[edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V2] MdePkg/Protocols: New interface, EFI encodings to PCI Plat protocol
Javeed, Ashraf
ashraf.javeed at intel.com
Mon Jul 29 14:27:08 UTC 2019
Hello Yao Jeiwen,
Thanks for reviewing in detail!
I used the PCIe attribute in the context of my ECR; say MPS is a PCI standard feature which has to be set to defined set of values only, thus I called it as its attributes.
I had updated about this latest additional PCI feature (CTO) inclusion in this Bugzilla feature request itself (Reference: https://bugzilla.tianocore.org/show_bug.cgi?id=1954#c2)
Regards
Ashraf
> -----Original Message-----
> From: Yao, Jiewen
> Sent: Monday, July 29, 2019 5:49 PM
> To: Javeed, Ashraf <ashraf.javeed at intel.com>; devel at edk2.groups.io; Gao,
> Liming <liming.gao at intel.com>
> Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> <ray.ni at intel.com>
> Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V2]
> MdePkg/Protocols: New interface, EFI encodings to PCI Plat protocol
>
> I think the request makes sense.
>
> I am not sure if I understand your question on PCI attributes. It is generic
> concept and defined in UEFI spec. Here we are discussing device policy in PCIE
> spec.
>
> I checked ECR in https://bugzilla.tianocore.org/show_bug.cgi?id=1954, it
> defines
> typedef struct {
> EFI_PCI_CONF_MAX_PAYLOAD_SIZE DeviceCtlMPS;
> EFI_PCI_CONF_MAX_READ_REQ_SIZE DeviceCtlMRRS;
> EFI_PCI_CONF_EXTENDED_TAG DeviceCtlExtTag;
> EFI_PCI_CONF_RELAX_ORDER DeviceCtlRelaxOrder;
> EFI_PCI_CONF_NO_SNOOP DeviceCtlNoSnoop;
> EFI_PCI_CONF_ASPM_SUPPORT LinkCtlASPMState;
> EFI_PCI_CONF_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
> EFI_PCI_CONF_EXTENDED_SYNCH LinkCtlExtSynch;
> EFI_PCI_CONF_ATOMIC_OP DeviceCtl2AtomicOp;
> EFI_PCI_CONF_LTR DeviceCtl2LTR;
> EFI_PCI_CONF_PTM PTMControl;
> EFI_PCI_CONF_RESERVES Reserves[117];
> } EFI_PCI_PLATFORM_EXTENDED_POLICY;
>
> But in below patch, it is already changed to:
>
> typedef struct {
> EFI_PCI_CONF_MAX_PAYLOAD_SIZE DeviceCtlMPS;
> EFI_PCI_CONF_MAX_READ_REQ_SIZE DeviceCtlMRRS;
> EFI_PCI_CONF_EXTENDED_TAG DeviceCtlExtTag;
> EFI_PCI_CONF_RELAX_ORDER DeviceCtlRelaxOrder;
> EFI_PCI_CONF_NO_SNOOP DeviceCtlNoSnoop;
> EFI_PCI_CONF_ASPM_SUPPORT LinkCtlASPMState;
> EFI_PCI_CONF_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
> EFI_PCI_CONF_EXTENDED_SYNCH LinkCtlExtSynch;
> EFI_PCI_CONF_ATOMIC_OP DeviceCtl2AtomicOp;
> EFI_PCI_CONF_LTR DeviceCtl2LTR;
> EFI_PCI_CONF_PTM PTMControl;
> EFI_PCI_CONF_CTO_SUPPORT CTOsupport;
> EFI_PCI_CONF_RESERVES Reserves[116];
> } EFI_PCI_PLATFORM_EXTENDED_POLICY;
>
> That means, *the policy structure is changed within 1 month.*
>
> I am not sure how stable the current version is. But changing spec is time
> consuming.
>
> Maybe we can start with EDKII interface only.
> Wait for a while, to see if we need add something, then decide if there is need
> to add to PI spec.
>
> Thank you
> Yao Jiewen
>
>
>
> > -----Original Message-----
> > From: Javeed, Ashraf
> > Sent: Monday, July 29, 2019 7:18 PM
> > To: Yao, Jiewen <jiewen.yao at intel.com>; devel at edk2.groups.io; Gao,
> > Liming <liming.gao at intel.com>
> > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> > <ray.ni at intel.com>
> > Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V2]
> > MdePkg/Protocols: New interface, EFI encodings to PCI Plat protocol
> >
> > My response inline below...
> >
> > Thanks
> > Ashraf
> >
> > > -----Original Message-----
> > > From: Yao, Jiewen
> > > Sent: Monday, July 29, 2019 2:26 PM
> > > To: Javeed, Ashraf <ashraf.javeed at intel.com>; devel at edk2.groups.io;
> > Gao,
> > > Liming <liming.gao at intel.com>
> > > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> > > <ray.ni at intel.com>
> > > Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V2]
> > > MdePkg/Protocols: New interface, EFI encodings to PCI Plat protocol
> > >
> > > Oh. This patch is for staging. Not for EDKII master, right?
> > > If so, I have no concern.
> > > For the master, I think MdePkg should only include what has been defined.
> > >
> > > For this patch, I am curious on how to maintain the compatibility?
> > [Ashraf] I had discussion with Ray related to compatibility; the new
> > GUID is defined to maintain both backward and forward compatibility,
> > hence the name PCI Platform Protocol 2.
> > >
> > > For example, what happen, if PCIE 5.0 or PCIE 6.0 add new device policy?
> > [Ashraf] There is major/minor version defined in the PCI Platform
> > Protocol 2, which can be used for extending it in future if required.
> > > It seems weird to bind a PI protocol to another industry standard.
> > > We had
> > better
> > > decouple them.
