[edk2-devel] [edk2-platforms: PATCH 06/14] Marvell/Armada7k8k: Add PciExpressLib implementation
Ard Biesheuvel
ard.biesheuvel at linaro.org
Thu May 16 14:02:38 UTC 2019
On Thu, 9 May 2019 at 11:54, Marcin Wojtas <mw at semihalf.com> wrote:
>
> From: Ard Biesheuvel <ard.biesheuvel at linaro.org>
>
> Implement a special version of PciExpressLib that takes the quirky
> nature of the Synopsys Designware PCIe IP into account. In particular,
> we need to ignores config space accesses to all devices on the first
ignore
> bus except device 0, because the broadcast nature of type 0 configuration
> cycles will result in whatever device is in the slot to appear at each
> of the 32 device positions.
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Marcin Wojtas <mw at semihalf.com>
> ---
> Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf | 42 +
> Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c | 1529 ++++++++++++++++++++
> 2 files changed, 1571 insertions(+)
> create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
>
> diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> new file mode 100644
> index 0000000..8f09820
> --- /dev/null
> +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> @@ -0,0 +1,42 @@
> +## @file
> +#
> +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.<BR>
> +# Copyright (c) 2019 Marvell International Ltd. All rights reserved.<BR>
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php.
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x0001001B
> + BASE_NAME = Armada7k8kPciExpressLib
> + FILE_GUID = f0926204-3061-40ed-8261-2aeccc7914c9
> + MODULE_TYPE = BASE
> + VERSION_STRING = 1.0
> + LIBRARY_CLASS = PciExpressLib
> +
> +[Sources]
> + PciExpressLib.c
> +
> +[Packages]
> + ArmPkg/ArmPkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + DebugLib
> + IoLib
> + PcdLib
> +
> +[Pcd]
> + gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress ## CONSUMES
> +
> +[FixedPcd]
> + gArmTokenSpaceGuid.PcdPciBusMin
> + gArmTokenSpaceGuid.PcdPciBusMax
> diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
> new file mode 100644
> index 0000000..8fa2eb6
> --- /dev/null
> +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c
> @@ -0,0 +1,1529 @@
> +/** @file
> +
> + Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
> + Copyright (c) 2019 Marvell International Ltd. All rights reserved.<BR>
> +
> + This program and the accompanying materials
> + are licensed and made available under the terms and conditions of the BSD License
> + which accompanies this distribution. The full text of the license may be found at
> + http://opensource.org/licenses/bsd-license.php.
> +
> + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +
> +**/
> +
> +
> +#include <Base.h>
> +
> +#include <Library/BaseLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PcdLib.h>
> +#include <Library/PciExpressLib.h>
> +
> +/**
> + Assert the validity of a PCI address. A valid PCI address should contain 1's
> + only in the low 28 bits.
> +
> + @param A The address to validate.
> +
> +**/
> +#define ASSERT_INVALID_PCI_ADDRESS(A) \
> + ASSERT (((A) & ~0xfffffff) == 0)
> +
> +/**
> + Registers a PCI device so PCI configuration registers may be accessed after
> + SetVirtualAddressMap().
> +
> + Registers the PCI device specified by Address so all the PCI configuration
> + registers associated with that PCI device may be accessed after SetVirtualAddressMap()
> + is called.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> +
> + @retval RETURN_SUCCESS The PCI device was registered for runtime access.
> + @retval RETURN_UNSUPPORTED An attempt was made to call this function
> + after ExitBootServices().
> + @retval RETURN_UNSUPPORTED The resources required to access the PCI device
> + at runtime could not be mapped.
> + @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
> + complete the registration.
