[edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for drives in RAID mode

[Wu, Hao A]

> -----Original Message-----
> From: Vitaly Cheptsov <cheptsov at ispras.ru>
> Sent: Friday, December 11, 2020 5:25 PM
> To: devel at edk2.groups.io
> Cc: Vitaly Cheptsov <cheptsov at ispras.ru>; Wang, Jian J
> <jian.j.wang at intel.com>; Wu, Hao A <hao.a.wu at intel.com>; Albecki,
> Mateusz <mateusz.albecki at intel.com>; Laszlo Ersek <lersek at redhat.com>
> Subject: [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for
> drives in RAID mode
> 
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3118
> 
> This resolves the problem of using drivers connected to Intel G33 builtin
> SATA controller when run from DuetPkg when it can only be configured in
> RAID mode through the firmware settings.


Hello Vitaly,

If my understanding is correct, this driver (SataControllerDxe) and the
AtaAtapiPassThru driver are written for non-RAID case only.

Both drivers (especially AtaAtapiPassThru) do not distinguish logic/physical
SCSI channels, which I think only works for the non-RAID case. I am not sure if
this patch series will have an impact to existing RAID drivers.

Best Regards,
Hao Wu


> 
> Cc: Jian J Wang <jian.j.wang at intel.com>
> Cc: Hao A Wu <hao.a.wu at intel.com>
> Cc: Mateusz Albecki <mateusz.albecki at intel.com>
> Cc: Laszlo Ersek <lersek at redhat.com>
> Signed-off-by: Vitaly Cheptsov <cheptsov at ispras.ru>
> ---
>  MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> index ab06e2833c..301335c967 100644
> --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> @@ -324,7 +324,7 @@ SataControllerSupported (
>      return EFI_UNSUPPORTED;
>    }
> 
> -  if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
> +  if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData) || IS_PCI_RAID
> + (&PciData)) {
>      return EFI_SUCCESS;
>    }
> 
> @@ -465,7 +465,7 @@ SataControllerStart (
>    if (IS_PCI_IDE (&PciData)) {
>      Private->IdeInit.ChannelCount = IDE_MAX_CHANNEL;
>      Private->DeviceCount          = IDE_MAX_DEVICES;
> -  } else if (IS_PCI_SATADPA (&PciData)) {
> +  } else if (IS_PCI_SATADPA (&PciData) || IS_PCI_RAID (&PciData)) {
>      //
>      // Read Ports Implemented(PI) to calculate max port number (0 based).
>      //
> --
> 2.24.3 (Apple Git-128)



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68760): https://edk2.groups.io/g/devel/message/68760
Mute This Topic: https://groups.io/mt/78875596/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-