[edk2-devel] [edk2-platforms][PATCH 1/3] Platform/Ampere: Add Readme.md

Thu Dec 3 04:04:00 UTC 2020

From: Phong Vo <phong at os.amperecomputing.com>

Add initial version of Readme.md for Ampere platform

Cc: Leif Lindholm <leif at nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney at intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel at arm.com>
Cc: Nate DeSimone <nathaniel.l.desimone at intel.com>

Signed-off-by: Phong Vo <phong at os.amperecomputing.com>
---
 Platform/Ampere/Readme.md | 167 ++++++++++++++++++++
 1 file changed, 167 insertions(+)

diff --git a/Platform/Ampere/Readme.md b/Platform/Ampere/Readme.md
new file mode 100644
index 000000000000..c93b35a62e84
--- /dev/null
+++ b/Platform/Ampere/Readme.md
@@ -0,0 +1,167 @@
+# Overview
+
+This document provides the guideline to build UEFI firmware for Ampere Computing's arm64 reference platforms.
+
+Platform code is located under Platform/Ampere/{Platform Name}Pkg.
+
+Silicon code is located under Silicon/Ampere/Ampere{SoC Name}Pkg.
+
+# How to build (Linux Environment)
+
+## Build machines
+
+The build instructions provided in this document are supported on the following operating systems:
+
+- Ubuntu 18.04 (x86)
+- CentOS 8.2 (x86)
+
+However, it does not mean this guideline is not applicable for other Ubuntu/CentOS versions,
+or other Linux distributions. You may, at your own risk, try it on other Linux distributions
+if all steps below are performed correctly.
+
+## Essential development tools
+
+The following is the list of tools needed for development: `bison, build-essential, bzip2, default-jre, flex
+gawk, gpg, libc6:i386, libgcc1:i386, openssl, libssl-dev, m4, make, python, python3-distutils, tar, uuid-dev wget`
+
+They can be installed using standard OS distro's `apt-get` (for Ubuntu) or `yum` (for CentOS).
+
+## Toolchain
+
+### GCC for aarch64
+
+Ampere provides GCC toolchains
+[aarch64-ampere-linux-gnu](https://cdn.amperecomputing.com/tools/compilers/cross/8.3.0/ampere-8.3.0-20191025-dynamic-nosysroot-crosstools.tar.xz)
+
+Linaro provides GCC toolchains for
+[aarch64-linux-gnu](https://releases.linaro.org/components/toolchain/binaries/latest/aarch64-linux-gnu/)
+
+Throughout this document, Ampere toolchain is assumed to be installed at location /opt/toolchain/.
+
+When cross compiling, it is necessary to provide the appropriate compilation prefix depending on
+whether Ampere toolchain or Linaro toolchain is used.
+
+Target architecture | Cross compilation prefix
+--------------------|-------------------------
+AARCH64             | aarch64-linux-gnu-  (Linaro toolchain)
+AARCH64             | aarch64-ampere-linux-gnu- (Ampere toolchain)
+
+### Intel ASL+ Optimizing Compiler/Disassembler
+
+Download and install the ISAL compiler as follows:
+
+```bash
+$ wget https://acpica.org/sites/acpica/files/acpica-unix2-20200110.tar.gz
+$ tar xzf acpica-unix2-20200110.tar.gz
+$ cd acpica-unix2-20200110
+$ make && sudo make install
+$ iasl -v
+```
+
+## Obtaining source code
+
+1. Create a new folder (directory) on your local development machine
+for use as your workspace. This example uses `/work/git/tianocore`, modify as
+appropriate for your needs.
+
+   ```bash
+   $ export WORKSPACE=/work/git/tianocore
+   $ mkdir -p $WORKSPACE
+   $ cd $WORKSPACE
+   ```
+
+2. Into that folder, clone:
+
+   ```bash
+   $ git clone --recurse-submodules https://github.com/AmpereComputing/edk2.git
+   $ git clone --recurse-submodules https://github.com/AmpereComputing/edk2-platforms.git
+   ```
+
+Set up a PACKAGES_PATH to point to the locations of these three repositories:
+`$ export PACKAGES_PATH=$PWD/edk2:$PWD/edk2-platforms`
+
+## Manual building
+
+### Additional environment setup
+
+```bash
+$ export CROSS_COMPILER_PATH=/opt/toolchain/ampere-8.3.0-20191025-dynamic-nosysroot/bin
+$ export PATH=${CROSS_COMPILER_PATH}:${PATH}
+$ export CROSS_COMPILE=aarch64-ampere-linux-gnu-
+$ export GCC5_AARCH64_PREFIX=${CROSS_COMPILE}
+```
+
+1. Set up the build environment (this will modify your environment variables)
+
+   `$ . edk2/edksetup.sh`
+
+   (This step _depends_ on **WORKSPACE** being set as per above.)
+
+2. Build BaseTools
+
+   `make -C edk2/BaseTools`
+
+   (BaseTools can currently not be built in parallel, so do not specify any `-j`
+   option, either on the command line or in a **MAKEFLAGS** environment
+   variable.)
+
+### Build options
+
+There are a number of options that can (or must) be specified at the point of
+building. Their default values are set in `edk2/Conf/target.txt`. If we are
+working only on a single platform, it makes sense to just update this file.
+
+target.txt option | command line | Description
+------------------|--------------|------------
+ACTIVE_PLATFORM   | `-p`         | Description file (.dsc) of platform
+TARGET            | `-b`         | One of DEBUG, RELEASE or NOOPT.
+TARGET_ARCH       | `-a`         | Architecture to build for. In our case, use AARCH64.
+TOOL_CHAIN_TAG    | `-t`         | Toolchain profile to use for building. In our case, use GCC5.
+
+There is also MAX_CONCURRENT_THREAD_NUMBER (`-n`), roughly equivalent to
+`make -j`.
+
+When specified on command line, `-b` can be repeated multiple times in order to
+build multiple targets sequentially.
+
+After a successful build, the resulting images can be found in
+`Build/{Platform Name}/{TARGET}_{TOOL_CHAIN_TAG}/FV`.
+
+For example,
+`Build/Jade/RELEASE_GCC5/FV`
+
+### Build a platform
+
+The main build process _can_ run in parallel - so figure out how many threads we
+have available.
+
+```bash
+$ getconf _NPROCESSORS_ONLN
+8
+```
+
+Set up the build to use a little more than that:
+
+```bash
+$ NUM_CPUS=$((`getconf _NPROCESSORS_ONLN` + 2))
+```
+
+Now build the UEFI image:
+
+```bash
+$ cd edk2-platforms && build -a AARCH64 -t GCC5 -b RELEASE -D SECURE_BOOT_ENABLE -p Platform/Ampere/JadePkg/Jade.dsc
+```
+
+(Note that the description file gets resolved by the build command through
+searching in all locations specified in **PACKAGES_PATH**.)
+
+## Additional build tools
+
+Ampere provides additional tools and documentation for automating the manual process described above,
+and for building a final Tianocore UEFI image that can be flashed on the target system.
+
+To use these tools, clone the following to the **WORKSPACE** location:
+
+```bash
+$ git clone https://github.com/AmpereComputing/edk2-ampere-tools.git
+```
-- 
2.17.1



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68211): https://edk2.groups.io/g/devel/message/68211
Mute This Topic: https://groups.io/mt/78678099/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-