> +
> +**/
> +RETURN_STATUS
> +EFIAPI
> +PciExpressRegisterForRuntimeAccess (
> + IN UINTN Address
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + return RETURN_UNSUPPORTED;
> +}
> +
> +#define ECAM_BUS_SIZE SIZE_1MB
> +#define ECAM_DEV_SIZE SIZE_32KB
> +
> +STATIC
> +BOOLEAN
> +IgnoreBusDeviceFunction (
> + IN UINTN Address
> + )
> +{
> + ASSERT (Address >= FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE);
> + ASSERT (Address < (FixedPcdGet32 (PcdPciBusMax) + 1) * ECAM_BUS_SIZE);
> +
> + //
> + // Type 0 configuration cycles don't contain a b/d/f specifier, and so it
> + // is up to the bus that delivers them to ensure they only end up at the
> + // correct device/function. Sadly, the Synopsys IP does not implement this,
> + // and so we have to ignore config space accesses for all devices on the
> + // first bus except device 0.
> + //
This is not entirely true. Type 0 PCIe config TLPs (as opposed to
legacy PCI bus cycles) do contain b/d/f specifiers, but the endpoint
doesn't know its own device number, and so it responds to all of them.
> + return (Address >= (FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE +
> + ECAM_DEV_SIZE) &&
> + Address < (FixedPcdGet32 (PcdPciBusMin) + 1) * ECAM_BUS_SIZE);
> +}
> +
> +/**
> + Gets the base address of PCI Express.
> +
> + This internal functions retrieves PCI Express Base Address via a PCD entry
> + PcdPciExpressBaseAddress.
> +
> + @return The base address of PCI Express.
> +
> +**/
> +VOID*
> +GetPciExpressBaseAddress (
> + VOID
> + )
> +{
> + return (VOID*)(UINTN) PcdGet64 (PcdPciExpressBaseAddress);
> +}
> +
> +/**
> + Reads an 8-bit PCI configuration register.
> +
> + Reads and returns the 8-bit PCI configuration register specified by Address.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> +
> + @return The read value from the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressRead8 (
> + IN UINTN Address
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioRead8 ((UINTN) GetPciExpressBaseAddress () + Address);
> +}
> +
> +/**
> + Writes an 8-bit PCI configuration register.
> +
> + Writes the 8-bit PCI configuration register specified by Address with the
> + value specified by Value. Value is returned. This function must guarantee
> + that all PCI read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param Value The value to write.
> +
> + @return The value written to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressWrite8 (
> + IN UINTN Address,
> + IN UINT8 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioWrite8 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> +}
> +
> +/**
> + Performs a bitwise OR of an 8-bit PCI configuration register with
> + an 8-bit value.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 8-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressOr8 (
> + IN UINTN Address,
> + IN UINT8 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioOr8 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> +}
> +
> +/**
> + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
> + value.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 8-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressAnd8 (
> + IN UINTN Address,
> + IN UINT8 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioAnd8 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> +}
> +
> +/**
> + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
> + value, followed a bitwise OR with another 8-bit value.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData,
> + performs a bitwise OR between the result of the AND operation and
> + the value specified by OrData, and writes the result to the 8-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressAndThenOr8 (
> + IN UINTN Address,
> + IN UINT8 AndData,
> + IN UINT8 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioAndThenOr8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field of a PCI configuration register.
> +
> + Reads the bit field in an 8-bit PCI configuration register. The bit field is
> + specified by the StartBit and the EndBit. The value of the bit field is
> + returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If StartBit is greater than 7, then ASSERT().
> + If EndBit is greater than 7, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> +
> + @param Address The PCI configuration register to read.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..7.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..7.
> +
> + @return The value of the bit field read from the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressBitFieldRead8 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioBitFieldRead8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit
> + );
> +}
> +
> +/**
> + Writes a bit field to a PCI configuration register.
> +
> + Writes Value to the bit field of the PCI configuration register. The bit
> + field is specified by the StartBit and the EndBit. All other bits in the
> + destination PCI configuration register are preserved. The new value of the
> + 8-bit register is returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If StartBit is greater than 7, then ASSERT().
> + If EndBit is greater than 7, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..7.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..7.
> + @param Value The new value of the bit field.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressBitFieldWrite8 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT8 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioBitFieldWrite8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + Value
> + );
> +}
> +
> +/**
> + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
> + writes the result back to the bit field in the 8-bit port.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 8-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized. Extra left bits in OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If StartBit is greater than 7, then ASSERT().