> > [Ashraf] The abstraction for the PCI attributes are done in similar
> > way as it is done in the existing PI spec for the
> > EFI_PCI_PLATFORM_POLICY. Please suggest how to represent the PCI
> > attributes defined in the EFI_PCI_PLATFORM_EXTENDED_POLICY of the
> > PciPlatform2.h?
> > >
> > > As such, we don't need update PI spec again and again just because
> > > PCIE
> > spec
> > > update.
> > > Thinking of SMBIOS, ACPI, ATA, SCSI, I don't believe we need update
> > protocol
> > > interface just because they are updated.
> > [Ashraf] As I have indicated in the feature request Id 1954; the
> > reason to enhance this protocol is because there is no interface to
> > obtain device specific platform policies from its platform firmware.
> > There is a demand from Intel Server products to extend PCI standard
> > feature set in the PCI Bus driver of the MdeModulePkg, and this
> > protocol needs to be enhanced to accommodate device-specific platform
> > policies which would be used directly by the PCI Bus driver.
> > I strongly believe enhancing this protocol will help the PCI Bus
> > driver to support many PCI features seamlessly in future, without
> > further changes to PI specification.
> > Otherwise, please provide an alternative to consider the
> > device-specific platform policies which the MdeModulePkg's PCI Bus
> > driver can adhere to support those PCI standard features in future?
> > >
> > > Thank you
> > > Yao Jiewen
> > >
> > > > -----Original Message-----
> > > > From: Javeed, Ashraf
> > > > Sent: Monday, July 29, 2019 4:12 PM
> > > > To: Yao, Jiewen <jiewen.yao at intel.com>; devel at edk2.groups.io; Gao,
> > > > Liming <liming.gao at intel.com>
> > > > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> > > > <ray.ni at intel.com>
> > > > Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH
> > V2]
> > > > MdePkg/Protocols: New interface, EFI encodings to PCI Plat
> > > > protocol
> > > >
> > > > Hi Yao Jiewen,
> > > > Can you please elaborate your concern?
> > > > The PCI Platform Protocol / PCI Override Protocol are defined in
> > > > PI Spec
> > 1.7.
> > > > These same protocols are enhanced here.
> > > > The producer would be the platform firmware, and consumer would be
> > the
> > > > MdeModulePkg's PCI Bus driver.
> > > > The detailed document is attached to Bugzilla feature request Id 1954.
> > > >
> > > > Thanks
> > > > Ashraf
> > > >
> > > > > -----Original Message-----
> > > > > From: Yao, Jiewen
> > > > > Sent: Monday, July 29, 2019 1:36 PM
> > > > > To: devel at edk2.groups.io; Gao, Liming <liming.gao at intel.com>;
> > > > > Javeed,
> > > > Ashraf
> > > > > <ashraf.javeed at intel.com>
> > > > > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> > > > > <ray.ni at intel.com>; Yao, Jiewen <jiewen.yao at intel.com>
> > > > > Subject: RE: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH
> > V2]
> > > > > MdePkg/Protocols: New interface, EFI encodings to PCI Plat
> > > > > protocol
> > > > >
> > > > > Hi
> > > > > I think this policy protocol should be EDKII specific. Currently
> > > > > it is no in PI
> > > > spec.
> > > > > Should it be in MdeModulePkg ?
> > > > >
> > > > > Thank you
> > > > > Yao Jiewen
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: devel at edk2.groups.io [mailto:devel at edk2.groups.io] On
> > Behalf
> > > > Of
> > > > > > Liming Gao
> > > > > > Sent: Monday, July 29, 2019 3:52 PM
> > > > > > To: Javeed, Ashraf <ashraf.javeed at intel.com>;
> > devel at edk2.groups.io
> > > > > > Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Ni, Ray
> > > > > > <ray.ni at intel.com>
> > > > > > Subject: Re: [edk2-devel] [edk2-staging/UEFI_PCI_ENHANCE-2
> > PATCH
> > > > V2]
> > > > > > MdePkg/Protocols: New interface, EFI encodings to PCI Plat
> > > > > > protocol
> > > > > >
> > > > > > Ashraf:
> > > > > > For new files, please use license: SPDX-License-Identifier:
> > > > > > BSD-2-Clause-Patent.
> > > > > >
> > > > > > Other change is good. Reviewed-by: Liming Gao
> > > > <liming.gao at intel.com>
> > > > > >
> > > > > > Thanks
> > > > > > Liming
> > > > > > >-----Original Message-----
> > > > > > >From: Javeed, Ashraf
> > > > > > >Sent: Monday, July 29, 2019 2:52 PM
> > > > > > >To: devel at edk2.groups.io
> > > > > > >Cc: Kinney, Michael D <michael.d.kinney at intel.com>; Gao,
> > > > > > >Liming <liming.gao at intel.com>; Ni, Ray <ray.ni at intel.com>
> > > > > > >Subject: [edk2-staging/UEFI_PCI_ENHANCE-2 PATCH V2]
> > > > > > MdePkg/Protocols:
> > > > > > >New interface, EFI encodings to PCI Plat protocol
> > > > > > >
> > > > > > >BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1954
> > > > > > >
> > > > > > >New interface added to PCI Platform Protocol / PCI Override
> > > > > > >Protocol to retrieve device-specific platform policy for the
> > > > > > >following PCI standard features, like Maximum Payload Size
> > > > > > >(MPS), Maximum Read Request Size (MRRS),Extended Tags, Relax
> > > > > > >Order, No-Snoop, Active State Power Management (ASPM),Latency
> > > > > > >Time Reporting (LTR),
> > > > AtomicOp,
> > > > > > >Reference Clock Configuration, Extended SYNCH, PTM support,
> > > > > > >and Completion Timeout
> > > > > > (CTO).
