif
diff --git a/UefiCpuPkg/UefiCpuPkg.dec b/UefiCpuPkg/UefiCpuPkg.dec
index 6ddf0cd224..14ddaa8633 100644
--- a/UefiCpuPkg/UefiCpuPkg.dec
+++ b/UefiCpuPkg/UefiCpuPkg.dec
@@ -75,6 +75,9 @@
# 0x80000001 | Invalid value provided.
#
+[Ppis]
+ gEdkiiPeiMpServices2PpiGuid = { 0x5cb9cb3d, 0x31a4, 0x480c, { 0x94, 0x98, 0x29, 0xd2, 0x69, 0xba, 0xcf, 0xba}}
+
[PcdsFeatureFlag]
## Indicates if SMM Profile will be enabled.
# If enabled, instruction executions in and data accesses to memory outside of SMRAM will be logged.
--
2.21.0.windows.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#44293): https://edk2.groups.io/g/devel/message/44293
Mute This Topic: https://groups.io/mt/32581677/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list