> + If EndBit is greater than 7, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..7.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..7.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressBitFieldOr8 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT8 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioBitFieldOr8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
> + AND, and writes the result back to the bit field in the 8-bit register.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 8-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized. Extra left bits in AndData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If StartBit is greater than 7, then ASSERT().
> + If EndBit is greater than 7, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..7.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..7.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressBitFieldAnd8 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT8 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioBitFieldAnd8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData
> + );
> +}
> +
> +/**
> + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
> + bitwise OR, and writes the result back to the bit field in the
> + 8-bit port.
> +
> + Reads the 8-bit PCI configuration register specified by Address, performs a
> + bitwise AND followed by a bitwise OR between the read result and
> + the value specified by AndData, and writes the result to the 8-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized. Extra left bits in both AndData and
> + OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If StartBit is greater than 7, then ASSERT().
> + If EndBit is greater than 7, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..7.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..7.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT8
> +EFIAPI
> +PciExpressBitFieldAndThenOr8 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT8 AndData,
> + IN UINT8 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xff;
> + }
> + return MmioBitFieldAndThenOr8 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a 16-bit PCI configuration register.
> +
> + Reads and returns the 16-bit PCI configuration register specified by Address.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> +
> + @return The read value from the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressRead16 (
> + IN UINTN Address
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioRead16 ((UINTN) GetPciExpressBaseAddress () + Address);
> +}
> +
> +/**
> + Writes a 16-bit PCI configuration register.
> +
> + Writes the 16-bit PCI configuration register specified by Address with the
> + value specified by Value. Value is returned. This function must guarantee
> + that all PCI read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param Value The value to write.
> +
> + @return The value written to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressWrite16 (
> + IN UINTN Address,
> + IN UINT16 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioWrite16 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> +}
> +
> +/**
> + Performs a bitwise OR of a 16-bit PCI configuration register with
> + a 16-bit value.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 16-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressOr16 (
> + IN UINTN Address,
> + IN UINT16 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioOr16 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> +}
> +
> +/**
> + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
> + value.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 16-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressAnd16 (
> + IN UINTN Address,
> + IN UINT16 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioAnd16 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> +}
> +
> +/**
> + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
> + value, followed a bitwise OR with another 16-bit value.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData,
> + performs a bitwise OR between the result of the AND operation and
> + the value specified by OrData, and writes the result to the 16-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressAndThenOr16 (
> + IN UINTN Address,
> + IN UINT16 AndData,
> + IN UINT16 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioAndThenOr16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field of a PCI configuration register.
> +
> + Reads the bit field in a 16-bit PCI configuration register. The bit field is
> + specified by the StartBit and the EndBit. The value of the bit field is
> + returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> + If StartBit is greater than 15, then ASSERT().
> + If EndBit is greater than 15, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> +
> + @param Address The PCI configuration register to read.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..15.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..15.
> +
> + @return The value of the bit field read from the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressBitFieldRead16 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioBitFieldRead16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit
> + );
> +}
> +
> +/**
> + Writes a bit field to a PCI configuration register.
> +
> + Writes Value to the bit field of the PCI configuration register. The bit
> + field is specified by the StartBit and the EndBit. All other bits in the
> + destination PCI configuration register are preserved. The new value of the
> + 16-bit register is returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> + If StartBit is greater than 15, then ASSERT().
> + If EndBit is greater than 15, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..15.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..15.
> + @param Value The new value of the bit field.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressBitFieldWrite16 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT16 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioBitFieldWrite16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + Value
> + );
> +}
> +
> +/**
> + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
> + writes the result back to the bit field in the 16-bit port.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 16-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized. Extra left bits in OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> + If StartBit is greater than 15, then ASSERT().
> + If EndBit is greater than 15, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..15.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..15.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressBitFieldOr16 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT16 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioBitFieldOr16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
> + AND, and writes the result back to the bit field in the 16-bit register.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 16-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized. Extra left bits in AndData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> + If StartBit is greater than 15, then ASSERT().