> > > > > > >New source files added with enhanced definitions are in:
> > > > > > >MdePkg/Include/Protocol/PciPlatform2.h,
> > > > > > >MdePkg/Include/Protocol/PciOverride2.h
> > > > > > >
> > > > > > >Signed-off-by: Ashraf Javeed <ashraf.javeed at intel.com>
> > > > > > >Cc: Michael D Kinney <michael.d.kinney at intel.com>
> > > > > > >Cc: Liming Gao <liming.gao at intel.com>
> > > > > > >Cc: Ray Ni <ray.ni at intel.com>
> > > > > > >---
> > > > > > >
> > > > > > >In V2: Correction made to header sections of source files
> > > > > > >---
> > > > > > > MdePkg/Include/Protocol/PciOverride2.h | 43
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++
> > > > > > > MdePkg/Include/Protocol/PciPlatform2.h | 393
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > +++
> > > > +
> > > > > > >+++++++++++++++++++++++++++++++++++++++
> > > > > > > MdePkg/MdePkg.dec | 6 ++++++
> > > > > > > 3 files changed, 442 insertions(+)
> > > > > > >
> > > > > > >diff --git a/MdePkg/Include/Protocol/PciOverride2.h
> > > > > > >b/MdePkg/Include/Protocol/PciOverride2.h
> > > > > > >new file mode 100644
> > > > > > >index 0000000000..a7f541b4c3
> > > > > > >--- /dev/null
> > > > > > >+++ b/MdePkg/Include/Protocol/PciOverride2.h
> > > > > > >@@ -0,0 +1,43 @@
> > > > > > >+/** @file
> > > > > > >+ This file declares EFI PCI Override protocol which
> > > > > > >+provides the interface
> > > > > > >between
> > > > > > >+ the PCI bus driver/PCI Host Bridge Resource Allocation
> > > > > > >+ driver and an
> > > > > > >implementation's
> > > > > > >+ driver to describe the unique features of a platform.
> > > > > > >+ This protocol is optional.
> > > > > > >+
> > > > > > >+ Copyright (c) 2019, Intel Corporation. All rights
> > > > > > >+ reserved.<BR> This program and the accompanying materials
> > are
> > > > > > >+ licensed and
> > > > made
> > > > > > >+ available under the terms and conditions of the
> > > > > > BSD
> > > > > > >License
> > > > > > >+ which accompanies this distribution. The full text of the
> > > > > > >+ license may
> > > > > > be
> > > > > > >found at
> > > > > > >+ http://opensource.org/licenses/bsd-license.php
> > > > > > >+
> > > > > > >+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN
> > > > "AS
> > > > > > IS"
> > > > > > >BASIS,
> > > > > > >+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND,
> > > > EITHER
> > > > > > >EXPRESS OR IMPLIED.
> > > > > > >+
> > > > > > >+
> > > > > > >+**/
> > > > > > >+
> > > > > > >+#ifndef _PCI_OVERRIDE2_H_
> > > > > > >+#define _PCI_OVERRIDE2_H_
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// EFI_PCI_OVERRIDE_PROTOCOL has the same structure with
> > > > > > >EFI_PCI_PLATFORM_PROTOCOL
> > > > > > >+///
> > > > > > >+#include <Protocol/PciPlatform2.h>
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Global ID for the EFI_PCI_OVERRIDE_PROTOCOL /// #define
> > > > > > >+EFI_PCI_OVERRIDE2_GUID \
> > > > > > >+ { \
> > > > > > >+ 0xb9d5ea1, 0x66cb, 0x4546, {0xb0, 0xbb, 0x5c, 0x6d,
> > > > > > >+0xae, 0xd9,
> > > > > > 0x42, 0x47}
> > > > > > >\
> > > > > > >+ }
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Declaration for EFI_PCI_OVERRIDE_PROTOCOL /// typedef
> > > > > > >+EFI_PCI_PLATFORM_PROTOCOL2
> > > > > > EFI_PCI_OVERRIDE_PROTOCOL2;
> > > > > > >+
> > > > > > >+
> > > > > > >+extern EFI_GUID gEfiPciOverrideProtocol2Guid;
> > > > > > >+
> > > > > > >+#endif
> > > > > > >diff --git a/MdePkg/Include/Protocol/PciPlatform2.h
> > > > > > >b/MdePkg/Include/Protocol/PciPlatform2.h
> > > > > > >new file mode 100644
> > > > > > >index 0000000000..717938e68d
> > > > > > >--- /dev/null
> > > > > > >+++ b/MdePkg/Include/Protocol/PciPlatform2.h
> > > > > > >@@ -0,0 +1,393 @@
> > > > > > >+/** @file
> > > > > > >+ This file declares PCI Platform Protocol that provide the
> > > > > > >+interface
> > > > > > between
> > > > > > >+ the PCI bus driver/PCI Host Bridge Resource Allocation
> > > > > > >+ driver and a
> > > > > > >platform-specific
> > > > > > >+ driver to describe the unique features of a platform.
> > > > > > >+ This protocol is optional.
> > > > > > >+
> > > > > > >+Copyright (c) 2019, Intel Corporation. All rights
> > > > > > >+reserved.<BR> This program and the accompanying materials
> > > > > > >+are licensed and made
> > > > > > >available under
> > > > > > >+the terms and conditions of the BSD License that accompanies
> > > > > > >+this
> > > > > > >distribution.
> > > > > > >+The full text of the license may be found at
> > > > > > >+http://opensource.org/licenses/bsd-license.php.
> > > > > > >+
> > > > > > >+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN
> > "AS
> > > > IS"
> > > > > > >BASIS,
> > > > > > >+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND,
> > EITHER
> > > > > > >EXPRESS OR IMPLIED.
