[edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for drives in RAID mode

[Michael D Kinney]

I agree it would be better to configure the platform so the SATA controller is in its non-RAID mode.

If the controller is in RAID mode, then the OS that is booted may have a SATA RAID driver
that can configure the drives in RAID mode.  Then, if the UEFI FW treats it as non RAID, it
may not be bootable, and configuration actions in UEFI may corrupt data on the RAID configured
drives.  For this reason, I am not in favor of adding a PCD.

Mike

> -----Original Message-----
> From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Wu, Hao A
> Sent: Monday, December 14, 2020 5:53 PM
> To: Ni, Ray <ray.ni at intel.com>; devel at edk2.groups.io; cheptsov at ispras.ru
> Cc: Wang, Jian J <jian.j.wang at intel.com>; Albecki, Mateusz <mateusz.albecki at intel.com>; Laszlo Ersek <lersek at redhat.com>
> Subject: Re: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe: Add support for drives in RAID mode
> 
> > -----Original Message-----
> > From: Ni, Ray <ray.ni at intel.com>
> > Sent: Tuesday, December 15, 2020 9:45 AM
> > To: devel at edk2.groups.io; cheptsov at ispras.ru
> > Cc: Wang, Jian J <jian.j.wang at intel.com>; Wu, Hao A <hao.a.wu at intel.com>;
> > Albecki, Mateusz <mateusz.albecki at intel.com>; Laszlo Ersek
> > <lersek at redhat.com>
> > Subject: RE: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe:
> > Add support for drives in RAID mode
> >
> > DuetPkg was removed from edk2.
> > If the change is specially for DUET use case, I am afraid we cannot accept this
> > change.
> >
> > Hao,
> > Can this change benefit a general use case?
> 
> 
> Hello Ray,
> 
> My understanding to the proposed PCD is that drives behind a RAID mode SATA controller can be configured to working in
> non-RAID mode (acting like individual drives).
> 
> As for the DuetPkg, below is a previous comment from Vitaly:
> "there is no firmware preference for that (Hao: configure the controller to non-RAID mode). The firmware does not support
> UEFI, and we are running through DuetPkg."
> 
> Best Regards,
> Hao Wu
> 
> 
> >
> > Thanks,
> > Ray
> >
> > > -----Original Message-----
> > > From: devel at edk2.groups.io <devel at edk2.groups.io> On Behalf Of Vitaly
> > > Cheptsov
> > > Sent: Friday, December 11, 2020 5:25 PM
> > > To: devel at edk2.groups.io
> > > Cc: Vitaly Cheptsov <cheptsov at ispras.ru>; Wang, Jian J
> > > <jian.j.wang at intel.com>; Wu, Hao A <hao.a.wu at intel.com>; Albecki,
> > > Mateusz <mateusz.albecki at intel.com>; Laszlo Ersek <lersek at redhat.com>
> > > Subject: [edk2-devel] [PATCH 1/2] MdeModulePkg/SataControllerDxe:
> > Add
> > > support for drives in RAID mode
> > >
> > > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3118
> > >
> > > This resolves the problem of using drivers connected to Intel G33
> > > builtin SATA controller when run from DuetPkg when it can only be
> > > configured in RAID mode through the firmware settings.
> > >
> > > Cc: Jian J Wang <jian.j.wang at intel.com>
> > > Cc: Hao A Wu <hao.a.wu at intel.com>
> > > Cc: Mateusz Albecki <mateusz.albecki at intel.com>
> > > Cc: Laszlo Ersek <lersek at redhat.com>
> > > Signed-off-by: Vitaly Cheptsov <cheptsov at ispras.ru>
> > > ---
> > >  MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > > b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > > index ab06e2833c..301335c967 100644
> > > --- a/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > > +++ b/MdeModulePkg/Bus/Pci/SataControllerDxe/SataController.c
> > > @@ -324,7 +324,7 @@ SataControllerSupported (
> > >      return EFI_UNSUPPORTED;
> > >    }
> > >
> > > -  if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
> > > +  if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData) ||
> > > + IS_PCI_RAID (&PciData)) {
> > >      return EFI_SUCCESS;
> > >    }
> > >
> > > @@ -465,7 +465,7 @@ SataControllerStart (
> > >    if (IS_PCI_IDE (&PciData)) {
> > >      Private->IdeInit.ChannelCount = IDE_MAX_CHANNEL;
> > >      Private->DeviceCount          = IDE_MAX_DEVICES;
> > > -  } else if (IS_PCI_SATADPA (&PciData)) {
> > > +  } else if (IS_PCI_SATADPA (&PciData) || IS_PCI_RAID (&PciData)) {
> > >      //
> > >      // Read Ports Implemented(PI) to calculate max port number (0 based).
> > >      //
> > > --
> > > 2.24.3 (Apple Git-128)
> > >
> > >
> > >
> > > -=-=-=-=-=-=
> > > Groups.io Links: You receive all messages sent to this group.
> > > View/Reply Online (#68707):
> > > https://edk2.groups.io/g/devel/message/68707
> > > Mute This Topic: https://groups.io/mt/78875596/1712937
> > > Group Owner: devel+owner at edk2.groups.io
> > > Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni at intel.com]
> > > -=-=-=-=-=-=
> > >
> 
> 
> 
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#68834): https://edk2.groups.io/g/devel/message/68834
Mute This Topic: https://groups.io/mt/78875596/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-