> + If EndBit is greater than 15, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..15.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..15.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressBitFieldAnd16 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT16 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioBitFieldAnd16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData
> + );
> +}
> +
> +/**
> + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
> + bitwise OR, and writes the result back to the bit field in the
> + 16-bit port.
> +
> + Reads the 16-bit PCI configuration register specified by Address, performs a
> + bitwise AND followed by a bitwise OR between the read result and
> + the value specified by AndData, and writes the result to the 16-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized. Extra left bits in both AndData and
> + OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 16-bit boundary, then ASSERT().
> + If StartBit is greater than 15, then ASSERT().
> + If EndBit is greater than 15, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..15.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..15.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT16
> +EFIAPI
> +PciExpressBitFieldAndThenOr16 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT16 AndData,
> + IN UINT16 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffff;
> + }
> + return MmioBitFieldAndThenOr16 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a 32-bit PCI configuration register.
> +
> + Reads and returns the 32-bit PCI configuration register specified by Address.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> +
> + @return The read value from the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressRead32 (
> + IN UINTN Address
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioRead32 ((UINTN) GetPciExpressBaseAddress () + Address);
> +}
> +
> +/**
> + Writes a 32-bit PCI configuration register.
> +
> + Writes the 32-bit PCI configuration register specified by Address with the
> + value specified by Value. Value is returned. This function must guarantee
> + that all PCI read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param Value The value to write.
> +
> + @return The value written to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressWrite32 (
> + IN UINTN Address,
> + IN UINT32 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioWrite32 ((UINTN) GetPciExpressBaseAddress () + Address, Value);
> +}
> +
> +/**
> + Performs a bitwise OR of a 32-bit PCI configuration register with
> + a 32-bit value.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 32-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressOr32 (
> + IN UINTN Address,
> + IN UINT32 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioOr32 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);
> +}
> +
> +/**
> + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
> + value.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 32-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressAnd32 (
> + IN UINTN Address,
> + IN UINT32 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> +return MmioAnd32 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);
> +}
> +
> +/**
> + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
> + value, followed a bitwise OR with another 32-bit value.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData,
> + performs a bitwise OR between the result of the AND operation and
> + the value specified by OrData, and writes the result to the 32-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> +
> + @param Address The address that encodes the PCI Bus, Device, Function and
> + Register.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressAndThenOr32 (
> + IN UINTN Address,
> + IN UINT32 AndData,
> + IN UINT32 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioAndThenOr32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field of a PCI configuration register.
> +
> + Reads the bit field in a 32-bit PCI configuration register. The bit field is
> + specified by the StartBit and the EndBit. The value of the bit field is
> + returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> + If StartBit is greater than 31, then ASSERT().
> + If EndBit is greater than 31, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> +
> + @param Address The PCI configuration register to read.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..31.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..31.
> +
> + @return The value of the bit field read from the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressBitFieldRead32 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioBitFieldRead32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit
> + );
> +}
> +
> +/**
> + Writes a bit field to a PCI configuration register.
> +
> + Writes Value to the bit field of the PCI configuration register. The bit
> + field is specified by the StartBit and the EndBit. All other bits in the
> + destination PCI configuration register are preserved. The new value of the
> + 32-bit register is returned.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> + If StartBit is greater than 31, then ASSERT().
> + If EndBit is greater than 31, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..31.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..31.
> + @param Value The new value of the bit field.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressBitFieldWrite32 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT32 Value
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioBitFieldWrite32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + Value
> + );
> +}
> +
> +/**
> + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
> + writes the result back to the bit field in the 32-bit port.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise OR between the read result and the value specified by
> + OrData, and writes the result to the 32-bit PCI configuration register
> + specified by Address. The value written to the PCI configuration register is
> + returned. This function must guarantee that all PCI read and write operations
> + are serialized. Extra left bits in OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> + If StartBit is greater than 31, then ASSERT().
> + If EndBit is greater than 31, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..31.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..31.
> + @param OrData The value to OR with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressBitFieldOr32 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT32 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioBitFieldOr32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
> + AND, and writes the result back to the bit field in the 32-bit register.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise AND between the read result and the value specified by AndData, and
> + writes the result to the 32-bit PCI configuration register specified by
> + Address. The value written to the PCI configuration register is returned.