> > > > > > >+
> > > > > > >+
> > > > > > >+**/
> > > > > > >+
> > > > > > >+#ifndef _PCI_PLATFORM2_H_
> > > > > > >+#define _PCI_PLATFORM2_H_
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This file must be included because the
> > > > > > EFI_PCI_PLATFORM_PROTOCOL2
> > > > > > >uses
> > > > > > >+/// EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE.
> > > > > > >+///
> > > > > > >+#include <Protocol/PciHostBridgeResourceAllocation.h>
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Reuse the existing definition to maintain backward
> > > > > > >+compatibility /// #include <Protocol/PciPlatform.h>
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Global ID for the EFI_PCI_PLATFORM_PROTOCOL2.
> > > > > > >+///
> > > > > > >+#define EFI_PCI_PLATFORM_PROTOCOL2_GUID \
> > > > > > >+ { \
> > > > > > >+ 0x787b0367, 0xa945, 0x4d60, {0x8d, 0x34, 0xb9, 0xd1,
> > > > > > >+0x88,
> > > > 0xd2,
> > > > > > 0xd0,
> > > > > > >0xb6} \
> > > > > > >+ }
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// As per the present definition and specification of this
> > > > > > >+protocol, the
> > > > > > major
> > > > > > >+/// version is 1, and minor version is 1. Any driver
> > > > > > >+utilizing this protocol /// shall use these versions number
> > > > > > >+to maintain the backward
> > > > > > compatibility
> > > > > > >as
> > > > > > >+/// per its specification changes in future.
> > > > > > >+///
> > > > > > >+enum EfiPciPlatformProtocolVersion {
> > > > > > >+ EFI_PCI_PLATFORM_PROTOCOL_MAJOR_VERSION = 1,
> > > > > > >+ EFI_PCI_PLATFORM_PROTOCOL_MINOR_VERSION = 1 };
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Forward declaration for EFI_PCI_PLATFORM_PROTOCOL2.
> > > > > > >+///
> > > > > > >+typedef struct _EFI_PCI_PLATFORM_PROTOCOL2
> > > > > > >EFI_PCI_PLATFORM_PROTOCOL2;
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Following are the data types for
> > > > > > >EFI_PCI_PLATYFORM_EXTENDED_POLICY
> > > > > > >+/// each for the PCI standard feature and its corresponding
> > > > > > >+bitmask /// representing the valid combinations of PCI
> > > > > > >+attributes ///
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature Maximum Payload Size
> (MPS).
> > > > > > >+Refer to PCI Base
> > > > > > >Specification
> > > > > > >+/// 4, (chapter 7.5.3.4) on how to translate the below EFI
> > > > > > >+encodings as per
> > > > > > >the
> > > > > > >+/// PCI hardware terminology. If this data member value is
> > > > > > >+returned as 0
> > > > > > >than
> > > > > > >+/// there is no platform policy to override, this feature
> > > > > > >+would be enabled
> > > > > > as
> > > > > > >+/// per its PCI specification based on the device capabilities.
> > > > > > >+Below is it /// data type and the macro definitions which
> > > > > > >+the driver uses for
> > > > > > interpreting
> > > > > > >+/// the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_MAX_PAYLOAD_SIZE;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_AUTO 0x00
> > //No
> > > > > > request for
> > > > > > >override
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_128B 0x01 //set
> > to
> > > > > > default
> > > > > > >128B
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_256B 0x02 //set
> > to
> > > > > > 256B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_512B 0x03 //set
> > to
> > > > > > 512B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_1024B 0x04 //set
> > to
> > > > > > 1024B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_2048B 0x05 //set
> > to
> > > > > > 2048B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_PAYLOAD_SIZE_4096B 0x06 //set
> > to
> > > > > > 4096B if
> > > > > > >applicable
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature Maximum Read
> > > > > > >+Request Size
> > (MRRS).
> > > > > > >+Refer to PCI
> > > > > > >Base
> > > > > > >+/// Specification 4, (chapter 7.5.3.4) on how to translate
> > > > > > >+the below EFI /// encodings as per the PCI hardware
> > > > > > >+terminology. If this data member
> > > > > > >value
> > > > > > >+/// is returned as 0 than there is no platform policy to
> > > > > > >+override, this
> > > > > > feature
> > > > > > >+/// would be enabled as per its PCI specification based on
> > > > > > >+the device
> > > > > > >capabilities.
> > > > > > >+/// Below is it data type and the macro definitions which
> > > > > > >+the driver uses
> > > > > > for
> > > > > > >+/// interpreting the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_MAX_READ_REQ_SIZE;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_AUTO 0x00
> > //No
> > > > > > request
> > > > > > >for override
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_128B 0x01 //set
> > to
> > > > > > default
> > > > > > >128B
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_256B 0x02 //set
> > to
> > > > > > 256B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_512B 0x03 //set
> > to
> > > > > > 512B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_1024B 0x04 //set
> > to
> > > > > > 1024B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_2048B 0x05 //set
> > to
> > > > > > 2048B if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_MAX_READ_REQ_SIZE_4096B 0x06 //set
> > to
> > > > > > 4096B if
> > > > > > >applicable
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature Extended Tags.
> > > > > > >+Refer to PCI Base Specification /// 4, (chapter 7.5.3.4) on
> > > > > > >+how to translate the below EFI encodings as per
> > > > > > >the
> > > > > > >+/// PCI hardware terminology. If this data member value is
> > > > > > >+returned as 0
> > > > > > >than
> > > > > > >+/// there is no platform policy to override, this feature
> > > > > > >+would be enabled
> > > > > > as
> > > > > > >+/// per its PCI specification based on the device capabilities.
