[edk2-devel] [edk2-platforms: PATCH 08/14] Marvell/Armada7k8k: Enable PCIE support
Marcin Wojtas
mw at semihalf.com
Thu May 16 14:22:18 UTC 2019
Hi Ard,
czw., 16 maj 2019 o 16:16 Ard Biesheuvel <ard.biesheuvel at linaro.org> napisał(a):
>
> On Thu, 9 May 2019 at 11:54, Marcin Wojtas <mw at semihalf.com> wrote:
> >
> > Wire up the platform libraries to the generic drivers so that we can use
> > PCI devices and UEFI, and leave the controller initialized so that the
> > OS can boot it using a generic driver of its own.
> >
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Marcin Wojtas <mw at semihalf.com>
> > ---
> > Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc | 17 +++++++++++++++--
> > Silicon/Marvell/Armada7k8k/Armada7k8k.fdf | 5 +++++
> > 2 files changed, 20 insertions(+), 2 deletions(-)
> >
> > diff --git a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> > index 545b369..f78a76b 100644
> > --- a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> > +++ b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
> > @@ -70,8 +70,10 @@
> > IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
> > UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
> > CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
> > - PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
> > - PciCf8Lib|MdePkg/Library/BasePciCf8Lib/BasePciCf8Lib.inf
> > + PciLib|MdePkg/Library/BasePciLibPciExpress/BasePciLibPciExpress.inf
> > + PciHostBridgeLib|Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciHostBridgeLib/PciHostBridgeLib.inf
> > + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf
> > + PciExpressLib|Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf
> >
> > # Basic UEFI services libraries
> > UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
> > @@ -407,6 +409,12 @@
> > gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00010000
> > gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00010000
> >
> > + # PCIE
> > + gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress|0xE0000000
> > +
> > + # SoC Configuration Space
> > + gMarvellTokenSpaceGuid.PcdConfigSpaceBaseAddress|0xE0000000
> > +
> > !if $(CAPSULE_ENABLE)
> > [PcdsDynamicExDefault.common.DEFAULT]
> > gEfiSignedCapsulePkgTokenSpaceGuid.PcdEdkiiSystemFirmwareImageDescriptor|{0x0}|VOID*|0x100
> > @@ -520,6 +528,11 @@
> > MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.inf
> > Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonDxe.inf
> >
> > + # PCI
> > + ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
>
> This driver requires gArmTokenSpaceGuid.PcdPciIoTranslation to be set
> to a sane value. Are you sure this is the case for your platforms?
>
Do you mean the IO space for the controller? If yes, I'll set the PCD
to according value I use in board description. I don't have an old
enough endpoint that requires IO space to test :)
Best regards,
Marcin
> > + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
> > + MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > +
> > # Console packages
> > MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> > MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> > diff --git a/Silicon/Marvell/Armada7k8k/Armada7k8k.fdf b/Silicon/Marvell/Armada7k8k/Armada7k8k.fdf
> > index 3a320ba..e22f514 100644
> > --- a/Silicon/Marvell/Armada7k8k/Armada7k8k.fdf
> > +++ b/Silicon/Marvell/Armada7k8k/Armada7k8k.fdf
> > @@ -174,6 +174,11 @@ FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
> > INF MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.inf
> > INF Silicon/Marvell/Drivers/SdMmc/XenonDxe/XenonDxe.inf
> >
> > + # PCI
> > + INF ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe.inf
> > + INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
> > + INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
> > +
> > # Multiple Console IO support
> > INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
> > INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
> > --
> > 2.7.4
> >
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#40800): https://edk2.groups.io/g/devel/message/40800
Mute This Topic: https://groups.io/mt/31553481/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
More information about the edk2-devel-archive
mailing list