> + This function must guarantee that all PCI read and write operations are
> + serialized. Extra left bits in AndData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> + If StartBit is greater than 31, then ASSERT().
> + If EndBit is greater than 31, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..31.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..31.
> + @param AndData The value to AND with the PCI configuration register.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressBitFieldAnd32 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT32 AndData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioBitFieldAnd32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData
> + );
> +}
> +
> +/**
> + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
> + bitwise OR, and writes the result back to the bit field in the
> + 32-bit port.
> +
> + Reads the 32-bit PCI configuration register specified by Address, performs a
> + bitwise AND followed by a bitwise OR between the read result and
> + the value specified by AndData, and writes the result to the 32-bit PCI
> + configuration register specified by Address. The value written to the PCI
> + configuration register is returned. This function must guarantee that all PCI
> + read and write operations are serialized. Extra left bits in both AndData and
> + OrData are stripped.
> +
> + If Address > 0x0FFFFFFF, then ASSERT().
> + If Address is not aligned on a 32-bit boundary, then ASSERT().
> + If StartBit is greater than 31, then ASSERT().
> + If EndBit is greater than 31, then ASSERT().
> + If EndBit is less than StartBit, then ASSERT().
> + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
> +
> + @param Address The PCI configuration register to write.
> + @param StartBit The ordinal of the least significant bit in the bit field.
> + Range 0..31.
> + @param EndBit The ordinal of the most significant bit in the bit field.
> + Range 0..31.
> + @param AndData The value to AND with the PCI configuration register.
> + @param OrData The value to OR with the result of the AND operation.
> +
> + @return The value written back to the PCI configuration register.
> +
> +**/
> +UINT32
> +EFIAPI
> +PciExpressBitFieldAndThenOr32 (
> + IN UINTN Address,
> + IN UINTN StartBit,
> + IN UINTN EndBit,
> + IN UINT32 AndData,
> + IN UINT32 OrData
> + )
> +{
> + ASSERT_INVALID_PCI_ADDRESS (Address);
> + if (IgnoreBusDeviceFunction (Address)) {
> + return 0xffffffff;
> + }
> + return MmioBitFieldAndThenOr32 (
> + (UINTN) GetPciExpressBaseAddress () + Address,
> + StartBit,
> + EndBit,
> + AndData,
> + OrData
> + );
> +}
> +
> +/**
> + Reads a range of PCI configuration registers into a caller supplied buffer.
> +
> + Reads the range of PCI configuration registers specified by StartAddress and
> + Size into the buffer specified by Buffer. This function only allows the PCI
> + configuration registers from a single PCI function to be read. Size is
> + returned. When possible 32-bit PCI configuration read cycles are used to read
> + from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit
> + and 16-bit PCI configuration read cycles may be used at the beginning and the
> + end of the range.
> +
> + If StartAddress > 0x0FFFFFFF, then ASSERT().
> + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
> + If Size > 0 and Buffer is NULL, then ASSERT().
> +
> + @param StartAddress The starting address that encodes the PCI Bus, Device,
> + Function and Register.
> + @param Size The size in bytes of the transfer.
> + @param Buffer The pointer to a buffer receiving the data read.
> +
> + @return Size read data from StartAddress.