> > > > > > >+Below is it /// data type and the macro definitions which
> > > > > > >+the driver uses for
> > > > > > interpreting
> > > > > > >+/// the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_EXTENDED_TAG;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_EXTENDED_TAG_AUTO 0x00 //No
> > > > request
> > > > > > for
> > > > > > >override
> > > > > > >+#define EFI_PCI_CONF_EXTENDED_TAG_5BIT 0x01 //set to
> > > > default
> > > > > > 5-bit
> > > > > > >+#define EFI_PCI_CONF_EXTENDED_TAG_8BIT 0x02 //set to
> > 8-bit
> > > > if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_EXTENDED_TAG_10BIT 0x03 //set to
> > 10-bit
> > > > if
> > > > > > >applicable
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe link's Active
> > > > > > >+State Power Mgmt (ASPM). Refer
> > > > > > to
> > > > > > >PCI Base
> > > > > > >+/// Specification 4, (chapter 7.5.3.7) on how to translate
> > > > > > >+the below EFI /// encodings as per the PCI hardware
> > > > > > >+terminology. If this data member
> > > > > > >value
> > > > > > >+/// is returned as 0 than there is no platform policy to
> > > > > > >+override, this
> > > > > > feature
> > > > > > >+/// would be enabled as per its PCI specification based on
> > > > > > >+the device
> > > > > > >capabilities.
> > > > > > >+/// Below is it data type and the macro definitions which
> > > > > > >+the driver uses
> > > > > > for
> > > > > > >+/// interpreting the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_ASPM_SUPPORT;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_ASPM_AUTO 0x00 //No
> > request
> > > > for
> > > > > > override
> > > > > > >+#define EFI_PCI_CONF_ASPM_DISABLE 0x01 //set to
> > > > default
> > > > > > disable
> > > > > > >state
> > > > > > >+#define EFI_PCI_CONF_ASPM_L0s_SUPPORT 0x02 //set to
> > L0s
> > > > state
> > > > > > >+#define EFI_PCI_CONF_ASPM_L1_SUPPORT 0x03 //set to
> > L1
> > > > state
> > > > > > >+#define EFI_PCI_CONF_ASPM_L0S_L1_SUPPORT 0x04 //set to
> > L0s
> > > > and
> > > > > > L1
> > > > > > >state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's
> > > > > > >+Relax Ordering enable/disable. Refer
> > > > > > to
> > > > > > >PCI Base
> > > > > > >+/// Specification 4, (chapter 7.5.3.4) on how to translate
> > > > > > >+the below EFI /// encodings as per the PCI hardware
> > > > > > >+terminology. If this data member
> > > > > > >value
> > > > > > >+/// is returned as 0 than there is no platform policy to
> > > > > > >+override, this
> > > > > > feature
> > > > > > >+/// would be enabled as per its PCI specification based on
> > > > > > >+the device
> > > > > > >capabilities.
> > > > > > >+/// Below is it data type and the macro definitions which
> > > > > > >+the driver uses
> > > > > > for
> > > > > > >+/// interpreting the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_RELAX_ORDER;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_RO_AUTO 0x00 //No request for
> > > > override
> > > > > > >+#define EFI_PCI_CONF_RO_DISABLE 0x01 //set to default
> > disable
> > > > > > state
> > > > > > >+#define EFI_PCI_CONF_RO_ENABLE 0x02 //set to enable
> > state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's
> > > > > > >+No-Snoop enable/disable. Refer to PCI
> > > > > > >Base
> > > > > > >+/// Specification 4, (chapter 7.5.3.4) on how to translate
> > > > > > >+the below EFI /// encodings as per the PCI hardware
> > > > > > >+terminology. If this data member
> > > > > > >value
> > > > > > >+/// is returned as 0 than there is no platform policy to
> > > > > > >+override, this
> > > > > > feature
> > > > > > >+/// would be enabled as per its PCI specification based on
> > > > > > >+the device
> > > > > > >capabilities.
> > > > > > >+/// Below is it data type and the macro definitions which
> > > > > > >+the driver uses
> > > > > > for
> > > > > > >+/// interpreting the platform policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_NO_SNOOP;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_NS_AUTO 0x00 //No request for
> > > > override
> > > > > > >+#define EFI_PCI_CONF_NS_DISABLE 0x01 //set to default
> > disable
> > > > state
> > > > > > >+#define EFI_PCI_CONF_NS_ENABLE 0x02 //set to enable state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe link's Clock
> > > > > > >+configuration is common or
> > > > > > discrete.
> > > > > > >+/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on
> > > > > > >+how to translate
> > > > > > >the
> > > > > > >+/// below EFI encodings as per the PCI hardware terminology.
> > > > > > >+If this data
> > > > > > >member
> > > > > > >+/// value is returned as 0 than there is no platform policy
> > > > > > >+to override, this /// feature would be enabled as per its
> > > > > > >+PCI specification based on the
> > > > > > device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_COMMON_CLOCK_CFG;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_CLK_CFG_AUTO 0x00 //No request
> > for
> > > > > > override
> > > > > > >+#define EFI_PCI_CONF_CLK_CFG_ASYNCH 0x01 //set to
> > default
> > > > > > >asynchronous clock
> > > > > > >+#define EFI_PCI_CONF_CLK_CFG_COMMON 0x02 //set to
> > > > common
> > > > > > clock
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe link's
> > > > > > >+Extended Synch enable or
> > > > disable.
> > > > > > >+/// Refer to PCI Base Specification 4, (chapter 7.5.3.7) on
> > > > > > >+how to translate
> > > > > > >the
> > > > > > >+/// below EFI encodings as per the PCI hardware terminology.
