[edk2-devel] [PATCH 1/3] UefiCpuPkg/PiSmmCpu: Add Internal function IsStaticPageTableEnabled

[Ni, Ray]

> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Laszlo Ersek
> Sent: Monday, July 29, 2019 7:33 PM
> To: devel at edk2.groups.io; Ni, Ray <ray.ni at intel.com>
> Subject: Re: [edk2-devel] [PATCH 1/3] UefiCpuPkg/PiSmmCpu: Add Internal function IsStaticPageTableEnabled
> 
> Hi Ray,
> 
> On 07/27/19 05:28, Ni, Ray wrote:
> > The internal function reflects the status whether static page table
> > is enabled.
> >
> > Signed-off-by: Ray Ni <ray.ni at intel.com>
> > Cc: Laszlo Ersek <lersek at redhat.com>
> > Cc: Eric Dong <eric.dong at intel.com.
> > ---
> >  UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c   | 16 ++++++++++++++++
> >  UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h | 15 +++++++++++++++
> >  UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c    | 16 ++++++++++++++++
> >  3 files changed, 47 insertions(+)
> >
> > diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c b/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c
> > index 05fb455936..2a9af4b77d 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/PageTbl.c
> > @@ -28,6 +28,22 @@ EnableCet (
> >    VOID
> >    );
> >
> > +/**
> > +  Return whether Static Page Table is enabled.
> > +
> > +  Note: Static Page Table is always disabled for IA32 build.
> > +
> > +  @retval TRUE  Static Page Table is enabled.
> > +  @retval FALSE Static Page Table is disabled.
> > +**/
> > +BOOLEAN
> > +IsStaticPageTableEnabled (
> > +  VOID
> > +  )
> > +{
> > +  return FALSE;
> > +}
> > +
> >  /**
> >    Create PageTable for SMM use.
> >
> > diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > index 186809f431..14b7676c16 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
> > @@ -1267,6 +1267,21 @@ EFIAPI
> >  PiSmmCpuSmiEntryFixupAddress (
> >   );
> >
> > +
> > +/**
> > +  Return whether Static Page Table is enabled.
> > +
> > +  Note: Static Page Table is always disabled for IA32 build.
> > +
> > +  @retval TRUE  Static Page Table is enabled.
> > +  @retval FALSE Static Page Table is disabled.
> > +**/
> > +BOOLEAN
> > +IsStaticPageTableEnabled (
> > +  VOID
> > +  )
> > +;
> > +
> >  /**
> >    This function reads CR2 register when on-demand paging is enabled
> >    for 64 bit and no action for 32 bit.
> > diff --git a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c
> > index a3b62f7787..18e3f9e08d 100644
> > --- a/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c
> > +++ b/UefiCpuPkg/PiSmmCpuDxeSmm/X64/PageTbl.c
> > @@ -37,6 +37,22 @@ EnableCet (
> >    VOID
> >    );
> >
> > +/**
> > +  Return whether Static Page Table is enabled.
> > +
> > +  Note: Static Page Table is always disabled for IA32 build.
> > +
> > +  @retval TRUE  Static Page Table is enabled.
> > +  @retval FALSE Static Page Table is disabled.
> > +**/
> > +BOOLEAN
> > +IsStaticPageTableEnabled (
> > +  VOID
> > +  )
> > +{
> > +  return mCpuSmmStaticPageTable;
> > +}
> > +
> >  /**
> >    Check if 1-GByte pages is supported by processor or not.
> >
> >
> 
> I like the approach in this patch; however I think the IA32
> implementation (and comments) are wrong. The function should return
> constant TRUE on IA32.
> 
> "static paging" means that all page tables used in SMM are built in
> advance. When "static paging" is off (= "dynamic paging" is enabled),
> then page tables are built in SMM on-demand, based on individual page
> faults. (This is my understanding anyway.)
> 
> And in the IA32 build, the page tables are always built in advance, to
> my understanding. Hence "static paging" should be reported as "on".

Your understanding to the meaning of "static paging" is correct.
But later commit c60d36b4d1ee1f69b7cca897d3621dfa951895c2
* UefiCpuPkg/SmmCpu: Block access-out only when static paging is used
alters the meaning of "static paging" to a platform policy that:
  When it's true, SMM code cannot access out after EndOfDxe;
  When it's false, SMM code can access out after EndOfDxe.

Which means "static paging" can be either TRUE or FALSE in IA32 build.
Which means the PCD description in UefiCpuPkg.dec is wrong after
commit c60d36b4d1ee1f69b7cca897d3621dfa951895c2.
Right now it says:
  ## Indicates if SMM uses static page table.
  #  If enabled, SMM will not use on-demand paging. SMM will build static page table for all memory.
  #  This flag only impacts X64 build, because SMM always builds static page table for IA32.

I was confused when changing the code.

In the V2 patch, I will:
1. update UefiCpuPkg.dec to indicate it's new usage of this PCD. Name of PCD is unchanged but it's also applicable
to IA32 now;
2. No touch to the CR2 save/restore logic because that code depends on whether page table is "built in advance".
3. Add Ia32 version of mCpuSmmStaticPageTable and cache the PCD value to it.
4. Check mCpuSmmStaticPageTable and only protect non-SMRAM and page table when it's TRUE.

Do you agree?



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#44634): https://edk2.groups.io/g/devel/message/44634
Mute This Topic: https://groups.io/mt/32616001/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub  [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-