> +
> +**/
> +UINTN
> +EFIAPI
> +PciExpressReadBuffer (
> + IN UINTN StartAddress,
> + IN UINTN Size,
> + OUT VOID *Buffer
> + )
> +{
> + UINTN ReturnValue;
> +
> + ASSERT_INVALID_PCI_ADDRESS (StartAddress);
> + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
> +
> + if (Size == 0) {
> + return Size;
> + }
> +
> + ASSERT (Buffer != NULL);
> +
> + //
> + // Save Size for return
> + //
> + ReturnValue = Size;
> +
> + if ((StartAddress & 1) != 0) {
> + //
> + // Read a byte if StartAddress is byte aligned
> + //
> + *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
> + StartAddress += sizeof (UINT8);
> + Size -= sizeof (UINT8);
> + Buffer = (UINT8*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
> + //
> + // Read a word if StartAddress is word aligned
> + //
> + WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));
> +
> + StartAddress += sizeof (UINT16);
> + Size -= sizeof (UINT16);
> + Buffer = (UINT16*)Buffer + 1;
> + }
> +
> + while (Size >= sizeof (UINT32)) {
> + //
> + // Read as many double words as possible
> + //
> + WriteUnaligned32 ((UINT32 *) Buffer, (UINT32) PciExpressRead32 (StartAddress));
> +
> + StartAddress += sizeof (UINT32);
> + Size -= sizeof (UINT32);
> + Buffer = (UINT32*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT16)) {
> + //
> + // Read the last remaining word if exist
> + //
> + WriteUnaligned16 ((UINT16 *) Buffer, (UINT16) PciExpressRead16 (StartAddress));
> + StartAddress += sizeof (UINT16);
> + Size -= sizeof (UINT16);
> + Buffer = (UINT16*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT8)) {
> + //
> + // Read the last remaining byte if exist
> + //
> + *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);
> + }
> +
> + return ReturnValue;
> +}
> +
> +/**
> + Copies the data in a caller supplied buffer to a specified range of PCI
> + configuration space.
> +
> + Writes the range of PCI configuration registers specified by StartAddress and
> + Size from the buffer specified by Buffer. This function only allows the PCI
> + configuration registers from a single PCI function to be written. Size is
> + returned. When possible 32-bit PCI configuration write cycles are used to
> + write from StartAddress to StartAddress + Size. Due to alignment restrictions,
> + 8-bit and 16-bit PCI configuration write cycles may be used at the beginning
> + and the end of the range.
> +
> + If StartAddress > 0x0FFFFFFF, then ASSERT().
> + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
> + If Size > 0 and Buffer is NULL, then ASSERT().
> +
> + @param StartAddress The starting address that encodes the PCI Bus, Device,
> + Function and Register.
> + @param Size The size in bytes of the transfer.
> + @param Buffer The pointer to a buffer containing the data to write.
> +
> + @return Size written to StartAddress.
> +
> +**/
> +UINTN
> +EFIAPI
> +PciExpressWriteBuffer (
> + IN UINTN StartAddress,
> + IN UINTN Size,
> + IN VOID *Buffer
> + )
> +{
> + UINTN ReturnValue;
> +
> + ASSERT_INVALID_PCI_ADDRESS (StartAddress);
> + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);
> +
> + if (Size == 0) {
> + return 0;
> + }
> +
> + ASSERT (Buffer != NULL);
> +
> + //
> + // Save Size for return
> + //
> + ReturnValue = Size;
> +
> + if ((StartAddress & 1) != 0) {
> + //
> + // Write a byte if StartAddress is byte aligned
> + //
> + PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
> + StartAddress += sizeof (UINT8);
> + Size -= sizeof (UINT8);
> + Buffer = (UINT8*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
> + //
> + // Write a word if StartAddress is word aligned
> + //
> + PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
> + StartAddress += sizeof (UINT16);
> + Size -= sizeof (UINT16);
> + Buffer = (UINT16*)Buffer + 1;
> + }
> +
> + while (Size >= sizeof (UINT32)) {
> + //
> + // Write as many double words as possible
> + //
> + PciExpressWrite32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));
> + StartAddress += sizeof (UINT32);
> + Size -= sizeof (UINT32);
> + Buffer = (UINT32*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT16)) {
> + //
> + // Write the last remaining word if exist
> + //
> + PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
> + StartAddress += sizeof (UINT16);
> + Size -= sizeof (UINT16);
> + Buffer = (UINT16*)Buffer + 1;
> + }
> +
> + if (Size >= sizeof (UINT8)) {
> + //
> + // Write the last remaining byte if exist
> + //
> + PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);
> + }
> +
> + return ReturnValue;
> +}
> --
> 2.7.4
>
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#40796): https://edk2.groups.io/g/devel/message/40796
Mute This Topic: https://groups.io/mt/31553479/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list