> > > > > > >+If this data
> > > > > > >member
> > > > > > >+/// value is returned as 0 than there is no platform policy
> > > > > > >+to override, this /// feature would be enabled as per its
> > > > > > >+PCI specification based on the
> > > > > > device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_EXTENDED_SYNCH;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_EXT_SYNCH_AUTO 0x00 //No
> > request
> > > > for
> > > > > > override
> > > > > > >+#define EFI_PCI_CONF_EXT_SYNCH_DISABLE 0x01 //set to
> > default
> > > > > > disable
> > > > > > >state
> > > > > > >+#define EFI_PCI_CONF_EXT_SYNCH_ENABLE 0x02 //set to
> > enable
> > > > > > state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's
> > > > > > >+AtomicOp Requester enable or
> > > > > > disable.
> > > > > > >+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on
> > > > > > >+how to
> > > > > > translate
> > > > > > >the
> > > > > > >+/// below EFI encodings as per the PCI hardware terminology.
> > > > > > >+If this data
> > > > > > >member
> > > > > > >+/// value is returned as 0 than there is no platform policy
> > > > > > >+to override, this /// feature would be enabled as per its
> > > > > > >+PCI specification based on the
> > > > > > device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_ATOMIC_OP;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_ATOMIC_OP_AUTO 0x00 //No
> > request
> > > > for
> > > > > > >override
> > > > > > >+#define EFI_PCI_CONF_ATOMIC_OP_DISABLE 0x01 //set to
> > default
> > > > > > disable
> > > > > > >state
> > > > > > >+#define EFI_PCI_CONF_ATOMIC_OP_ENABLE 0x02 //set to
> > enable
> > > > > > state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's LTR
> > > > > > >+Mechanism
> > > > enable/disable.
> > > > > > >+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on
> > > > > > >+how to
> > > > > > translate
> > > > > > >the
> > > > > > >+/// below EFI encodings as per the PCI hardware terminology.
> > > > > > >+If this data
> > > > > > >member
> > > > > > >+/// value is returned as 0 than there is no platform policy
> > > > > > >+to override, this /// feature would be enabled as per its
> > > > > > >+PCI specification based on the
> > > > > > device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_LTR;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_LTR_AUTO 0x00 //No request for
> > > > override
> > > > > > >+#define EFI_PCI_CONF_LTR_DISABLE 0x01 //set to default
> > disable
> > > > > > >+state #define EFI_PCI_CONF_LTR_ENABLE 0x02 //set to enable
> > > > state
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's
> > > > > > >+Precision Time Measurement (PTM)
> > > > > > >enable/disable.
> > > > > > >+/// Refer to PCI Base Specification 4, (chapter 7.5.3.16) on
> > > > > > >+how to
> > > > > > translate
> > > > > > >the
> > > > > > >+/// below EFI encodings as per the PCI hardware terminology.
> > > > > > >+If this data
> > > > > > >member
> > > > > > >+/// value is returned as 0 than there is no platform policy
> > > > > > >+to override, this /// feature would be enabled as per its
> > > > > > >+PCI specification based on the
> > > > > > device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_PTM;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_PTM_AUTO 0x00 //No request for
> > > > > > override
> > > > > > >+#define EFI_PCI_CONF_PTM_DISABLE 0x01 //set to default
> > > > disable
> > > > > > state
> > > > > > >+#define EFI_PCI_CONF_PTM_ENABLE 0x02 //set to enable
> > state
> > > > > > only
> > > > > > >+#define EFI_PCI_CONF_PTM_ROOT_SEL 0x02 //set to root
> > select
> > > > &
> > > > > > enable
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This data type is to retrieve the PCI device platform
> > > > > > >+policy for the PCI- /// compliant feature PCIe Device's
> > > > > > >+Completion Timeout
> > > > > > >+(CTO) set to
> > > > > > >supported ranges
> > > > > > >+/// or disable. Refer to PCI Base Specification 4, (chapter
> > > > > > >+7.5.3.16) on how
> > > > > > to
> > > > > > >+/// translate the below EFI encodings as per the PCI
> > > > > > >+hardware
> > > > terminology.
> > > > > > If
> > > > > > >this
> > > > > > >+/// data member value is returned as 0 than there is no
> > > > > > >+platform policy to
> > > > > > >override,
> > > > > > >+/// this feature would be enabled as per its PCI
> > > > > > >+specification based on the
> > > > > > >device
> > > > > > >+/// capabilities. Below is its data type and the macro
> > > > > > >+definitions which the /// driver uses for interpreting the
> > > > > > >+platform
> > policy.
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_CTO_SUPPORT;
> > > > > > >+
> > > > > > >+#define EFI_PCI_CONF_CTO_AUTO 0x00 //No request
> > for
> > > > > > override
> > > > > > >+#define EFI_PCI_CONF_CTO_DEFAULT 0x01 //set to default
> > > > range
> > > > > > of 5us
> > > > > > >to 50ms if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_A1 0x02 //set to range
> > of
> > > > 50us
> > > > > > to
> > > > > > >100us if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_A2 0x03 //set to range
> > of
> > > > 1ms
> > > > > > to
> > > > > > >10ms if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_B1 0x04 //set to range
> > of
> > > > > > 16ms to
> > > > > > >55ms if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_B2 0x05 //set to range
> > of
> > > > > > 65ms to
> > > > > > >210ms if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_C1 0x06 //set to range
> > of
> > > > > > 260ms to
> > > > > > >900ms if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_C2 0x07 //set to range
> > of
> > > > 1s
> > > > > > to 3.5s if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_D1 0x08 //set to range
> > of
> > > > 4s
> > > > > > to 13s if
> > > > > > >applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_RANGE_D2 0x09 //set to range
> > of
> > > > 17s
> > > > > > to 64s
> > > > > > >if applicable
> > > > > > >+#define EFI_PCI_CONF_CTO_DET_DISABLE 0x10 //set to CTO
> > > > detection
> > > > > > >disable if applicable
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// Reserves for future use
> > > > > > >+///
> > > > > > >+typedef UINT8 EFI_PCI_CONF_RESERVES;
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// The EFI_PCI_PLATYFORM_EXTENDED_POLICY is altogether
> > > > 128-byte
> > > > > > size,
> > > > > > >with each
> > > > > > >+/// byte field representing one PCI standerd feature defined
> > > > > > >+in the PCI
> > > > > > >Express Base
> > > > > > >+/// Specification 4.0, version 1.0.
> > > > > > >+///
> > > > > > >+typedef struct {
> > > > > > >+ EFI_PCI_CONF_MAX_PAYLOAD_SIZE DeviceCtlMPS;
> > > > > > >+ EFI_PCI_CONF_MAX_READ_REQ_SIZE DeviceCtlMRRS;
> > > > > > >+ EFI_PCI_CONF_EXTENDED_TAG DeviceCtlExtTag;
> > > > > > >+ EFI_PCI_CONF_RELAX_ORDER DeviceCtlRelaxOrder;
> > > > > > >+ EFI_PCI_CONF_NO_SNOOP DeviceCtlNoSnoop;
> > > > > > >+ EFI_PCI_CONF_ASPM_SUPPORT LinkCtlASPMState;
> > > > > > >+ EFI_PCI_CONF_COMMON_CLOCK_CFG LinkCtlCommonClkCfg;
> > > > > > >+ EFI_PCI_CONF_EXTENDED_SYNCH LinkCtlExtSynch;
> > > > > > >+ EFI_PCI_CONF_ATOMIC_OP DeviceCtl2AtomicOp;
> > > > > > >+ EFI_PCI_CONF_LTR DeviceCtl2LTR;
> > > > > > >+ EFI_PCI_CONF_PTM PTMControl;
> > > > > > >+ EFI_PCI_CONF_CTO_SUPPORT CTOsupport;
> > > > > > >+ EFI_PCI_CONF_RESERVES Reserves[116];
> > > > > > >+} EFI_PCI_PLATFORM_EXTENDED_POLICY;
> > > > > > >+
> > > > > > >+/**
> > > > > > >+ Retrieves the PCI device-specific platform policy
> > > > > > >+regarding
> > > > > > enumeration.
> > > > > > >+
> > > > > > >+ The PCI Bus driver and PCI Host Bridge Resource Allocation
> > > > > > >+ Protocol
> > > > > > drivers
> > > > > > >+ can call this member function to retrieve the platform
> > > > > > >+ policies specific
> > > > > > to
> > > > > > >+ PCI device, regarding the PCI enumeration.
> > > > > > >+
> > > > > > >+ The GetDevicePolicy() function retrieves the platform
> > > > > > >+ policy for a
> > > > > > particular
> > > > > > >+ component regarding PCI enumeration. The PCI bus driver
> > > > > > >+ and the PCI
> > > > > > Host
> > > > > > >Bridge
> > > > > > >+ Resource Allocation Protocol driver can call this member
> > > > > > >+ function to
> > > > > > retrieve
> > > > > > >+ the policy.
> > > > > > >+ The existing GetPlatformPolicy() member function is used
> > > > > > >+ by the PCI Bus
> > > > > > >driver
> > > > > > >+ to program the legacy ranges, the data that is returned by
> > > > > > >+ that member
> > > > > > >function
> > > > > > >+ determines the supported attributes that are returned by
> > > > > > >+ the
> > > > > > >+ EFI_PCI_IO_PROTOCOL.Attributes() function.
> > > > > > >+ The GetDevicePolicy() member function is meant to return
> > > > > > >+ data about
> > > > > > >other PCI
> > > > > > >+ compliant features which would be supported by the PCI Bus
> > > > > > >+ driver in
> > > > > > >future;
> > > > > > >+ like for example the MPS, MRRS, Extended Tag, ASPM, etc.
> > > > > > >+ The details
> > > > > > >about
> > > > > > >+ this PCI features can be obtained from the PCI Base
> > > > > > >+ Specification
> > > > 4.x.
> > > > > > The
> > > > > > >+ EFI encodings for these feature are defined in the
> > > > > > >+ EFI_PCI_PLATFORM_EXTENDED_POLICY, see the Related
> > Definition
> > > > > > section
> > > > > > >for this.
> > > > > > >+ This member function will use the associated EFI handle of
> > > > > > >+ the PCI IO
> > > > > > >Protocol
> > > > > > >+ to determine the physical PCI device within the chipset,
> > > > > > >+ to return its device-specific platform policies.
> > > > > > >+
> > > > > > >+ @param[in] This Pointer to the
> > > > > > EFI_PCI_PLATFORM_PROTOCOL2
> > > > > > >instance.
> > > > > > >+ @param[in] PciDevice The associated PCI IO Protocol
> > handle
> > > > of
> > > > > > the PCI
> > > > > > >+ device. Type EFI_HANDLE is
> > defined
> > > > in
> > > > > > >+ InstallProtocolInterface() in
> > > > > > >+ the
> > > > UEFI
> > > > > > 2.1
> > > > > > >+ Specification @param[in]
> > > > PciExtPolicy
> > > > > > >+ The platform policy with respect to other
> > > > > > PCI
> > > > > > >features
> > > > > > >+ like, the MPS, MRRS, etc. Type
> > > > > > >EFI_PCI_PLATFORM_EXTENDED_POLICY
> > > > > > >+ is defined in "Related
> > Definitions"
> > > > > > below.
> > > > > > >+
> > > > > > >+
> > > > > > >+ @retval EFI_SUCCESS The function completed
> > > > > > successfully, may
> > > > > > >returns
> > > > > > >+ platform policy data for
> > the
> > > > given
> > > > > > PCI component
> > > > > > >+ @retval EFI_UNSUPPORTED PCI component belongs to
> > PCI
> > > > > > topology but
> > > > > > >not
> > > > > > >+ part of chipset to provide
> > the
> > > > > > platform policy
> > > > > > >+ @retval EFI_INVALID_PARAMETER If any of the input
> > parameters
> > > > are
> > > > > > >passed with
> > > > > > >+ invalid data
> > > > > > >+
> > > > > > >+ **/
> > > > > > >+typedef
> > > > > > >+EFI_STATUS
> > > > > > >+(EFIAPI * EFI_PCI_PLATFORM_GET_DEVICE_POLICY) (
> > > > > > >+ IN CONST EFI_PCI_PLATFORM_PROTOCOL2 *This,
> > > > > > >+ IN EFI_HANDLE PciDevice,
> > > > > > >+ OUT EFI_PCI_PLATFORM_EXTENDED_POLICY *PciExtPolicy );
> > > > > > >+
> > > > > > >+///
> > > > > > >+/// This protocol provides the interface between the PCI bus
> > > > > > >+driver/PCI
> > > > > > Host
> > > > > > >+/// Bridge Resource Allocation driver and a
> > > > > > >+platform-specific driver to
> > > > > > >describe
> > > > > > >+/// the unique features of a platform.
> > > > > > >+///
> > > > > > >+struct _EFI_PCI_PLATFORM_PROTOCOL2 {
> > > > > > >+ ///
> > > > > > >+ /// The notification from the PCI bus enumerator to the
> > > > > > >+platform that it
> > > > > > is
> > > > > > >about to
> > > > > > >+ /// enter a certain phase during the enumeration process.
> > > > > > >+ ///
> > > > > > >+ EFI_PCI_PLATFORM_PHASE_NOTIFY PlatformNotify;
> > > > > > >+ ///
> > > > > > >+ /// The notification from the PCI bus enumerator to the
> > > > > > >+ platform for
> > > > > > each
> > > > > > >PCI
> > > > > > >+ /// controller at several predefined points during PCI
> > > > > > >+ controller
> > > > > > initialization.
> > > > > > >+ ///
> > > > > > >+ EFI_PCI_PLATFORM_PREPROCESS_CONTROLLER
> > > > > > PlatformPrepController;
> > > > > > >+ ///
> > > > > > >+ /// Retrieves the platform policy regarding enumeration.
> > > > > > >+ ///
> > > > > > >+ EFI_PCI_PLATFORM_GET_PLATFORM_POLICY
> > > > GetPlatformPolicy;
> > > > > > >+ ///
> > > > > > >+ /// Gets the PCI device's option ROM from a
> > > > > > >+ platform-specific
> > > > location.
> > > > > > >+ ///
> > > > > > >+ EFI_PCI_PLATFORM_GET_PCI_ROM GetPciRom;
> > > > > > >+ ///
> > > > > > >+ /// Retrieves the PCI device-specific platform policy
> > > > > > >+ regarding
> > > > > > enumeration.
> > > > > > >+ ///
> > > > > > >+ EFI_PCI_PLATFORM_GET_DEVICE_POLICY
> > GetDevicePolicy;
> > > > > > >+ ///
> > > > > > >+ /// The major version of this PCI Platform Protocol ///
> > > > > > >+ UINT8 MajorVersion;
> > > > > > >+ ///
> > > > > > >+ /// The minor version of this PCI Platform Protocol ///
> > > > > > >+ UINT8 MinorVersion;
> > > > > > >+
> > > > > > >+};
> > > > > > >+
> > > > > > >+extern EFI_GUID gEfiPciPlatformProtocol2Guid;
> > > > > > >+
> > > > > > >+#endif
> > > > > > >diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index
> > > > > > >b382efd578..670b448031 100644
> > > > > > >--- a/MdePkg/MdePkg.dec
> > > > > > >+++ b/MdePkg/MdePkg.dec
> > > > > > >@@ -1013,6 +1013,12 @@
> > > > > > > ## Include/Protocol/PciOverride.h
> > > > > > > gEfiPciOverrideProtocolGuid = { 0xb5b35764, 0x460c,
> > 0x4a06,
> > > > > > {0x99, 0xfc,
> > > > > > >0x77, 0xa1, 0x7c, 0x1b, 0x5c, 0xeb }}
> > > > > > >
> > > > > > >+ ## Include/Protocol/PciPlatform2.h
> > > > > > >+ gEfiPciPlatformProtocol2Guid = { 0x787b0367, 0xa945,
> > 0x4d60,
> > > > > > { 0x8d, 0x34,
> > > > > > >0xb9, 0xd1, 0x88, 0xd2, 0xd0, 0xb6 }}
> > > > > > >+
> > > > > > >+ ## Include/Protocol/PciOverride2.h
> > > > > > >+ gEfiPciOverrideProtocol2Guid = { 0xb9d5ea1, 0x66cb,
> > 0x4546,
> > > > > > { 0xb0, 0xbb,
> > > > > > >0x5c, 0x6d, 0xae, 0xd9, 0x42, 0x47 }}
> > > > > > >+
> > > > > > > ## Include/Protocol/PciEnumerationComplete.h
> > > > > > > gEfiPciEnumerationCompleteProtocolGuid = { 0x30cfe3e7,
> > > > 0x3de1,
> > > > > > 0x4586,
> > > > > > >{0xbe, 0x20, 0xde, 0xab, 0xa1, 0xb3, 0xb7, 0x93}}
> > > > > > >
> > > > > > >--
> > > > > > >2.21.0.windows.1
> > > > > >
> > > > > >
> > > > > >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#44526): https://edk2.groups.io/g/devel/message/44526
Mute This Topic: https://groups.io/mt/32639691/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list